YAMon 2.0.1.zip doesn't have Setup folder. Should we mkdir Setup and move strings and www into it, along all sh script files?
i did yes and just moved all files into it
NUTS!!!! I've replace the zip file so that the Setup folder is there now (no other changes to the coded contained in the archive though so I did not change the version number)
Posted: Thu Mar 27, 2014 21:01 Post subject: Fresh install of 2.0.1 - no download data...
I just did a fresh install of YAMon2 -- removed original YAMon and all the files (including in tmp/www). The only old file I used was a converted user file now named users.js
All seems to work except the downloads column - shows all zeros. Uploads is working properly.
I looked in the new 2014-03-27-hourly_data.js file, all the lines show, for example:
I also made a fresh install.Maybe I have made mistakes in the configuration but I get no download readings either.
In yamon2.sh:
In 5 lines (332, 465, 475, 580, 680) I believe a space is needed between some quotes(") and the brackets(]) otherwise you get an error (sh: missing ]). Lines may differ from editor to editor. Searching "] will give the correct ones
I also have lots of errors sh: bad number which I believe is due to undeclared variables. Not sure why they don't get read from the config file. Declaring them in the beginning of the script seems to solve the problem.
I also made a fresh install.Maybe I have made mistakes in the configuration but I get no download readings either.
In yamon2.sh:
In 5 lines (332, 465, 475, 580, 680) I believe a space is needed between some quotes(") and the brackets(]) otherwise you get an error (sh: missing ]). Lines may differ from editor to editor. Searching "] will give the correct ones
I also have lots of errors sh: bad number which I believe is due to undeclared variables. Not sure why they don't get read from the config file. Declaring them in the beginning of the script seems to solve the problem.
...
Not sure if these remarks are correct, but I hope they are helpfull.
Oh good lord... to think that I once worked in QA (many years ago).
Thanks for bringing these gaffs to my attention... Your detailed description helps a lot! I've fixed the issues you've raised and v2.0.2 will be posted to the first message in this thread ASAP.
I'm really sorry for (and REALLY embarrassed by) this. But honest, things had been working properly on my machine! And my router does not complain about undeclared variables?!?
Joined: 25 Dec 2010 Posts: 295 Location: Twin Cities, MN
Posted: Fri Mar 28, 2014 16:18 Post subject:
Mizehra wrote:
Looks like 2.0.2 is still not showing download values.
same here..its never showed DL...
also, after converting users.file, the colors dont work..the right colors were copied correctly..im using blue, red etc..not hexadecimal.. _________________ NETGEAR R9000 | RT | 40134 NETGEAR R7800 | AP | 40134
It also might be worth noting that on my E2000 the banner doesn't show up, but on my (unstable, that's why I'm not using it) EA 6500v2, the banner shows up fine.
It also might be worth noting that on my E2000 the banner doesn't show up, but on my (unstable, that's why I'm not using it) EA 6500v2, the banner shows up fine.
There is a sequencing issue in the app at the moment. Currently, the script presupposes that the banner strings are in the default installation directory location (`/opt/YAMon2/). If you have installed elsewhere, I do not know the real location until I've read your config.file (but try to display the banner and perhaps another message or two before that happens)...
A temporary fix is to change the default path in yamon2.sh:
e.g., change line ~40 so that it points to your installation directory:
Code:
d_baseDir="/opt/YAMon2/"
This is not an ideal solution because I'll clobber your changes every time I post an update.
In a little while (once I get the #$%^?! compatibility issues fixed) I will post an update in which I reorder things so the path to the banners is read properly from the config file.
I'm currently at my day job but I think I have something that'll work now. (Thanks to a bunch of folks who've been helping out with this)
I'll need to run it at home for a bit but hopefully will be able to get an update later this evening. Rather than posting it to everyone, I'm going to send it to a few selective folks...
Any volunteers? Is it safe to assume you want in, Andy?
I'm currently at my day job but I think I have something that'll work now. (Thanks to a bunch of folks who've been helping out with this)
I'll need to run it at home for a bit but hopefully will be able to get an update later this evening. Rather than posting it to everyone, I'm going to send it to a few selective folks...
Any volunteers? Is it safe to assume you want in, Andy?
Joined: 27 Sep 2008 Posts: 446 Location: Port Of Spain
Posted: Wed Apr 02, 2014 0:36 Post subject:
al_c wrote:
andyrav wrote:
hi
any update for the missing download values?
cheers
andy
I'm currently at my day job but I think I have something that'll work now. (Thanks to a bunch of folks who've been helping out with this)
Al
Thanks al for the work on version 2 of YAMon and all the hard work you are doing for us. I know you will sort out the downloads soon. Feel free to send me a copy to test. _________________ Buffalo WZR-600DHP - 23838
TP Link WDR3600 - 21676
Linksys WRT54G-TM - 12548 (NEWD Eko Mega)
Thank very much to Spanman, NiTrus, Andyrav and Mizehra for their testing, assistance, and advice.
Todd (tsaylor) if you're still following this, I should've heeded your advice several months ago to break the downloads & uploads in two data structures...
Please note that a number of features in the reports still aren't working... - in particular:
- the daily tab only allows you to see data for the current day... the next/previous buttons are not working yet
- the monthly report only shows (partially complete) data for the current month.
- the montly breakdown report is not working at all yet
I will be working to get those features re-implelented ASAP.