If that's all the output you get, it's time for a new router.
Much more booting are present,but am not let it here sorry.
dd-wrt kong are on,but am cant get in because password problems am sorry.Crtl-C no respond try couple of times.
its boot up,but cant get in beacuse password miss.
Let us see more. Attach a text file if needed.
Also are you sure you have your cable connected correctly?
Are you following kongs guide at the myopenrouter website? _________________ I am far from a guru, I'm barely a novice.
What does 3500 mean?
Is your cable attached like in the picture at this link?
If yes, you should be able to stop the cfe. Start hitting control +c even before ou turn on the router. Keep tapping them as the router boots up.
If you touch your rx and tx wires are your keystrokes reported in putty? _________________ I am far from a guru, I'm barely a novice.
Hey
With TX out still booting, mybee its wrong usb seriell. Silicon labs CP210xusb to uart brigde Com10 and another
Profilic usb to seriell comport Com2
yes am use your link openrouter to work it out but no luck..
Touch the rx and tx together from the cable and type some keys. Do they show up in putty or whatever program you are using? _________________ I am far from a guru, I'm barely a novice.
Posted: Sun Jul 23, 2017 14:59 Post subject: Red Light
This turns off all the lights except the red one.
Code:
root@mtwrt:~# et robowr 0x0 0x18 0x1ff
root@mtwrt:~# et robowr 0x0 0x18 0x0
root@mtwrt:~# et robowr 0x0 0x1a 0x0
root@mtwrt:~# for i in 2 3 8 9 12 13 17 18 ; do gpio enable $i ; done
root@mtwrt:~# for i in 14 15 ; do gpio disable $i ; done
Posted: Mon Jul 24, 2017 23:49 Post subject: R7000 dd-wrt kong entware transmission autostart
Hi,
This is a great forum !
I have a r7000 with the latest kong release
I installed transmission via entware.
Transmission is working find. The problem i have is i am unable to autostart the transmission-daemon at reboot. I need to start it using telnet from my pc.
Look like the system is ignoring my init.b.
I have 4 partitions on the usb drive
sda1=NTFS
sda2=ext4 /opt
sda3=ext4 /jffs
sda4=linux swap
Transmission was installed on sda2 automounted to /opt.
This is a listing of threads that HELP people do the most viable and reliable things. I would start a new thread with specific questions NOT found as links on the first page.
Posted: Sun Aug 20, 2017 20:06 Post subject: Re: R7000 dd-wrt kong entware transmission autostart
slappy2 wrote:
Hi,
This is a great forum !
I have a r7000 with the latest kong release
I installed transmission via entware.
Transmission is working find. The problem i have is i am unable to autostart the transmission-daemon at reboot. I need to start it using telnet from my pc.
Look like the system is ignoring my init.b.
I have 4 partitions on the usb drive
sda1=NTFS
sda2=ext4 /opt
sda3=ext4 /jffs
sda4=linux swap
Transmission was installed on sda2 automounted to /opt.
Any suggestion?
For making entware-ng's init.d scripts autostart you need to execute /opt/etc/init.d/rc.unslung, thus executing the other scrips in there.
So you need to save: