I'm running Firmware: DD-WRT v3.0-r27506 (07/09/15) std from a .chk file I downloaded from http://desipro.de/ddwrt/K3-AC-Arm/ onto my new R7000. It is running fine.
I want to update, especially to use OpenVPN 2.3.8. Today, there are several files in that site dated 07-Sep-2015.
From what I see posted here, it seems I should NOT use dd-wrt.K3_R7000.chk to upgrade, but rather I should use dd-wrt.v24-K3_AC_ARM_STD.bin ? Is this correct?
If this is correct, then I assume I can just upload the .bin file into the router and re-configure it according the notes I made when first installing the .chk file?
Thanks.
Did you get openvpn client working well on the 9/7 Kong build? I have it running on my Asus 68u but experienced openvpn performance issues.
I'm having issues with VPN disconnecting which seems to be a known issue and see that 26160 is the last known version to have stable VPN. Searching through BS and Kong sites I can't find this version. Can someone help and point me to a place to download it?
Posted: Fri Oct 16, 2015 3:50 Post subject: Wifi Settings?
Guys, Thanks for all your help recently! I really appreciate it!
I'm kinda confused on what are the best settings for my wifi profile. I went thru the guides and it seems that there is some confusion on whether to used mixed or not? I'm mostly concerned about my 2.4 settings as I have multiple smart home and SONOS products that use that frequency. Is the current config the best? I'm living in a very congested apartment building.
Someone tried to use Policy Based Routing with R7000 and DD-WRT Kong Mod firmware?
I want something like this:
Code:
ip rule add from 192.168.1.0/24 table 100
ip rule add from 192.168.2.0/24 table 200
ip route add default via 10.0.0.1 dev ppp0 table 100
ip route add default via 10.0.1.1 dev vlan3 table 200
I try to execute this commads. But I do not see any changes in routing tables.
"ip route list tabel table 100" and "ip rule list" show nothing...[/code]