Posted: Thu Oct 23, 2014 17:16 Post subject: TP-Link MR3220 V2 Support
hi Folks
Tried searching quite a bit but to no avail. Supported routers page says this isnt supported. Can anyone definitively say whether MR_3220_v2 is supported for DD-WRT and if yes which ROM.
Hi Sash
Could you please help with with the bin file. I searched everywhere but couldnt get the one you mentioned. Wouldnt want to risk bricking my router though it is a cheap one.
Also I dont need USB support and WAN support should do.
Also if i install, could i go back to TP-Link firmware or is that impossible.
Apologies again if my question sounds novice like. I hope to hop onto the bandwagon and start experimenting.
thanks in advance
Hello GreyDoc!
I just installed the "factory-to-ddwrt_MR3220v2 (WR710Nv2).bin"... and everything is working properly.
Thank you!
In the case of having to return the TL-MR3220v2 to the original firmware, Can I use the "wr710nv2_webrevert.rar" or the "mr3020nv1_webrevert.rar" ?
or it is necessary to have an specific modified version of webrevert for the MR3220v2?
Thanks!
In the case of having to return the TL-MR3220v2 to the original firmware, it is necessary to have an specific modified version of webrevert for the MR3220v2?
At the moment I'm going to use DD-WRT, but probably, in a future, I will need to return to the original firmware.
Would it be possible to get a mr3220v2 webrevert version?
Thanks for you time GreyDoc
In the case of having to return the TL-MR3220v2 to the original firmware, it is necessary to have an specific modified version of webrevert for the MR3220v2?
yup, contact me if you want to revert.
zapple wrote:
At the moment I'm going to use DD-WRT, but probably, in a future, I will need to return to the original firmware.
Would it be possible to get a mr3220v2 webrevert version?
Thanks for you time GreyDoc
Please i need help, my router MR3220V2 with DD-wrt, i install from bin factory-to-ddwrt_MR3220v2 (WR710Nv2).bin, i am configuring static ip and no ping internet and GW please help me!
Please i need help, my router MR3220V2 with DD-wrt, i install from bin factory-to-ddwrt_MR3220v2 (WR710Nv2).bin, i am configuring static ip and no ping internet and GW please help me!
Posted: Tue Mar 08, 2016 9:17 Post subject: i went back to factory fw after having the same issue
sionhrn wrote:
GreyDoc wrote:
zapple wrote:
In the case of having to return the TL-MR3220v2 to the original firmware, it is necessary to have an specific modified version of webrevert for the MR3220v2?
yup, contact me if you want to revert.
zapple wrote:
At the moment I'm going to use DD-WRT, but probably, in a future, I will need to return to the original firmware.
Would it be possible to get a mr3220v2 webrevert version?
Thanks for you time GreyDoc
Please i need help, my router MR3220V2 with DD-wrt, i install from bin factory-to-ddwrt_MR3220v2 (WR710Nv2).bin, i am configuring static ip and no ping internet and GW please help me!
sorry for my english, i am from ARgentina!
thanks in advance!
If you want i can send links how to revert back to factory fw.
Posted: Wed Mar 09, 2016 4:28 Post subject: Re: i went back to factory fw after having the same issue
zapple wrote:
bankanidhi wrote:
If you want i can send links how to revert back to factory fw.
bankanidhi, Have you got the webrevert file for the MR3220v2? that would b
bankanidhi wrote:
sionhrn wrote:
GreyDoc wrote:
zapple wrote:
In the case of having to return the TL-MR3220v2 to the original firmware, it is necessary to have an specific modified version of webrevert for the MR3220v2?
yup, contact me if you want to revert.
zapple wrote:
At the moment I'm going to use DD-WRT, but probably, in a future, I will need to return to the original firmware.
Would it be possible to get a mr3220v2 webrevert version?
Thanks for you time GreyDoc
Please i need help, my router MR3220V2 with DD-wrt, i install from bin factory-to-ddwrt_MR3220v2 (WR710Nv2).bin, i am configuring static ip and no ping internet and GW please help me!
sorry for my english, i am from ARgentina!
thanks in advance!
If you want i can send links how to revert back to factory fw.
e great, thank you.
HI i resolve the problem!,
the default firmware brings LAN 4 WAN port, what I did was modify the bridge originally brings ATH0 and ETH1 as WAN ETH0, I did put on the bridge and the ATH0 ETH0 as eth1 WAN
Posted: Wed Mar 09, 2016 7:45 Post subject: Re: i went back to factory fw after having the same issue
sionhrn wrote:
HI i resolve the problem!,
the default firmware brings LAN 4 WAN port, what I did was modify the bridge originally brings ATH0 and ETH1 as WAN ETH0, I did put on the bridge and the ATH0 ETH0 as eth1 WAN
I installed "factory-to-ddwrt_MR3220v2 (WR710Nv2).bin" in my MR3220v2.4 and tried to revert back to stock with "wr710nv2_webrevert.bin". Now i cannot access the router via web ui. Ping says "router unreachable". Please help.