It 's modified to be used with the recent DD-WRT builds from BS and Kong Builds 23900 upwards and was tested with my R7000 running both the last BS builds as well 23900 Kong OLDD.
Unlike the Original Script this doesn't require Bash 4, Optware or any special Binaries at all (besides the ones being delivered with the mentioned build). So it should work with any ARM based router running the above Build or similar.
The only requirements are of course Privoxy and /jffs (I'm not going into detail as to how to create a /jffs storage). Privoxy doesn't even have to be build into the Firmware itself - however if you use (like me) Build 25408 or newer I'd recommend to copy the initial Privoxy config from /etc/privoxy/ to /jffs/etc/privoxy/ or the directory you'd like to store your privoxy filterlists at.
You can of course use the script in a crontab but I'm not going into details on that either since it 's pretty easy to do in itself and there are various topics about that to be found in the Forum. Please refrain from asking questions about that here (really it 's only a single line - you should be able to figure that out yourself).
Download, Install Instructions, Readme and Changelog is now on Github (as of 2014/15/12):
on TOP is see that privoxy starts with 50%cpu and than it crashed :/ and start again....
if i start provixy manualy i get mesg: fatal error invalid argument in config...
i use Kongs 24710M
hope you can help whats going wrong.
ahh Logfile:
Code:
2014-11-28 17:18:31.909 b6f23bbc Fatal error: can't load actions file '/jffs/privoxy/user.action': Invalid argument. Note that beginning with Privoxy 3.0.7, actions files have to be specified with their complete file names.
Netgear R7000 running DD-WRT BS 25648 with wl0_ampdu=off as Router
ASUS AC66U running DD-WRT Kong 23900 OLDD downclocked to 500 MHz as Repeater
ASUS N66U running 374.43_2 MerlinWRT with BL1.09 downclocked to 500MHz as WET for my Mainmachine
Linksys E2000 running Tomato v121 as WET for my Synology DS214play and Minix Neo X7 Mini
Well I don't get any Popups there (at least not on the mainsite). Did you subscribe to the Malware-List as well? _________________ The Netgear R7000 is a beast!
Netgear R7000 running DD-WRT BS 25648 with wl0_ampdu=off as Router
ASUS AC66U running DD-WRT Kong 23900 OLDD downclocked to 500 MHz as Repeater
ASUS N66U running 374.43_2 MerlinWRT with BL1.09 downclocked to 500MHz as WET for my Mainmachine
Linksys E2000 running Tomato v121 as WET for my Synology DS214play and Minix Neo X7 Mini
Netgear R7000 running DD-WRT BS 25648 with wl0_ampdu=off as Router
ASUS AC66U running DD-WRT Kong 23900 OLDD downclocked to 500 MHz as Repeater
ASUS N66U running 374.43_2 MerlinWRT with BL1.09 downclocked to 500MHz as WET for my Mainmachine
Linksys E2000 running Tomato v121 as WET for my Synology DS214play and Minix Neo X7 Mini
Netgear R7000 running DD-WRT BS 25648 with wl0_ampdu=off as Router
ASUS AC66U running DD-WRT Kong 23900 OLDD downclocked to 500 MHz as Repeater
ASUS N66U running 374.43_2 MerlinWRT with BL1.09 downclocked to 500MHz as WET for my Mainmachine
Linksys E2000 running Tomato v121 as WET for my Synology DS214play and Minix Neo X7 Mini
This is awsome, just applied this to my r7000, changed the script to run from usb rather than jffs and added the easylist privacy list.
However I can't seem to get rid of youtube ads (30sec ads).
Also is there a way to allow adfly but block the ads, currently with the chrome extension adfly is allowed you wait 5 seconds for the redirect button but see no ad, with prioxy the site itself is blocked and when you click proceed it works but you get ads and popups.
Using the below adblock which blocks YouTube ads, thought I could add it's custom filter but I don't think it will work with priory.
Could you post that filter which block the YT ads?
I think looking at the way YT displays it 's Video ADs
it 's pretty hard to do that with simple filters in itself. _________________ The Netgear R7000 is a beast!
Netgear R7000 running DD-WRT BS 25648 with wl0_ampdu=off as Router
ASUS AC66U running DD-WRT Kong 23900 OLDD downclocked to 500 MHz as Repeater
ASUS N66U running 374.43_2 MerlinWRT with BL1.09 downclocked to 500MHz as WET for my Mainmachine
Linksys E2000 running Tomato v121 as WET for my Synology DS214play and Minix Neo X7 Mini
If you add the adblock extension and go into options/filter list, you should see the custom adblock list. If you hover over the text it will show you the url. I think that's what's blocking the YouTube ads.
However I don't think you're able to block YT Video ADs easily since YouTube forces the Browser to run over HTTPS so Privoxy will only work when setup in Non-Transparency Mode and when setup on every Browser / Client.
should be a start to block the Video ADs (don't expect it to just work since I didn't test the above).
But honestly?
Skip out on YouTube entirely and use Vimeo instead (yes, really).
YouTube has become really shitty the last years due to Google 's policy and behavior and I'm skipping as much as I can to be honest. And that 's not only due to Video ADs but also due to their broken Comment System and Google Plus integration but also due to them blocking half or more of their Videos in Germany due to their legal issues with the GEMA acting like spoiled kids.
Or just use an Adblocker for those Ads. _________________ The Netgear R7000 is a beast!
Netgear R7000 running DD-WRT BS 25648 with wl0_ampdu=off as Router
ASUS AC66U running DD-WRT Kong 23900 OLDD downclocked to 500 MHz as Repeater
ASUS N66U running 374.43_2 MerlinWRT with BL1.09 downclocked to 500MHz as WET for my Mainmachine
Linksys E2000 running Tomato v121 as WET for my Synology DS214play and Minix Neo X7 Mini