Your reports for Broadcom units are highly appreciated !
Router:
Firmware:
Kernel:
Status:
Reset:
Errors:
This build thread is for reporting successes and problem with loading this experimental test build. This is important info for developers and users. Always state your hardware and SPECIFIC build (e.g. 27775_NEWD-2_K2.6_mega-nv64k.bin). Do not ask questions about your specific router or how to configure it in this thread; create your own thread to discuss any specific problems you have or need resolved. Please also do not respond to such questions. This thread is to report info, not to seek it. Posts that do not add to understanding this build will be deleted. Make sure you know how to flash properly and the risk before using this build. It is important to adhere to these requirements, to keep this thread from becoming impossibly long and useless. If you don't know what build to flash and how to flash properly and have a means of recovery if things should go wrong, do NOT flash this experimental test build. _________________ THERE ARE NO STRANGERS HERE; ONLY FRIENDS YOU HAVEN'T YET MET.
________________________________________________________________________________________________________
DD-WRT CHANGELOG | DEVICES | DD-WRT BUILDS | KONG BUILDS | UNOFFICIAL BUILDS | DD-WRT in VIRTUALBOX
Last edited by KrypteX on Mon Sep 07, 2015 20:23; edited 2 times in total
Netgear WNDR3700v3
DD-WRT v3.0-r27775 mega (09/07/15)
Linux 3.10.87 #9559 Mon Sep 7 10:37:07 CEST 2015 mips
[dd-wrt.v24-27775_NEWD-2_K3.x_mega-nv64k.bin]
NO reset update live
previous
DD-WRT v3.0-r27745 (08/25/15)
Linux 3.10.87 #9391 Tue Aug 25 08:51:51 CEST 2015 mips
Using as main router
2.4 & 5 GHz working good
guests on br1 wl0.1 working good
local DNS good
port range forward good
VPN passthrough good
Joined: 09 Nov 2014 Posts: 314 Location: Bakersfield, CA
Posted: Mon Sep 07, 2015 17:22 Post subject:
Router: Linksys e3000
Firmware: dd-wrt.v24-27775_NEWD-2_K3.x_mega-e3000.bin
Previous: dd-wrt.v24-27700_NEWD-2_K3.x_mega-e3000.bin
Kernel: Linux 3.10.87 #9559 Mon Sep 7 10:37:07 CEST 2015 mips
Status: Working as a client bridge just fine.
Reset: Before upgrade via "Restore Factory Settings" GUI, and then after the upgrade.
Errors: None thus far, running well.
Glad to have the reset button back, you never know! Thanks, devs. _________________ Deployed Routers:
Netgear R7800 - 1x build 46979
- Gateway (USB /w Entware, CAKE QoS)
Netgear R7000 - 3x build 46979
Router: Dlink-DIR880L
Firmware: DD-WRT v3.0-r27775 std (09/07/15) (downloaded from dlink-dir880l dir)
Kernel: Linux 3.10.87 #4574 SMP Mon Sep 7 06:56:16 CEST 2015 armv7l
Status: working
Reset: No
Errors: No major errors, Minor errror: 2.4 & 5 Ghz lights on front of router does not work as expected. Turns on during startup end turns off when router is ready.
Your reports for Broadcom units are highly appreciated !
Router:
Firmware:
Kernel:
Status:
Reset:
Errors:
This build thread is for reporting successes and problem with loading this experimental test build. This is important info for developers and users. Always state your hardware and SPECIFIC build (e.g. 27775_NEWD-2_K2.6_mega-nv64k.bin). Do not ask questions about your specific router or how to configure it in this thread; create your own thread to discuss any specific problems you have or need resolved. Please also do not respond to such questions. This thread is to report info, not to seek it. Posts that do not add to understanding this build will be deleted. Make sure you know how to flash properly and the risk before using this build. It is important to adhere to these requirements, to keep this thread from becoming impossibly long and useless. If you don't know what build to flash and how to flash properly and have a means of recovery if things should go wrong, do NOT flash this experimental test build.
Installed Wrt1900AC and no observed issues in nearly six hours of use. Two of these routers with one performing DHCP duty and the other in non-DHCP with static IP and connected via a powerline adapter. Wireless on both ends is solid and older Apple devices working!!! Now to wait and see if it hangs at some point. Thanks!!!
WRT54GSv2
DD-WRT v3.0-r27775 mega (09/07/15)
Linux 2.4.37 #41647 Mon Sep 7 05:59:12 CEST 2015 mips
installed from GUI reset previous
DD-WRT v3.0-r27506 (07/09/15) mega
Linux 2.4.37 #41329 Thu Jul 9 03:39:45 CEST 2015 mips
Client Bridge works very good.
Site Survey NOT working and it kills http for couple minutes.
Repeater Bridge NOT working --
The VAP kills the bridge. Remove VAP and you have a bridge.
Clients connect and athenticate to the VAP but can't get an IP --- no bridge to the main
get alot of this with when you make the VAP ¬
Code:
Dec 31 18:02:15 WRT54GSv2 user.info syslog: nas : NAS daemon successfully stopped
Dec 31 18:02:18 WRT54GSv2 user.info syslog: nas : NAS daemon hanging, send SIGKILL
Dec 31 18:02:18 WRT54GSv2 user.info syslog: NAS : NAS wan (wl0 interface) successfully started
Dec 31 18:02:18 WRT54GSv2 user.info syslog: NAS : NAS lan (wl0.1 interface) successfully started
Dec 31 18:02:33 WRT54GSv2 user.info syslog: nas : NAS daemon successfully stopped
Dec 31 18:02:36 WRT54GSv2 user.info syslog: nas : NAS daemon hanging, send SIGKILL
Dec 31 18:02:36 WRT54GSv2 user.info syslog: NAS : NAS wan (wl0 interface) successfully started
Dec 31 18:02:36 WRT54GSv2 user.info syslog: NAS : NAS lan (wl0.1 interface) successfully started
Dec 31 18:02:51 WRT54GSv2 user.info syslog: nas : NAS daemon successfully stopped
Dec 31 18:02:54 WRT54GSv2 user.info syslog: nas : NAS daemon hanging, send SIGKILL
Dec 31 18:02:54 WRT54GSv2 user.info syslog: NAS : NAS wan (wl0 interface) successfully started
Dec 31 18:02:54 WRT54GSv2 user.info syslog: NAS : NAS lan (wl0.1 interface) successfully started
Dec 31 18:03:09 WRT54GSv2 user.info syslog: nas : NAS daemon successfully stopped
Dec 31 18:03:11 WRT54GSv2 user.info syslog: nas : NAS daemon hanging, send SIGKILL
Dec 31 18:03:12 WRT54GSv2 user.info syslog: NAS : NAS wan (wl0 interface) successfully started
Dec 31 18:03:12 WRT54GSv2 user.info syslog: NAS : NAS lan (wl0.1 interface) successfully started
Dec 31 18:03:27 WRT54GSv2 user.info syslog: nas : NAS daemon successfully stopped
Dec 31 18:03:29 WRT54GSv2 user.info syslog: nas : NAS daemon hanging, send SIGKILL
Dec 31 18:03:30 WRT54GSv2 user.info syslog: NAS : NAS wan (wl0 interface) successfully started
Dec 31 18:03:30 WRT54GSv2 user.info syslog: NAS : NAS lan (wl0.1 interface) successfully started
Dec 31 18:03:45 WRT54GSv2 user.info syslog: nas : NAS daemon successfully stopped
Dec 31 18:03:47 WRT54GSv2 user.info syslog: nas : NAS daemon hanging, send SIGKILL
Dec 31 18:03:48 WRT54GSv2 user.info syslog: NAS : NAS wan (wl0 interface) successfully started
Dec 31 18:03:48 WRT54GSv2 user.info syslog: NAS : NAS lan (wl0.1 interface) successfully started
Dec 31 18:04:02 WRT54GSv2 user.info syslog: nas : NAS daemon successfully stopped
Dec 31 18:04:05 WRT54GSv2 user.info syslog: nas : NAS daemon hanging, send SIGKILL
Dec 31 18:04:05 WRT54GSv2 user.info syslog: NAS : NAS wan (wl0 interface) successfully started
Dec 31 18:04:05 WRT54GSv2 user.info syslog: NAS : NAS lan (wl0.1 interface) successfully started
Dec 31 18:04:21 WRT54GSv2 user.info syslog: nas : NAS daemon successfully stopped
Dec 31 18:04:23 WRT54GSv2 user.info syslog: nas : NAS daemon hanging, send SIGKILL
Dec 31 18:04:23 WRT54GSv2 user.info syslog: NAS : NAS wan (wl0 interface) successfully started
Dec 31 18:04:23 WRT54GSv2 user.info syslog: NAS : NAS lan (wl0.1 interface) successfully started
Dec 31 18:04:38 WRT54GSv2 user.info syslog: nas : NAS daemon successfully stopped
Dec 31 18:04:41 WRT54GSv2 user.info syslog: nas : NAS daemon hanging, send SIGKILL
Dec 31 18:04:41 WRT54GSv2 user.info syslog: NAS : NAS wan (wl0 interface) successfully started
Dec 31 18:04:41 WRT54GSv2 user.info syslog: NAS : NAS lan (wl0.1 interface) successfully started
Dec 31 18:04:56 WRT54GSv2 user.info syslog: nas : NAS daemon successfully stopped
Dec 31 18:04:59 WRT54GSv2 user.info syslog: nas : NAS daemon hanging, send SIGKILL