Router: Linksys E2500 V3
Firmware: DD-WRT v3.0-r29048 mega (02/05/16)
Kernel: Linux 3.10.96 #11399 Fri Feb 5 09:13:34 CET 2016 mips
Status: OK
Reset: No
Errors: No
This is the best build i've ever installed. Some previous build including the last 29002 doesn't work very well. With those builds wireless connection always slower around 10 mbps (i have 50 mbps connection), except wired connection gave me a good result. This new build both wireless and wired connection give me around 45-47 mbps with same configuration.
Router: TPLINK Archer C9
Firmware: DD-WRT v3.0-r29048 std (02/05/16)
Kernel: Linux 4.4.1 #253 SMP Fri Feb 5 05:38:17 CET 2016 armv7l
Status: ok
Reset: No
Errors: No
Router: Buffalo WZR-1750DHP
Firmware: DD-WRT v3.0-r29048 std (02/05/16)
Kernel: Linux 4.4.1 #251 SMP Thu Feb 4 06:38:33 CET 2016 armv7l
Status: Working
Reset: No
Previous: r29002
Errors: No
Router: Buffalo WZR-600DHP2
Firmware: DD-WRT v3.0-r29048 std (02/05/16)
Kernel: Linux 4.4.1 #255 Fri Feb 5 05:44:21 CET 2016 armv7l
Status: Working
Reset: No
Previous: r29002
Errors: No
Joined: 13 Aug 2013 Posts: 6868 Location: Romerike, Norway
Posted: Sun Feb 07, 2016 17:15 Post subject:
Router: Asus RT-ac66u
Firmware: DD-WRT v3.0-r29048 Giga (02/05/16)
Kernel: Linux 3.10.96 #11383 Fri Feb 5 09:00:33 CET 2016 mips
Status: Working
Reset: No
Previous: r29002
Errors: No
Router: Netgear R7000
Firmware: DD-WRT v3.0-r29048 std (02/05/16)
Kernel: Linux 4.4.1 #251 SMP Thu Feb 4 06:38:33 CET 2016 armv7l
Status: Working
Reset: No
Previous: r28942
Errors: Nothing crippling (Still get the occasional "kernel: br0: received packet on vlan1 with own address as source address" message in syslog.
Usb is working fine for me.
jaythree wrote:
Errors: USB storage doesn't work - when I plug in a USB mass storage device the router doesn't see it and nothing shows up in dmesg or /var/log/messages with syslogd enabled. Additionally no entry for the USB mass storage device is created in /dev/. I've tried disabling and reenabling USB storage support in the web UI and don't see anything in the router's logs when I do that, so I'm wondering if something may be broken with enabling USB storage.
Jaythree, what is the USB device formatted to? I'm using FAT32 and it is working without any issues for me. Here's what I have on the USB tab:
Code:
--- /dev/sda1
Block device, size 1.861 GiB (1998291456 bytes)
Windows BOOTMGR boot loader
FAT32 file system (hints score 4 of 5)
Volume size 1.857 GiB (1994096640 bytes, 486840 clusters of 4 KiB)
/dev/sda1 mounted to /tmp/mnt/sda1
Posted: Mon Feb 08, 2016 14:23 Post subject: Archer C7 Ver 2:Build 29048
Router: TP-Link Archer C7-V2
Firmware: DD-WRT v3.0-r29048 std (02/05/16)
Status: Working
Reset: Yes
Errors:LEDs
-System LED not working
-2.4 and 5 GHz LEDs not working
-Ethernet LEDs:Working,all 4
-Internet LED:not working
-WPS LED:always ON (never use WPS)
Virtual interfaces have it's own subnetworks, wireless security, qos and so on - but they have NO mac filter. Add please mac filters for virtual interfaces, or make 2.4ggz and 5ggz mac filters to work on all interfaces of the same band.
Router: Linksys E4200
Firmware: DD-WRT v3.0-r29048 mega (02/05/16)
Kernel: Linux 3.10.96 #11399 Fri Feb 5 09:13:34 CET 2016 mips
Status: OK
Reset: Yes
Errors: No
router seems stable however I am getting absolutely terrible download speeds. I'm not sure my wan port is at 1000gb connect. I do not have QOS or VPN enabled; getting 75mbps download on a 240mbps download line.
watching the routers cpu (through console command top) shows plenty of cpu available during speed test.
Getting tons of disconnections between 2 WZR-D1800H in repeater bridge mode.
The repeater router will go offline wirelessly, for hours, only way to get it to connect to router 1 is to remove encryption, apply, setup encryption, apply.
Router: 2 x RT-AC66U
Firmware: DD-WRT v3.0-r29048 giga (02/05/16)
Kernel: Linux 3.10.96 #11383 Fri Feb 5 09:00:33 CET 2016 mips
Status: WDS Bridge at 5 GHz AC only.
Reset: No
Errors: Yes
Random disconnects. It will lose internet, upon checking the status page wouldn't load, wait a min or 2 and the status page becomes available, status shows great connection but still cant access other side of bridge.
I then reboot and connection becomes active again. _________________ [Charter] E31U2V1 DOCSIS 3.1 - Cable Modem
[Broadcom] Netgear R6300v2 - Main Router - Netgear Stock Firmware
[Broadcom] Linksys WRT54GL -Access points x 2 - DD-WRT v2.4-r37932 mini generic (12/08/18 ) K2.4
[Broadcom] Asus RT-AC66U - Bridges x 2 - DD-WRT v3.0-r29193 giga (03/02/16 ) K3X
[Broadcom] Asus RT-N16 - Access Point - DD-WRT v3.0-r37442 big ( 10/19/18 ) K3X
[Mikrotik] Wap60g - Bridges x 2 - RouterOS v6
Last edited by muckerphuck on Fri Feb 26, 2016 2:26; edited 1 time in total
