DD-WRT :: View topic - Mobilbroadband

Mobilbroadband

DD-WRT Forum Index -> Broadcom SoC based Hardware

Goto page 1, 2 Next

View previous topic :: View next topic

Author

Message

arneande
DD-WRT User

Joined: 07 Nov 2008
Posts: 99

Posted: Fri Feb 05, 2016 16:58 Post subject: Mobilbroadband
Hey Mobilebroadband are not present for build after 13-11-15. Am testing netgear,linksys,Asus. And my conection to the world are 4gor3g arneande Last edited by arneande on Sat Feb 27, 2016 22:52; edited 4 times in total

Sponsor

<Kong>
DD-WRT Guru

Joined: 15 Dec 2010
Posts: 4339
Location: Germany

Posted: Sat Feb 27, 2016 22:35 Post subject:
I have two adapters running on a R7000, Huawei E1750 and E3372, you have to provide us with lots more info. Right now you provide zero info. _________________ KONG PB's: http://www.desipro.de/ddwrt/ KONG Info: http://tips.desipro.de/

arneande
DD-WRT User

Joined: 07 Nov 2008
Posts: 99

Posted: Sat Feb 27, 2016 23:53 Post subject:

<Kong> wrote:

I have two adapters running on a R7000, Huawei E1750 and E3372, you have to provide us with lots more info.
Right now you provide zero info.

root@DD-WRT:~# cat /sys/kernel/debug/usb/devices
cat: can't open '/sys/kernel/debug/usb/devices': No such file or directory?

root@DD-WRT:~# cat /proc/bus/usb/devices

T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=5000 MxCh= 1
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 3.00 Cls=09(hub ) Sub=00 Prot=03 MxPS= 9 #Cfgs= 1
P: Vendor=1d6b ProdID=0003 Rev= 4.04
S: Manufacturer=Linux 4.4.2 xhci-hcd
S: Product=xHCI Host Controller
S: SerialNumber=0000:00:0b.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms

T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 0
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 4.04
S: Manufacturer=Linux 4.4.2 xhci-hcd
S: Product=xHCI Host Controller
S: SerialNumber=0000:00:0b.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms

T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 2
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 4.04
S: Manufacturer=Linux 4.4.2 ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:00:0a.1
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms

T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=12d1 ProdID=1506 Rev= 1.02
S: Manufacturer=HUAWEI Technology
S: Product=HUAWEI Mobile
C:* #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=10 Driver=option
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=02 Prot=12 Driver=option
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=02 Prot=16 Driver=(none)
E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
I: If#= 2 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=16 Driver=(none)
E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
root@DD-WRT:~#

LOM
DD-WRT Guru

Joined: 28 Dec 2008
Posts: 7647

Posted: Sun Feb 28, 2016 3:55 Post subject:

Interface layout and usage for your dongle:

MI_00 ppp dialup modem
MI_01 user interface (at cmd)
MI_02 network adapter (huawei_cdc_ncm + cdc_ncm + cdc_wdm)
MI_03 USB Mass Storage Device
MI_04 USB Mass Storage Device

ppp dialup on interface #0 will likely fail, either because of a ddwrt bug affecting many dongles or because of not being supported in the dongles firmware even though there is an interface for it.
(There has been quite a few Huawei dongles/firmwares for high speed mobile internet (LTE CAT3 and better) where slow speed ppp dialup doesn't work)

There is no support in ddwrt for the direct network adapter interface and you would likely need a linux kernel 4.4 in order to use the Huawei ncm protocol.
_________________
Kernel panic: Aiee, killing interrupt handler!

<Kong>
DD-WRT Guru

Joined: 15 Dec 2010
Posts: 4339
Location: Germany

Posted: Sun Feb 28, 2016 7:03 Post subject: Re: Mobilbroadband

arneande wrote:

Hey

Mobilebroadband are not present for build after 13-11-15.
Am testing netgear,linksys,Asus.
And my conection to the world are 4gor3g

arneande Sad

Did it work with previous builds?
_________________
KONG PB's: http://www.desipro.de/ddwrt/
KONG Info: http://tips.desipro.de/

arneande
DD-WRT User

Joined: 07 Nov 2008
Posts: 99

Posted: Sun Feb 28, 2016 10:06 Post subject: Re: Mobilbroadband

<Kong> wrote:

arneande wrote:

Hey

Mobilebroadband are not present for build after 13-11-15.
Am testing netgear,linksys,Asus.
And my conection to the world are 4gor3g

arneande Sad

Did it work with previous builds?

Yes previus builds work before 13/11-15 both yours and other builds,but after that cant get it to work.
So its very strange because never had problem before.

ps Firmware: DD-WRT v3.0-r29165M kongac (02/28/16)... sorry no broadband

hackler756
DD-WRT User

Joined: 17 Sep 2014
Posts: 68
Location: Austria

Posted: Mon Feb 29, 2016 3:00 Post subject:
my Huawei E372 stopped working after BS build r28139 found a working version from kong: Firmware: DD-WRT v3.0-r28815M kongac (01/15/16) current builds are broken: Firmware: DD-WRT v3.0-r29165M kongac (02/28/16) Firmware: DD-WRT v3.0-r29147 std (02/23/16) see my test history http://svn.dd-wrt.com/ticket/4963

arneande
DD-WRT User

Joined: 07 Nov 2008
Posts: 99

Posted: Mon Feb 29, 2016 10:36 Post subject:
Thank you very much you save my day Hackler its not only me that got problem. will try kongs 28815M later Best whishes from old retired workingman arneande

arneande
DD-WRT User

Joined: 07 Nov 2008
Posts: 99

Posted: Mon Feb 29, 2016 15:16 Post subject:

hackler756 wrote:

my Huawei E372 stopped working after BS build r28139

found a working version from kong:
Firmware: DD-WRT v3.0-r28815M kongac (01/15/16)

current builds are broken:
Firmware: DD-WRT v3.0-r29165M kongac (02/28/16)
Firmware: DD-WRT v3.0-r29147 std (02/23/16)

see my test history
http://svn.dd-wrt.com/ticket/4963

where did you find that ,dont find it

hackler756
DD-WRT User

Joined: 17 Sep 2014
Posts: 68
Location: Austria

Posted: Mon Feb 29, 2016 15:28 Post subject:
the location would be here ... http://desipro.de/ddwrt/K3-AC-Arm/ but the working build is not online anymore. I'll upload it later today to my server and post the link here.

arneande
DD-WRT User

Joined: 07 Nov 2008
Posts: 99

Posted: Mon Feb 29, 2016 15:31 Post subject:
if this help? telnet on 13/1-16 no work no usb? root@DD-WRT:/tmp/var# cat /tmp/ppp/options.pppoe chap-secrets /tmp/ppp/chap-secrets pap-secrets /tmp/ppp/pap-secrets defaultroute usepeerdns noipdefault noauth ipcp-max-failure 30 crtscts 460800 connect "COMGTDIAL='ATD*99#' /usr/sbin/comgt DIAL -d /dev/usb/tts/0 >/tmp/comgt.out 2>&1" user 'admin' password '......' /dev/usb/tts/0

hackler756
DD-WRT User

Joined: 17 Sep 2014
Posts: 68
Location: Austria

Posted: Mon Feb 29, 2016 16:06 Post subject:
here we go http://bit.ly/1pkYBFp let me know if this build works for you too ...

arneande
DD-WRT User

Joined: 07 Nov 2008
Posts: 99

Posted: Mon Feb 29, 2016 16:27 Post subject:

hackler756 wrote:

here we go

http://bit.ly/1pkYBFp

let me know if this build works for you too ...

oops here som missunderstanding ,excuse me am got Asus rt68u
sorry sorry

Mybe am gone retired from this to

arneande Very Happy

hackler756
DD-WRT User

Joined: 17 Sep 2014
Posts: 68
Location: Austria

Posted: Tue Mar 01, 2016 7:25 Post subject:

Code:

DD-WRT v3.0-r28815M kongac (01/15/16)

root@R7000:~# cat /proc/bus/usb/devices

T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=5000 MxCh= 1
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 3.00 Cls=09(hub ) Sub=00 Prot=03 MxPS= 9 #Cfgs= 1
P: Vendor=1d6b ProdID=0003 Rev= 4.04
S: Manufacturer=Linux 4.4.0 xhci-hcd
S: Product=xHCI Host Controller
S: SerialNumber=0000:00:0c.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms

T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 0
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 4.04
S: Manufacturer=Linux 4.4.0 xhci-hcd
S: Product=xHCI Host Controller
S: SerialNumber=0000:00:0c.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms

T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 2
B: Alloc= 1/800 us ( 0%), #Int= 1, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 4.04
S: Manufacturer=Linux 4.4.0 ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:00:0b.1
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms

T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=12d1 ProdID=1506 Rev= 0.00
S: Manufacturer=Huawei Technologies
S: Product=HUAWEI Mobile
C:* #Ifs= 7 Cfg#= 1 Atr=c0 MxPwr=500mA
A: FirstIf#= 1 IfCount= 2 Cls=02(comm.) Sub=00 Prot=00
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=option
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 1 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=01 Prot=09 Driver=qmi_wwan
E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=08 Driver=qmi_wwan
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=03 Driver=option
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=02 Driver=option
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

root@R7000:~# comgt info -d /dev/ttyUSB2
stty: standard input: cannot perform all requested operations
##### Wireless WAN Modem Configuration #####
Product text:
====
Manufacturer: huaweiModel: E372Revision: 11.305.15.00.22SVN: 01IMEI: 353147049999999+GCAP: +CGSM,+DS,+ESOK
====
Manufacturer: uawei
IMEI and Serial Number: 53147049999999
Manufacturer's Revision: 11.305.15.00.
Hardware Revision: ^DSFLOWRPT:00000296,00000099,0000001A,0000000000097C19,000000000024B031,00107AC0,00501BD0
Network Locked: ^DSFLOWRPT:00000298,0000007A,0000005D,0000000000097D0D,000000000024B0EC,00107AC0,00501BD0
Customisation: ^DSFLOWRPT:0000029A
Band settings: (^DSFLOWRPT:0000029C,00000075,00000000,0000000000097E8B,000000000024B120,00107AC0,00501BD0)
APN: 1,"IP","drei.at","0.0.0.0",0,0
##### END #####

this is from the working build - when the next beta build is available, I'll post the data again

Manufacturer: uawei
not a copy/paste error Cool

Jack82
DD-WRT User

Joined: 26 Jan 2015
Posts: 229

Posted: Tue Mar 01, 2016 8:17 Post subject:

arneande wrote:

hackler756 wrote:

where did you find that, dont find it

I attached Kong's r28815 kongac (01/15/16) for AC68U. It is the first Kong build on 4.4 kernel, older ones were on kernel 3.10.
I have all of Kong's releases since r28500 if needed. I have sent them to user CloneVince and were kindly uploaded to his unofficial Kong repository http://ddwrt-kong.clonevince.fr/

A few notes for Kong's K3_AC_ARM builds:
r28800 and older : kernel 3.10
r28815 - r29020 : kernel 4.4
r29020v2 and newer : kernel 3.10

dd-wrt.v24-K3_AC_ARM_STD.bin

Description:

Download

Filename:

dd-wrt.v24-K3_AC_ARM_STD.bin

Filesize:

20.57 MB

Downloaded:

609 Time(s)

Last edited by Jack82 on Tue Mar 01, 2016 12:31; edited 1 time in total

Goto page 1, 2 Next

Display posts from previous:

Page 1 of 2

DD-WRT Forum Index -> Broadcom SoC based Hardware

All times are GMT

Navigation

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum

Log in

Mobilbroadband

Quick Links

Log in