Your reports for Broadcom units are greatly appreciated !
Router:
Firmware:
Kernel:
Status:
Reset:
Errors:
This build thread is for reporting successes and problem with loading this experimental test build. This is important info for developers and users. Always state your hardware and SPECIFIC build (e.g. 29519_NEWD-2_K2.6_mega-nv64k.bin). Do not ask questions about your specific router or how to configure it in this thread; create your own thread to discuss any specific problems you have or need resolved. Please also do not respond to such questions. This thread is to report info, not to seek it. Posts that do not add to understanding this build will be deleted. Make sure you know how to flash properly and the risk before using this build. It is important to adhere to these requirements, to keep this thread from becoming impossibly long and useless. If you don't know what build to flash and how to flash properly and have a means of recovery if things should go wrong, do NOT flash this experimental test build.
Posted: Mon Apr 25, 2016 14:53 Post subject: RTAC68U
Router: RTAC68U - BCM4708
Previous Firmware:v3.0-r29495
Firmware: v3.0-r29519 std
Kernel: linux 4.4.8 #669 SMP Sun Apr 24 06:48:35 CEST 2016 armv7l
Status: Working
Reset: NO
Errors: none so far!
Thanks for the maintainers of the firmware for the great work.
Router: TrendNet TEW-811DRU v1.0R
Firmware: DD-WRT v3.0-r29519 mini (04/25/16)
Kernel: Linux 4.4.8 #672 Mon Apr 25 06:06:27 CEST 2016 armv7l
Status: Working
Reset: No - Upgraded via Web GUI from DD-WRT v3.0-r29495 mini (04/21/16)
Errors: None yet
Router: Netgear R7000
Firmware: DD-WRT v3.0-r29519 std (04/25/16)
Kernel: Linux 4.4.8 #669 SMP Sun Apr 24 06:48:35 CEST 2016 armv7l
Status: Working
Reset: No
Previous: 29495
Errors: No
CPU Temperature : CPU 49.1 °C / WL0 43.3 °C / WL1 47.3 °C
Router: Linksys EA6400
Previous Firmware:v3.0-r29495
Firmware: v3.0-r29519 std
Kernel: linux 4.4.8 #669 SMP Sun Apr 24 06:48:35 CEST 2016 armv7l
Reset: NO
Status: Working
uptime: 18:29
CPU Temperature: CPU 82.5 °C / WL0 51.0 °C / WL1 54.0 °C
operating mode: AP
no problems overnight. 10-20 clients connecting on 2.4 and 5g.
thank you
Last edited by ghoffman on Tue Apr 26, 2016 9:51; edited 1 time in total
Router: Asus RT-AC5300
Firmware: DD-WRT v3.0-r29519 std (04/25/16)
Kernel: Linux 4.4.8 #674 SMP Mon Apr 25 06:14:11 CEST 2016 armv7l
Status: Working fine.
Reset: Yes
Errors: Yes
I'm having a problem with Wi-Fi 5 GHz, it's not working right, i'm like 2 feet far from the router but I barely catch like 2 bars of signal... Please fix this or teach me how to do it at least.
Router: Asus RT-AC68U
Firmware: DD-WRT v3.0-r29519 std (04/25/16)
Previous: DD-WRT v3.0-r29495 std (04/21/16)
Kernel: Linux 4.4.8 #669 SMP Sun Apr 24 06:48:35 CEST 2016 armv7l
Previous: Linux 4.4.8 #640 SMP Thu Apr 21 05:51:15 CEST 2016 armv7l
Status: ok
Reset: no
Errors:
1. Applications cannot configure port forwarding via the UPnP Service (it worked OK in r29440, but not r29495)
2. 5GHz panel light not lit
Operating Mode: Gateway
Uptime: 2:12
Temperature: CPU 73.0 °C / WL0 47.7 °C / WL1 50.3 °C
Uptime: 6:38
Temperature: CPU 74.7 °C / WL0 48.6 °C / WL1 51.1 °C
Uptime: 19:47
Temperature: CPU 69.1 °C / WL0 46.0 °C / WL1 49.0 °C
Addendum:
The upnp service does not run:
root@dd-wrt:/tmp/var/log# startservice upnp
root@dd-wrt:/tmp/var/log# ps|grep pnp
18442 root 1176 S grep pnp
root@dd-wrt:/tmp/var/log# cat messages|grep pnp
Apr 28 14:08:00 dd-wrt user.info : upnp : upnp daemon successfully started
root@dd-wrt:/tmp/var/log# find / -name *pnp*
/tmp/services/upnp.start
Update 17 May:
Issue resolved. Applications can configure port forwarding via the UPnP Service
Last edited by eywong on Sat May 21, 2016 14:30; edited 4 times in total
Router: Linksys E4200
Firmware: DD-WRT v3.0-r29495 & v3.0-r29519
Kernel: Linux 3.10.101 #12291 Mon Apr 11 10:04:41 CEST 2016 mips
Status: Working with problem
Reset: No
Errors: WAN not working
Joined: 10 Jan 2015 Posts: 270 Location: Minnesota
Posted: Tue Apr 26, 2016 9:58 Post subject:
Router: TM-AC1900 (RT-AC68U)
Firmware: DD-WRT v3.0-r29519 std (04/25/16)
Kernel: Linux 4.4.8 #669 SMP Sun Apr 24 06:48:35 CEST 2016 armv7l
Status: working (with errors)
Reset: Yes (GUI)
Errors: IPv6 does not work with QoS enabled (RADVD or DNSMasq) [see edit]
EDIT: Took 2 DAYS for the IPv6 prefix to be passed through my router.
I noticed I had a v6 address all of a sudden (from a firefox addon) just now.
Router: Netgear WNDR4000
Firmware: dd-wrt.v24-29519_NEWD-2_K3.x_mega-nv64k.bin
Previous: dd-wrt.v24-29495_NEWD-2_K3.x_mega-nv64k.bin
Kernel: 3.10.101 #12459
Status: Working.
Reset: No
Errors/issues: Not noticed any, yet. _________________
R6800 BS K4.4 r46329 (Main router)
WNDR3700v3 r40009 (WAP)
--- Spares ---
R7500 Stock FW (Found it at the city dump alongside a EX7000)
WNDR4300 BS K3.18 r40559 (Flaky ethernet ports)
R7000 BS K4.4 r40750 (Dead ethernet ports, cooked to death in the attic a really hot summers day, about 105-110C)
WNDR4000 BS K3.10 r31899 (Loaned out to tenant who lives in my old home)
WNR2000v2 BS K2.6 r39230 (bricks and giggles)
+ A bunch of WRT54GL:s
I use my routers with pretty basic configuration. Only having WiFi + BT coexist enabled.
I don't have any USB devices connected.
Joined: 13 Aug 2013 Posts: 6870 Location: Romerike, Norway
Posted: Tue Apr 26, 2016 16:09 Post subject:
Router: Asus RT-AC66U
Firmware: DD-WRT v3.0-r29519 giga (04/25/16)
Kernel: Linux 3.10.101 #12443 Mon Apr 25 09:37:11 CEST 2016 mips
Status: OK including IPV6
Reset: No
Errors: No
Router: Asus RT-AC68U (Broadcom BCM4708 2Core@800MHz)
Firmware: DD-WRT v3.0-r29519 std (04/25/16)
Kernel: Linux 4.4.8 #669 SMP Sun Apr 24 06:48:35 CEST 2016 armv7
Status: working with no issues
Reset: nvram erase && reboot before flash and reset to factory defaults in the WebGUI after flash
Errors: None after 24 hours
Observations: 5ghz/wl1 radio seems to have a higher tx error rate than normal\previously.
Temperatures:
CPU 79.1 °C / WL0 51.8 °C / WL1 52.3 °C
Memory:
Total Available 97% 255328 kB / 262144 kB
Free 83% 211224 kB / 255328 kB
Router: D-Link DIR-868L Rev A
Previous Firmware: 28647
Firmware: DD-WRT v3.0-r29519 std (04/25/16)
Kernel: Linux 4.4.8
Status: Working with problems
Reset: Yes
Errors: As with all builds with Linux 4.x.x, USB mount (ext4) is not working properly and consequently causes high CPU usage on my DIR-868L. The last fully working build is 28647. Can someone please report this to the bug tracker for me since it won't allow me to create an account?
