TP-LINK Archer C9 V2 DD-WRT

Post new topic   Reply to topic    DD-WRT Forum Index -> Оборудование на основе Atheros WiSOC
Author Message
vvgsfx
DD-WRT Novice


Joined: 21 Jun 2010
Posts: 39

PostPosted: Fri Jul 01, 2016 9:51    Post subject: TP-LINK Archer C9 V2 DD-WRT Reply with quote
Добрый день. Кто уже поставил dd-wrt на этот роутер - поделитесь впечатлениями: скорость wifi, стабильность, скорость с внешнего USB диска и т.д. Хочу поставить из-за необходимости запустить на роутере xupnpd (в родной прошивке даже телнета нет...). Пока боюсь ставить, так как не нашел прошивку для возврата на заводскую. Кто может подсказать, где взять?
Sponsor
vvgsfx
DD-WRT Novice


Joined: 21 Jun 2010
Posts: 39

PostPosted: Sat Jul 02, 2016 20:05    Post subject: Reply with quote
Не зря боялся... После прошивки последней версией для v2 dd-wrt 30016 (factory to dd-wrt), роутер ушел в бесконечную загрузку. Все светодиоды зажигаются на 4-5 сек., потом через 10 сек снова, и так по кругу. Через tftp съедает любую прошивку, но дальше снова загрузка по кругу. Пробовал через консоль - по непонятной причине команду tpl не воспринимает вообще, то есть остановить процесс загрузки не могу. Кабель DCU-5 рабочий - пробовал на 841nd. В форумах нашел обсуждение только v1, про v2 ничего не сказано. Как я понимаю, через tftp надо заливать не просто прошивку с сайта, а прошивку с вырезанным бутлодером. Кстати, где там JTAG – не нашел, нет его на плате… Что кто посоветует? Шить флешку на программаторе? Так где на него взять fullflash? Короче хотел как лучше, а получил кирпич за 10000р… Помогите!!!

Пишет в консоли:
nfo: DDR frequency set from clkfreq=1000,*800*
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.37.14.93 (r469350)
CPU type 0x0: 1000MHz
Tot mem: 131072 KBytes

CFE mem: 0x00F00000 - 0x02F80F3C (34082620)
Data: 0x00F48C1C - 0x00F490F0 (1236)
BSS: 0x00F49100 - 0x00F7EF3C (220732)
Heap: 0x00F7EF3C - 0x02F7EF3C (33554432)
Stack: 0x02F7EF3C - 0x02F80F3C (8192)
Text: 0x00F00000 - 0x00F3F36C (258924)

Device eth0: hwaddr EC-08-6B-84-0D-A4, ipaddr 192.168.0.1, mask 255.255.255.0
gateway not set, nameserver not set
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: ... 1630760 bytes read
Entry at 0x00008000
Closing network.
Starting program at 0x00008000
Uncompressing Linux... done, booting the kernel.
** 23 printk messages dropped ** Memory: 124200K/131072K available (3394K kernel code, 192K rwdata, 1200K rodata, 340K init, 468K bss, 6872K reserved, 0K cma-reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0x88800000 - 0xff800000 (1904 MB)
lowmem : 0x80000000 - 0x88000000 ( 128 MB)
pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
.text : 0x80008000 - 0x80484e1c (4596 kB)
.init : 0x80485000 - 0x804da000 ( 340 kB)
.data : 0x804da000 - 0x8050a030 ( 193 kB)
.bss : 0x8050d000 - 0x805821a4 ( 469 kB)
Hierarchical RCU implementation.
CONFIG_RCU_FANOUT set to non-default value of 2
Build-time adjustment of leaf fanout to 2.
NR_IRQS:256
MPCORE GIC init
soc_dmu_init
add clk lookups
MPCORE Global Timer Clock 500000000Hz on IRQ 27
sched_clock: 32 bits at 500MHz, resolution 2ns, wraps every 4294967295ns
clocksource: mpcore_gtimer: mask: 0xffffffffffffffff max_cycles: 0xe6a171a037, max_idle_ns: 881590485102 ns
register local timer
smp_twd: clock not found -2
Calibrating local timer... 499.72MHz.
Calibrating delay loop... 1987.37 BogoMIPS (lpj=9936896)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
2 cores has been found
Setting up static identity map for 0x85e0 - 0x8614
L2C: platform provided aux values permit register corruption.
L2C: DT/platform modifies aux control register: 0x0a130000 -> 0x7a530000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 16 ways, 256 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x4e530001
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Brought up 2 CPUs
SMP: Total of 2 processors activated (3981.31 BogoMIPS).
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
coherence_win_size = 10000000
coherence_flag = FFFFFFF8
ddr_phys_offset_va =FFFFFFFF
ddr_phys_offset2_va =A8000000
Found a ST compatible (Winbond/NexFlash) serial flash with 256 64KB blocks; total size 16MB
found cfe nvram on sflash
CCA UART Clock Config: Sel=1 Ovr=1 Div=48
CCA UART Clock rate 125000000Hz CCB UART Clock rate 125000000Hz
clocksource: Switched to clocksource mpcore_gtimer
NET: Registered protocol family 2
TCP established hash table entries: 1024 (order: 0, 4096 bytes)
TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
init gpio code
PCI: no core
PCI: no core
PCI: scanning bus 0
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0xffffffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:11.0: [Firmware Bug]: reg 0x10: invalid BAR (can't size)
PCI: Fixing up bus 0 domain 0
PCIE1 link=1
PCIE1 switching to GEN2
PCIE1 link=1
PCI host bridge to bus 0001:00
pci_bus 0001:00: root bus resource [mem 0x08000000-0x0fffffff]
pci_bus 0001:00: No busn resource found for root bus, will use [bus 00-ff]
PCI: Fixing up bus 0 domain 1
PCI: bus0: Fast back to back transfers disabled
pci 0001:01:00.0: Max Payload Size set to 512 (was 128, max 512)
PCI: Fixing up bus 1 domain 1
PCI: bus1: Fast back to back transfers disabled
pci 0001:00:00.0: BAR 8: assigned [mem 0x08000000-0x080fffff]
pci 0001:01:00.0: BAR 0: assigned [mem 0x08000000-0x08007fff 64bit]
pci 0001:00:00.0: PCI bridge to [bus 01]
pci 0001:00:00.0: bridge window [mem 0x08000000-0x080fffff]
PCIE2 link=1
PCIE2 switching to GEN2
PCIE2 link=1
PCI host bridge to bus 0002:00
pci_bus 0002:00: root bus resource [mem 0x40000000-0x47ffffff]
pci_bus 0002:00: No busn resource found for root bus, will use [bus 00-ff]
PCI: Fixing up bus 0 domain 2
PCI: bus0: Fast back to back transfers disabled
pci 0002:01:00.0: Max Payload Size set to 512 (was 128, max 512)
PCI: Fixing up bus 1 domain 2
PCI: bus1: Fast back to back transfers disabled
pci 0002:00:00.0: BAR 8: assigned [mem 0x40000000-0x400fffff]
pci 0002:01:00.0: BAR 0: assigned [mem 0x40000000-0x40007fff 64bit]
pci 0002:00:00.0: PCI bridge to [bus 01]
pci 0002:00:00.0: bridge window [mem 0x40000000-0x400fffff]
PCIE3 link=0
futex hash table entries: 512 (order: 3, 32768 bytes)
squashfs: version 3.0 (2006/03/15) Phillip Lougher
io scheduler noop registered (default)
io scheduler cfq registered
serial8250_init
Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
console [ttyS0] disabled
serial8250.0: ttyS0 at MMIO 0x18000300 (irq = 117, base_baud = 7812500) is a 16550
console [ttyS0] enabled
serial8250.0: ttyS1 at MMIO 0x18000400 (irq = 117, base_baud = 7812500) is a 16550
brd: module loaded
loop: module loaded
bcmsflash: squash filesystem found at block 36
Creating 6 MTD partitions on "bcmsflash":
0x000000000000-0x000000040000 : "boot"
0x000000040000-0x000000ff0000 : "linux"
0x000000240000-0x000000f00000 : "rootfs"
0x000000f00000-0x000000ff0000 : "ddwrt"
0x000000ff0000-0x000001000000 : "nvram_cfe"
0x000000fe0000-0x000000ff0000 : "nvram"
nflash: found no supported devices
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
GACT probability NOT on
Mirror/redirect action on
Simple TC action Loaded
netem: version 1.3
u32 classifier
Performance counters on
input device check on
Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (1940 buckets, 7760 max)
nf_conntrack_rtsp v0.7 loading
xt_time: kernel timezone is -0000
ip_set: protocol 6
gre: GRE over IPv4 demultiplexor driver
nf_nat_rtsp v0.7 loading
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 17
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Bridge firewalling registered
8021q: 802.1Q VLAN Support v1.8
Registering SWP/SWPB emulation handler
found cfe nvram
check if nvram copy is required CFE Size is 65536
nvram copy magic is 48534C46
max nvram space = 131072
read 65536 bytes to offset 0
Key type encrypted registered
Northstar brcmnand NAND Flash Controller driver, Version 0.1 (c) Broadcom Inc. 2012
brcmnand: found no supported devices
SQUASHFS error: Unknown inode type 15 in squashfs_iget!
VFS: Cannot open root device "1f02" or unknown-block(31,2): error -19
Please append a correct "root=" boot option; here are the available partitions:
0100 4096 ram0 (driver?)
0101 4096 ram1 (driver?)
0102 4096 ram2 (driver?)
0103 4096 ram3 (driver?)
0104 4096 ram4 (driver?)
0105 4096 ram5 (driver?)
0106 4096 ram6 (driver?)
0107 4096 ram7 (driver?)
0108 4096 ram8 (driver?)
0109 4096 ram9 (driver?)
010a 4096 ram10 (driver?)
010b 4096 ram11 (driver?)
010c 4096 ram12 (driver?)
010d 4096 ram13 (driver?)
010e 4096 ram14 (driver?)
010f 4096 ram15 (driver?)
1f00 256 mtdblock0 (driver?)
1f01 16064 mtdblock1 (driver?)
1f02 13056 mtdblock2 (driver?)
1f03 960 mtdblock3 (driver?)
1f04 64 mtdblock4 (driver?)
1f05 64 mtdblock5 (driver?)
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,2)
CPU0: stopping
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.4.13 #983
Hardware name: Northstar Prototype
Backtrace:
[<8001b128>] (dump_backtrace) from [<8001b2fc>] (show_stack+0x18/0x1c)
r7:804dbf20 r6:60000193 r5:804fa39c r4:00000000
[<8001b2e4>] (show_stack) from [<8015a168>] (dump_stack+0x94/0xa8)
[<8015a0d4>] (dump_stack) from [<8001ceb4>] (handle_IPI+0x110/0x1a8)
r7:804dbf20 r6:00000000 r5:00000000 r4:8050d16c
[<8001cda4>] (handle_IPI) from [<8000938c>] (gic_handle_irq+0x78/0x7c)
r7:b0100100 r6:804dbf20 r5:b010010c r4:804e9b18
[<80009314>] (gic_handle_irq) from [<80009e80>] (__irq_svc+0x40/0x54)
Exception stack(0x804dbf20 to 0x804dbf68)
bf20: 87ee0248 00000000 00000588 8000a9a0 804da000 804e98e0 8042193c 804d6224
bf40: 804dbf90 804ad8c8 00000000 804dbf7c 804dbf80 804dbf70 80018dd4 80018dd8
bf60: 60000013 ffffffff
r9:804ad8c8 r8:804dbf90 r7:804dbf54 r6:ffffffff r5:60000013 r4:80018dd8
[<80018d9c>] (arch_cpu_idle) from [<8006a4f0>] (default_idle_call+0x30/0x34)
[<8006a4c0>] (default_idle_call) from [<8006a5fc>] (cpu_startup_entry+0x108/0x13c)
[<8006a4f4>] (cpu_startup_entry) from [<80012a84>] (rest_init+0x80/0x84)
r7:8050d014 r4:00000000
[<80012a04>] (rest_init) from [<80485cbc>] (start_kernel+0x318/0x324)
[<804859a4>] (start_kernel) from [<0000807c>] (0x807c)
r9:413fc090 r8:0000406a r7:804efdd4 r6:804ad8c4 r5:804e9860 r4:8050d120
Rebooting in 10 seconds..
AlDemin
DD-WRT User


Joined: 20 Mar 2014
Posts: 139

PostPosted: Mon Jul 04, 2016 10:36    Post subject: Reply with quote
А что в консоль пишет, когда по tftp прошивку берет?
Fullflsh надо было до экспериментов сливать.
Что то на офф сайте прошивка только для v3
vasek00
DD-WRT Guru


Joined: 06 Nov 2010
Posts: 3312

PostPosted: Mon Jul 04, 2016 11:25    Post subject: Reply with quote
vvgsfx wrote:
В форумах нашел обсуждение только v1, про v2 ничего не сказано.

Для информации может
http://www.dd-wrt.com/phpBB2/viewtopic.php?p=994868
http://svn.dd-wrt.com/browser/src/router/tools/archerc9
и то что там лежит "archerc9v2_cfe.bin"

http://svn.dd-wrt.com/browser/src/router/tools/archerc9/mktplinkfw3.c
речь про разделы проверить
Code:


99   static const struct flash_partition_entry cpe510_partitions[] = {
100           {"fs-uboot", 0x00000, 0x40000},
101           {"os-image", 0x40000, 0x200000},
102           {"file-system", 0x240000, 0xc00000},
103           {"default-mac", 0xe40000, 0x000200},
104           {"pin", 0xe40200, 0x00200},
105           {"product-info", 0xe40400, 0x00200},
106           {"partition-table", 0xe50000, 0x010000},
107           {"soft-version", 0xe60000, 0x00200},
108           {"support-list", 0xe61000, 0x0f000},
109           {"profile", 0xe70000, 0x10000},
110           {"default-config", 0xe80000, 0x10000},
111           {"user-config", 0xe90000, 0x50000},
112           {"log", 0xee0000, 0x100000},
113           {"radio_bk", 0xfe0000, 0x10000},
114           {"radio", 0xff0000, 0x10000},
115           {NULL, 0, 0}
116   };
117   
118   /**
119      The support list for CPE210/220/510/520
120   
121      The stock images also contain strings for two more devices: BS510 and BS210.
122      At the moment, there exists no public information about these devices.
123   */
124   static const unsigned char archerc9_support_list[] =
125           "\x00\x00\x00\x4b\x00\x00\x00\x00"
126           "SupportList:\n"
127           "{product_name:ArcherC9,"
128           "product_ver:1.0.0,"
129           "special_id:00000000}\n"
130           "\x00";
131   
132   static const unsigned char archerc9v2_support_list[] =
133           "\x00\x00\x00\x4b\x00\x00\x00\x00"
134           "SupportList:\n"
135           "{product_name:ArcherC9,"
136           "product_ver:2.0.0,"
137           "special_id:00000000}\n"
138           "\x00";
...
526           if (strcmp(board, "ARCHERC9") == 0)
527                   do_cpe510(archerc9_support_list,sizeof(archerc9_support_list), "archerc9_cfe.bin", output, kernel_image, rootfs_image, add_jffs2_eof, sysupgrade);
528           else if (strcmp(board, "ARCHERC1900") == 0)
529                   do_cpe510(archerc1900_support_list,sizeof(archerc1900_support_list), "archerc9v2_cfe.bin", output, kernel_image, rootfs_image, add_jffs2_eof, sysupgrade);
530           else if (strcmp(board, "ARCHERC9v2") == 0)
531                   do_cpe510(archerc9v2_support_list,sizeof(archerc9v2_support_list), "archerc9v2_cfe.bin", output, kernel_image, rootfs_image, add_jffs2_eof, sysupgrade);
vvgsfx
DD-WRT Novice


Joined: 21 Jun 2010
Posts: 39

PostPosted: Mon Jul 04, 2016 14:46    Post subject: Reply with quote
AlDemin wrote:
А что в консоль пишет, когда по tftp прошивку берет?
Fullflsh надо было до экспериментов сливать.
Что то на офф сайте прошивка только для v3


Пишет "firmware check error" и по новой перегружается.
А для слива дампа разве можно не выпаивать флешку, а то у меня фена нет?

Короче сегодня отдал в сервис тп-линк - зальют дамп в флешку и дело с концом.
Но вопрос с установкой пакетов остался открытым. Как я понимаю, на стоковой прошивке это не осуществимо. Пока роутер еще был с родной прошивкой, заметил, что даже телнета нет... Как-то странно на таком серьезном железе, и такая прошивка...
vasek00
DD-WRT Guru


Joined: 06 Nov 2010
Posts: 3312

PostPosted: Mon Jul 04, 2016 18:41    Post subject: Reply with quote
Для сравнения в V1

Quote:
Router Model: TPLINK Archer C9 v1
Firmware Version: DD-WRT v3.0-r29134 std (02/19/16)
Kernel Version: Linux 4.4.2 #341 SMP Fri Feb 19 06:33:10 CET 2016 armv7l


...
74 squashfs: version 3.0 (2006/03/15) Phillip Lougher
75 io scheduler noop registered (default)
76 io scheduler cfq registered
77 Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
78 console [ttyS0] disabled
79 serial8250.0: ttyS0 at MMIO 0x18000300 (irq = 117, base_baud = 7812500) is a 16550
80 console [ttyS0] enabled
81 serial8250.0: ttyS1 at MMIO 0x18000400 (irq = 117, base_baud = 7812500) is a 16550
82 brd: module loaded
83 loop: module loaded
84 bcmsflash: squash filesystem found at block 28
85 Creating 6 MTD partitions on found bcmsflash28
86 0x000000000000-0x000000040000 : nd bcmboott;28
87 0x000000040000-0x000000ff0000 : nd bcmlinux;28
88 0x0000001c0000-0x000000d70000 : nd bcmrootfs28
89 0x000000d70000-0x000000ff0000 : nd bcmddwrt;28
90 0x000000ff0000-0x000001000000 : nd bcmnvram_cfe
91 0x000000fe0000-0x000000ff0000 : nd bcmnvram;cfe
92 nflash: found no supported devices
93 tun: Universal TUN/TAP device driver, 1.6
94 tun: (C) 1999-2004 Max Krasnyansky
...


https://wiki.openwrt.org/toh/tp-link/archer-c9
V1 родной Bootlogs
Quote:
CFE version 6.37.14.93 (r469350) based on BBP 1.0.37 for BCM947XX (32bit,SP,)
Build Date: Wed Nov 12 12:27:07 CST 2014 (root@localhost.localdomain)
Copyright (C) 2000-2008 Broadcom Corporation.
...
DDR Clock: 800 MHz
Info: DDR frequency set from clkfreq=1000,*800*
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.37.14.93 (r469350)
CPU type 0x0: 1000MHz
Tot mem: 131072 KBytes
...
bcmsflash: squash filesystem found at block 36 Creating 5 MTD partitions on "bcmsflash":
0x000000000000-0x000000040000 : "boot"
0x000000040000-0x000000240000 : "linux"
0x000000240000-0x000000ee0000 : "rootfs"
0x000000fe0000-0x000000ff0000 : "radio"
0x000000ff0000-0x000001000000 : "nvram"
nflash: found no supported devices
...


V1 OpenWrt bootlog
Quote:
...
[ 1.222669] 5 bcm47xxpart partitions found on MTD device spi32766.0
[ 1.230641] Creating 5 MTD partitions on "spi32766.0":
[ 1.237193] 0x000000000000-0x000000040000 : "boot"
[ 1.244463] 0x000000040000-0x000000ff0000 : "firmware"
[ 1.252116] 0x00000004001c-0x0000001a0000 : "linux"
[ 1.258334] mtd: partition "linux" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 1.275115] 0x0000001a0000-0x000000ff0000 : "ubi"
[ 1.282184] 0x000000ff0000-0x000001000000 : "nvram"
...


Для информации. Почитайте внимательно https://www.dd-wrt.com/phpBB2/viewtopic.php?t=283784&postdays=0&postorder=asc&start=210 15 и 16 страницу, почему не заглатывает прошивку. Не так уж и далеко ушел V1 от V2.
И особенно последнюю 16
Quote:

user1514
But if you still want v2, I don't have the file but I'll give you instructions:
Download ArcherC9RevertToStock.zip (from this post).

Open ddwrt-to-factory.bin with a hex editor and search for a string like:

Code:
vendor_name:TP-LINK.vendor_url:www.tp-link.com.product_name:ArcherC9.language:UN.product_ver:1.0.0.product_id:00090001.special_id:00000000

and change it to:
Code:
vendor_name:TP-LINK.vendor_url:www.tp-link.com.product_name:ArcherC9.language:UN.product_ver:2.0.0.product_id:00090002.special_id:00000000

and also change:
Code:
SupportList:.{product_name:ArcherC9,product_ver:1.0.0,special_id:00000000}

to:
Code:
SupportList:.{product_name:ArcherC9,product_ver:2.0.0,special_id:00000000}


I have no idea if this will break anything that I don't know about but it seemed to work.
vvgsfx
DD-WRT Novice


Joined: 21 Jun 2010
Posts: 39

PostPosted: Fri Jul 08, 2016 20:32    Post subject: Reply with quote
Перепробовал все возможное. Результата ноль. Через UART не могу ввести ни tpl, ни ctrl+с - не реагирует. Осталось последнее: залить на флешку дамп. Кто подскажет, где его взять? Может у кого есть?

Больше всего интересно, почему не реагирует на команду tpl и на ctrl+с в консоле?. Кабель нормальный точно. Если поврежден загрузчик, то не забирало бы прошивку по tftp, правильно я мыслю? Я уже попробовал все: и менял в прошивке, 000001 на 000002 (и еще там что-то), все равно при этом пишет "размер прошивки плохой" (bad firmware size). Если просто заливать стоковую прошивку с сайта тплинк, пишет firmware check error. Что блин ему еще сделать? У меня ощущение, что решение проблемы лежит на поверхности, но что-то я делаю не так...
vasek00
DD-WRT Guru


Joined: 06 Nov 2010
Posts: 3312

PostPosted: Wed Jul 13, 2016 7:42    Post subject: Reply with quote
vvgsfx
Наверное не внимательно читали
Quote:

Для информации может
http://www.dd-wrt.com/phpBB2/viewtopic.php?p=994868
http://svn.dd-wrt.com/browser/src/router/tools/archerc9
и то что там лежит "archerc9v2_cfe.bin"

речь идет о ...._cfe.bin
Чтоб не искать
Quote:
Just wondering about the Archer C1900, you mentioned that it is identical to the Archer C9 V2 but has small modifications in the radio data (which will broadcast with less power unless updated / changed).

1. Will the upcoming release of your C1900 image update the CFE bootloader to change the factory NVRAM to allow for broadcasting at full power?

Such as with factory-to-ddwrt.bin or tl-nnnnn-webflash.bin ?

or

2. Will we need to update the CFE bootloader separately with the archerc9v2_cfe.bin (from http://svn.dd-wrt.com/browser/src/router/tools/archerc9)?

Основную работу ведет загрузчик.
vvgsfx
DD-WRT Novice


Joined: 21 Jun 2010
Posts: 39

PostPosted: Fri Jul 15, 2016 19:46    Post subject: Reply with quote
Поправьте меня, если я не прав. Загрузчик, как я понимаю был поврежден при попытке прошить factory to dd-wrt. Поэтому, теперь при попытке залить по tftp прошивку для восстановления (с сайта tp-link, переименованную в archerc9v2_tp_recovery.bin) - выдает ошибку типа "ошибка, прошивка не от этой модели"... На любые другие прошивки (тоже переименованные), реакции так же нет. То есть, необходимо прошить сам загрузчик cfe.bin. Но каким образом, если через консоль не получается остановить загрузку, и увидеть командную строку? Нельзя же ведь через tftp прошить загрузчик??? Сейчас роутер лежит у человека с программатором и феном - ищем дамп... Может можно прошить этот загрузчик отдельно через программатор, а потом уже через tftp залить прошивку? Если да, то в какой диапазон адресов его шить?
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Оборудование на основе Atheros WiSOC All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum