I see you flashed an nv60k, are they interchangeable with the e2000 builds for your router? I've been using K3X builds for a while, always the e2000's.
Joined: 18 Mar 2014 Posts: 12923 Location: Netherlands
Posted: Sun Nov 05, 2017 8:27 Post subject:
nv60K are the right ones for E2000, but you can again use the K3.x build the size has been reduced.
K3.x builds are better although they were slower but with the recent addition of SFE, which is not available on K2.6 the WAN speed has increased tremendously.
I jumped on the 33492 bandwagon. I discovered that 30/30/30 reset nor web UI factory reset would clear out all the prior settings and erase nvram was necessary. No issues so far, other than a weird one when I accidentally disabled WiFi, and couldn't get to the Web UI from a wired connection after that. Had to hold the reset button until the LEDs flashed and then started over. I did not repeat this in order to confirm if this can be reproduced. _________________ --------------------------------------------------
VLANs, port trunking, virtual SSID (Guest)
DNSmasq, NTP, syslog, nflow
Hub and spoke, multi-site, routed VPN (OpenVPN client), split tunnel
1 DNS zone per site, forward, reverse look-up across all sites
Asus RT-AC68U rev A2 DD-WRT v3.0-r48138 std (01/17/22)
Asus RT-AC68U rev C1 DD-WRT v3.0-r48138 std (01/17/22)
Asus RT-AC1900P DD-WRT v3.0-r48138 std (01/17/22)
Asus RT-AC1900P DD-WRT v3.0-r48138 std (01/17/22)
Netgear R7000 DD-WRT v3.0-r48138 std (01/17/22)
Linksys E2000 DD-WRT v3.0-r33492 mega (10/10/17)
I've been using Tomato for the past few years on my WRT320N converted to E2000 but the need for fq_codel and/or cake made me look to alternatives.
I tested LEDE for the past few hours but the wifi drivers are missing, so the wifi lacks performance and stability.
I am now looking to come back to DD-WRT after like 8-9 years.
What is the recommended build?
Which one are you using currently? _________________ Linksys E2000 (Converted from WRT320N) - BS 19342 Big
TP-Link TL-WR941ND -
Asus WL-500W (dead)
2 x E2000
Firmware: DD-WRT v3.0-r36079 mega (06/01/1 - (previous r36006)
Kernel: Linux 3.10.108-d2 #19460 Fri Jun 1 13:23:21 CEST 2018 mips
2.4Ghz (NG-mixed) with 40Mhz channel width: Ok
SSH: Ok
Telnet: Disabled
Site Survey: Ok
Wi-viz Survey 2.4Ghz: Ok
Reset: Yes
Status: Ok
Uptime: 1 day, 9:47
CPU Temperature: WL0 54.2 °C
I'm on an E2000 and can't get any of the newer builds to stay up (uptime) for more than 12 hours. The best build I found is 33215 from 08/2017. It was the last build before the bricking started due to oversized images I believe.
Hey guys,
I have been testing me converted E2000 for 2 weeks or so now.
After making all things work I experience a major problem.
UNICAST is blocked somehow, so I don't have network discovery between my machines, can't cast youtube to the tv etc.
Do you have any idea how that can be fixed?
AP isolation mode off
WL in bridge
The second minor problem is that my syslog is flooded with this message
After making all things work I experience a major problem.
UNICAST is blocked somehow, so I don't have network discovery between my machines, can't cast youtube to the tv etc.
Do you have any idea how that can be fixed?
AP isolation mode off
WL in bridge
The second minor problem is that my syslog is flooded with this message[...]
Is there a build you tested that was working? There have been a lot of issues with this stuff lately; multicast/unicast, dlna, port forwarding, conntrack, etc. BS has been fixing a bunch of things the past few days; try the next build when it is out. _________________ #NAT/SFE/CTF: limited speed w/ DD#Repeater issues#DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo#
OPNsense x64 5050e ITX|DD: DIR-810L, 2*EA6900@1GHz, R6300v1, RT-N66U@663, WNDR4000@533, E1500@353,
WRT54G{Lv1.1,Sv6}@250|FreshTomato: F7D8302@532|OpenWRT: F9K1119v1, RT-ACRH13, R6220, WNDR3700v4
- (previous r36006)