OpenVPN - Server or Daemon??

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.)
Goto page Previous  1, 2, 3, 4
Author Message
Boogalooz
DD-WRT Novice


Joined: 13 Oct 2017
Posts: 38

PostPosted: Wed Nov 01, 2017 0:15    Post subject: Reply with quote
sarumans wrote:
hello @Boogalooz can you help me please??
I am trying everything from months but no way.

I have a wdr3600 router lan 192.168.0.1 and i am trying to connect with my android phone.

Can you post your settings on the router?(image if is possible)

which version of openvpn are you using?
I have windows 7 64bit. how do you generate the keys?


I followed the instructions in post #2 on page 1 of this thread.

I strongly suggest you do the same, it is the ONLY thing that worked for me.

The other things I STRONGLY suggest you do, is throw out everything you have done so far, clean all of your files out delete everything you have stored in any folder that relates to OPenVPN on your computer, and then re-install OpenVPN from scratch, and finally, do a MEDIUM reset on your router by holding the reset button down for 20 seconds, and then let it reboot, to set everything back to defaults in DD-WRT. Make sure you know what your basic settings for your router are before you do the MEDIUM reset, so you can put those back in place when you log in for the first time.

From there, you can actually start with a clean slate, follow the instructions precisely, and you should be able to make it work.

I cannot re-write everything in this thread, but I can tell you that everything you need to make it work is here.

That being said, I do NOT have the same router as you do. Mine is a Linksys WRT-1900AC(v2). But we are running the same firmware (r33555) so your setup should be the same as mine is, and everything I needed to know, was found here in this thread.

Just take your time, follow the steps outlined and you should be able to get it.

I used a Windows 7, 64bit computer to generate the keys.
Sponsor
sarumans
DD-WRT Novice


Joined: 01 Dec 2013
Posts: 18

PostPosted: Wed Nov 01, 2017 8:55    Post subject: Reply with quote
@Boogalooz ok just some question if is possible

1. but you use openvpn 2.2.2? or the last release?

client
dev tun
proto tcp <---use this or udp?
remote my.ip.myddns.org 11989 <--or 1194?

2. on the server you use tcp or udp?
i am testing my router ports but are all closed

3. my lan is 192.168.0.1
can you tell me the correct value for vpn?

4. can you write the correct settings on :

OpenVPN Server/Daemon on ddwrt:

OpenVPN:
Start Type:
Config as:
Server modeRouter:
Network:
Netmask:
Port:
Tunnel Protocol:
Encryption Cipher
Hash Algorithm
Advanced Options:
TLS Cipher:
LZO Compression:
Redirect default Gateway:
Allow Client to Client:
Tunnel MTU setting:

Tunnel UDP Fragment:

Tunnel UDP MSS-Fix:

thanks so so much.
Boogalooz
DD-WRT Novice


Joined: 13 Oct 2017
Posts: 38

PostPosted: Wed Nov 01, 2017 17:12    Post subject: Reply with quote
sarumans wrote:
@Boogalooz ok just some question if is possible

1. but you use openvpn 2.2.2? or the last release?


I am using OpenVPN 2.4.4-1601

Is your DD-WRT your main router, or is it behind the router your ISP provides?

I created a guide for dummies (not calling you a dummy) which outlines all of the steps I use. Try it out and let me know if it works out for you: http://www.dd-wrt.com/phpBB2/viewtopic.php?t=312064
Goto page Previous  1, 2, 3, 4 Display posts from previous:    Page 4 of 4
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.) All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum