New Build: 10-14-2019-r41321

Post new topic   Reply to topic    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.)
Author Message
PIZZEDMEOFF
DD-WRT User


Joined: 12 Dec 2017
Posts: 244
Location: FL

PostPosted: Mon Oct 14, 2019 13:19    Post subject: New Build: 10-14-2019-r41321 Reply with quote
Downloads: (if a link does not work, try another)
https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2019/10-14-2019-r41321/
ftp://ftp.dd-wrt.com/betas/2019/10-14-2019-r41321/
Alternate link: DD-WRT website
Note: for wget (or curl) with CLI flash (`write {f/w} linux`), change the https to http, use `curl -k {link} -o {file}`, or use ftp

Changelogs:
SVN* changelog https://svn.dd-wrt.com/timeline

Important: if reporting any issues, provide applicable info (GUI syslog, `dmesg`, `cat /var/log/messages`, etc.)
Or put into SVN ticket. For firewall issues, also provide "iptables" info (`iptables -L`, `iptables -t nat -L`, & the /tmp/.ipt file).


Template to copy (after "Code:") for posting issues, be sure to include the mode in use (gateway, AP, CB, etc.):
Code:
Router/Version:
File:
Kernel:
Mode:
Status:

WARNING: This thread is to report on flashing this experimental test build, providing important info for both developers and users. Always state your hardware model, version, mode (e.g. Repeater) and SPECIFIC build (e.g. ddwrt-linksys-wrt1900ac-webflash.bin). Please avoid discussions and create a new thread to discuss specific problems or questions, as this thread is for reporting, not support. Posts may be deleted or moved to keep this thread manageable and useful. If you don't understand the risks or what to flash and how, with a means of recovery if it bricks, do NOT flash this experimental test build.


Its working on my 1900ac V1

_________________
Downloads:
ftp site: ftp://ftp.dd-wrt.com/betas/2021
SVN Timeline:
https://svn.dd-wrt.com/timeline
Commands:
Misc: sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
samba: { sleep 30; stopservice samba3; startservice samba3; } &

WRT1900ACv1:

WIFI: 2.4ghz: NG-mixed, 20mhz channel width, channel follows AP, WPA2-CCMP-128.
WIFI: 5ghz: AC/N mixed, 40mhz channel width, channel 100+upper, WPA2-CCMP-128.
Misc Info: WPA2 Personal: "CCMP-128 (AES)" Static IP's VIA Mac+Host, SFE Enabled, No Rebind, Strict, no-resolv. NOTE: this is now just a wireless access point so to speak but all settings still apply to what ever wireless person connects.
Sponsor
dubs0587
DD-WRT Novice


Joined: 02 Oct 2019
Posts: 1

PostPosted: Mon Oct 14, 2019 13:53    Post subject: Reply with quote
Router/Version: WRT3200ACM
Kernel: 4.9.196 #1352
Mode: Gateway
Status: UP

SSH flash to partition 1 went well, flashed to 2nd partition via web WebGUI, also went well. Created backup config file.

All previous enabled settings/features performing as expected (DHCP w/ static leases, DNSmasq w/ DNSSEC, Unbound resolver, and oddly enough NTP is finally working with this build...it never seemed to want to grab a time from the NIST time servers but all seems good to ago. I'm not using VPN or QOS so that may still be something to watch out for.

Oh, and I'll mention that my JFFS2 attached drives all came back online without any intervention on my part. Also, throughput seems to be back to normal. No lag.

It seems that r41321 is stable for my WRT3200, hopefully it will be the same for yours, also.. Take it for what it's worth and try it out.
Monza
DD-WRT User


Joined: 01 Jul 2018
Posts: 438

PostPosted: Mon Oct 14, 2019 14:03    Post subject: Reply with quote
Upgraded WRT1200AC v1 from r41218 to r41321 using Waterfox 56.2.14 (64 bit) running on Linux Mint 19.1 OS.

Successful update and reboot. No reset, nothing disabled prior to update, uptime about 30 mins, wired/wireless connected, vpn up immediately. No drops wired/wireless or vpn. GUI seems stable now. I do NOT use QoS or NAS. Noticed OpenSSL Library now at ver 1.1.1d

Kernel Version Linux 4.9.196 #1352 SMP Mon Oct 14 03:43:33 CEST 2019 armv7l

Oct 14 09:37:03 router daemon.notice openvpn[1654]: OpenVPN 2.4.7 arm-unknown-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [MH/PKTINFO] [AEAD] built on Oct 14 2019
Oct 14 09:37:03 router daemon.notice openvpn[1654]: library versions: OpenSSL 1.1.1d 10 Sep 2019, LZO 2.09

Edit: Uptime now 4 hrs with no issues


Last edited by Monza on Mon Oct 14, 2019 17:43; edited 1 time in total
PIZZEDMEOFF
DD-WRT User


Joined: 12 Dec 2017
Posts: 244
Location: FL

PostPosted: Mon Oct 14, 2019 14:28    Post subject: Reply with quote
went and closed the ticket that was made for us.
_________________
Downloads:
ftp site: ftp://ftp.dd-wrt.com/betas/2021
SVN Timeline:
https://svn.dd-wrt.com/timeline
Commands:
Misc: sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
samba: { sleep 30; stopservice samba3; startservice samba3; } &

WRT1900ACv1:

WIFI: 2.4ghz: NG-mixed, 20mhz channel width, channel follows AP, WPA2-CCMP-128.
WIFI: 5ghz: AC/N mixed, 40mhz channel width, channel 100+upper, WPA2-CCMP-128.
Misc Info: WPA2 Personal: "CCMP-128 (AES)" Static IP's VIA Mac+Host, SFE Enabled, No Rebind, Strict, no-resolv. NOTE: this is now just a wireless access point so to speak but all settings still apply to what ever wireless person connects.
ellick
DD-WRT User


Joined: 28 Mar 2016
Posts: 265

PostPosted: Mon Oct 14, 2019 16:29    Post subject: Reply with quote
WRT1900acs v1
flash upgrade from r40009 on partition 2 to partition 1 worked fine.

I've had two bugs in all builds since r40009. Openvpn client won't turn on without hitting "Apply" twice and a loss of GUI access after a period of time. Obviously the second bug is much worse.

Before flashing, I disabled QoS. After the upgrade, tried turning on my openvpn client. It worked fine this time. I turned the vpn back off.

I then turned on QoS using Cake and again tried the openvpn client which I only use as needed. This time it failed to start without hitting apply twice. I then rebooted the router.

After the reboot, the openvpn client seems to be turning on normally with one click of Apply. Hopefully it stays that way but to me this indicates something is not refreshing properly without a reboot when QoS is turned on.

I'll use this build for a while and see if I have any problems with the GUI over time. Fingers crossed.
DaveI
DD-WRT User


Joined: 06 Jul 2009
Posts: 333

PostPosted: Mon Oct 14, 2019 19:01    Post subject: Reply with quote
SAMBA not auto starting on this one...You can disable and then re-enable it after reboot and it will work but not autostarting for me after reboot. This is the first build for me that this has happened.

On the other hand the DHCP server does run if you have the WiFi enbled...

_________________
WRT1900ACSv2
DaveI
DD-WRT User


Joined: 06 Jul 2009
Posts: 333

PostPosted: Mon Oct 14, 2019 19:20    Post subject: Reply with quote
This thing is B-A-D for me...
I keep losing internet connectivity with this build...

Flashed back to R41218 (As the last build inverted webpage color on the VPN tab)...

_________________
WRT1900ACSv2
so333
DD-WRT Novice


Joined: 05 Apr 2018
Posts: 13

PostPosted: Tue Oct 15, 2019 6:29    Post subject: Reply with quote
WRT1900ACSv2: Works great:
+ OpenVPN Server runs
+ Wireguard finally works again
+ WiFi stable
+ GUI and Internet stable
+ Samba works
gufus
DD-WRT Guru


Joined: 04 Aug 2012
Posts: 612
Location: behind the screen

PostPosted: Tue Oct 15, 2019 21:45    Post subject: Reply with quote
Anyone using WDS with this build?
_________________
WRT3200ACM openwrt 18.06.5
WRT3200ACM dd-wrt r41791
WRT54GL dd-wrt r21676
ellick
DD-WRT User


Joined: 28 Mar 2016
Posts: 265

PostPosted: Wed Oct 16, 2019 4:57    Post subject: Reply with quote
This is getting old. Not even two days and the GUI is dead.

May be time to go back to openwrt
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.) All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum