This build thread is for reporting successes and problem with loading this experimental test build. This is important info for developers and users. Always state your hardware and SPECIFIC build (e.g. 31722_NEWD-2_K2.6_mega-nv64k.bin). Do not ask questions about your specific router or how to configure it in this thread; create your own thread to discuss any specific problems you have or need resolved. Please also do not respond to such questions. This thread is to report info, not to seek it. Posts that do not add to understanding this build will be deleted. Make sure you know how to flash properly and the risk before using this build. It is important to adhere to these requirements, to keep this thread from becoming impossibly long and useless.
If you don't know what build to flash and how to flash properly and have a means of recovery if things should go wrong, do NOT flash this experimental test build. _________________ [I prefer answere in whole sentence]
Router: Linksys E3000 (formerly WRT610N V2)
Firmware: dd-wrt.v24-31722_NEWD-2_K3.x_mega-e3000.bin
Kernel: 3.10.105
Reset: no
Errors: no.
Note: use it as switch and AP.
Router: Linksys E4200 V1
Firmware: dd-wrt.v24-31722_NEWD-2_K3.x_mega-e3000.bin
Kernel: 3.10.105
Reset: no
Errors: no.
Note: use it as switch and AP. _________________ 2 times APU2 Opnsense 21.1 with Sensei
2 times RT-AC56U running DD-WRT 45493 (one as Gateway, the other as AP, both bridged with LAN cable)
3 times Asus RT-N16 shelved
E4200 V1 running freshtomato 2020.8 (bridged with LAN cable)
3 times Linksys WRT610N V2 converted to E3000 and 1 original E3000 running freshtomato 2020.8 (bridged with LAN cable)
Posted: Wed Mar 22, 2017 4:09 Post subject: Netgear R7000
Router: Netgear R7000
Firmware:r31722 (29 786 112 bytes)
Previous: r31571
Kernel: Linux 4.4.55 #1337 SMP Tue Mar 21 08:19:58
Temp/Load: CPU 65.8 °C / WL0 48.3 °C / WL1 49.7 °C / 0.00, 0.00, 0.00 (0%)
Reset: Nope, I like it dirty.
Errors/Issues: Not yet. (Uptime 47min)
Testing speeds on 100Mbit/s fiber (using local linux box):
Quote:
smask@AMDx4:~$ speedtest
Retrieving speedtest.net configuration...
Testing from [Redacted]
Retrieving speedtest.net server list...
Selecting best server based on ping...
Hosted by Tele2 (Gothenburg) [15.55 km]: 4.444 ms
Testing download speed................................................................................
Download: 121.46 Mbit/s
Testing upload speed....................................................................................................
Upload: 321.71 Mbit/s
_________________
R6800 BS K4.4 r46329 (Main router)
WNDR3700v3 r40009 (WAP)
--- Spares ---
R7500 Stock FW (Found it at the city dump alongside a EX7000)
WNDR4300 BS K3.18 r40559 (Flaky ethernet ports)
R7000 BS K4.4 r40750 (Dead ethernet ports, cooked to death in the attic a really hot summers day, about 105-110C)
WNDR4000 BS K3.10 r31899 (Loaned out to tenant who lives in my old home)
WNR2000v2 BS K2.6 r39230 (bricks and giggles)
+ A bunch of WRT54GL:s
I use my routers with pretty basic configuration. Only having WiFi + BT coexist enabled.
I don't have any USB devices connected.
Router: Netgear R8500
Firmware: DD-WRT v3.0-r31722 std (03/21/17)
Previous: r31690
Kernel: Linux 4.4.55 #1342 SMP Tue Mar 21 08:51:58 CET 2017 armv7l
Reset: No
Errors/Issues: Internet LED is not working while using WL0 radio in client mode to hotspot uplink. Inconsistent antenna LED control (usually on regardless of commanded state). No other issues detected. _________________ Asus RT-AC5300, Netgear R8500, Netgear R8000, Netgear R6100, Linksys E2500, Linksys E2000, Netgear R7000, Netgear WNDR4500, Netgear WNDR3800, Linksys WRT54Gv4, Linksys WRT54Gv1.1
Last edited by realbbb on Sat Mar 25, 2017 15:59; edited 1 time in total
Joined: 09 Nov 2014 Posts: 314 Location: Bakersfield, CA
Posted: Wed Mar 22, 2017 16:01 Post subject:
Router: 2x Linksys E3000
Firmware: dd-wrt.v24-31722_NEWD-2_K3.x_mega-e3000.bin
Previous: dd-wrt.v24-31690_NEWD-2_K3.x_mega-e3000.bin
Kernel: Linux 3.10.105 #14234 Tue Mar 21 12:39:38 CET 2017 mips
Reset: No
Errors/Issues: None thus far as client bridges.
Router: Trendnet TEW811DRU
Firmware: DD-WRT v3.0-r31722 mini (03/21/17)
Previous: DD-WRT v3.0-r31690 mini (03/17/17)
Kernel: Linux 4.4.55 #1340 Tue Mar 21 08:42:31 CET 2017 armv7l
Reset: No
Errors/Issues: None thus far as client bridge. _________________ Deployed Routers:
Netgear R7800 - 1x build 46979
- Gateway (USB /w Entware, CAKE QoS)
Netgear R7000 - 3x build 46979
Router: Netgear R6300v1
Firmware: dd-wrt.v24-31722_NEWD-2_K3.x_mega-R6300.chk
Kernel: 3.10.105
Status: GOOD
Reset: No
Errors: No.
Uptime: 9+ hours
Note: In use as AP, set up as default gateway, configured as DMZ-host behind crappy ISP supplied cable modem / router
Posted: Thu Mar 23, 2017 21:11 Post subject: Asus RT-AC88U
Router: Asus RT-AC88U
Firmware: asus_rt-ac88u-firmware.trx (r31722 std)
Previous: asus_rt-ac88u-firmware.trx (r31690 std)
Kernel: Linux 4.4.55-rc1 #1316 SMP Fri Mar 17 07:33:17 CET 2017 armv7l GNU/Linux
Reset: No
Errors/Issues: Flashing from GUI not possible, timeout on flash screen. While "flashing" suddenly high load with ebtables, task "write" with file from /tmp/xxxxx (zero bytes), after manual reboot back on r31690
E2500
DD-WRT v3.0-r31722 mega (03/21/17)
Linux 3.10.105 #14234 Tue Mar 21 12:39:38 CET 2017 mips
no reset
WAP + guest & radio schedule
all good
uptime 1 day, 19:14
Router Name: wzr1750dhp
Router Model: Buffalo WZR-1750DHP
Firmware: DD-WRT v3.0-r31722 (03/21/17)
Kernel: Linux 4.4.55 #1337 SMP Tue Mar 21 08:19:58 CET 2017 armv7l
Previous: v3.0-r30631 std (09/17/16)
Status: AP Working
Reset: GUI reset before Flash
Errors: Seems pretty stable.
Router Name: ea6400
Router Model: Asus RT-AC68U
Firmware: DD-WRT v3.0-r31722 std (03/21/17)
Kernel: Linux 4.4.21-rc1 #1393 SMP Wed Sep 14 07:07:04 CEST 2016 armv7l
Previous: v3.0-r30631 std (09/17/16)
Status: VPN AP NOT Working
Reset: GUI before flash (requires button reset if OpenVPN active)
Errors: LAN/WAN speed stable. Reports Asus RT-AC68U when OpenVPN client enabled.
2.4GHZ radio extremely weak on low channels (maybe hardware).
Can't start OpenVPN Client. Did get one connection with sequence of flash,
setup, run commands; however can't reproduce. AP functions seem stable.
Reverting to r-30631.
Router Name: e3000
Router Model: Linksys E3000
Firmware: DD-WRT v3.0-r31722 (03/21/17)
Kernel: Linux 3.10.105 #14234 Tue Mar 21 12:39:38 CET 2017 mips
Previous: v3.0-r30631 mega (09/17/16)
Status: Client Bridge Working
Reset: GUI Before and after Flash
Errors: None yet
Joined: 26 Mar 2013 Posts: 1858 Location: Hung Hom, Hong Kong
Posted: Sat Mar 25, 2017 6:09 Post subject:
Router Name: RT-N18U
Router Model: Asus RT-N18U
Firmware: DD-WRT v3.0-r31722 (03/21/17)
Kernel: Linux 4.4.55 #1337 SMP Tue Mar 21 08:19:58 CET 2017 armv7l
Previous: Asus firmware FW_RT_N18U_30043807266
Status: AP Working
Reset: yes
Errors: Working except...
1. LAN LED not working
updated:
2. DDNS function disabled. Clicking <Save> in that page would always reboot the router wihtout anything saved
3. WAN LED and USB LED not lit until USB was enabled. (maybe a mistaken observation)
update 31 Mar:
4. Some normal VLAN traffic was blocked by stock set of iptables rules. Didn't find out what's wrong. Problem didn't seem to happen in builds 31690 and 31791!
I have since fallen back to build 31277.
Last edited by mwchang on Fri Mar 31, 2017 14:57; edited 4 times in total
