[Catskan]

Hi,

I bricked my router TP-Link WR1043ND(V2.1), my router keep rebooting.
I tried the tftp server method with the tftpd32 software and specific IP. But when I connect my router (push reset before power on), logs server are empty and in the "tftp server" tab is empty too.

I tried with the server adresses : 127.0.0.1 and 192.168.0.66.

I tried different versions of tftpd32 and with the compatibility mode and it's same.

My router keep rebooting and tftpd detect nothing.

Have you already had this problem ?

Thanks you in advance for your help

[reddytej]

Have you renamed your .bin file? I have a TPLink TL-WR841N and had to rename my .bin file to wr841nv11_tp_recovery.bin for it to work in tftpd32.

[Catskan]

Yes, I renamed my bin file to wr1043ndv4_tp_recovery.bin and doesn't work. Tftpd32 doesn't detect my router

[reddytej]

How long do you hold the reset button?

and

Are you able to ssh into your router?

[Catskan]

I push the reset button between 10 and 30sec.

I can't access with ssh because my rooter reboot continuously. Led flashing, stop, flashing, stop, ...