Your reports for Broadcom units are highly appreciated !
Router:
Firmware:
Kernel:
Status:
Reset:
Errors:
This build thread is for reporting successes and problem with loading this experimental test build. This is important info for developers and users. Always state your hardware and SPECIFIC build (e.g. 29621_NEWD-2_K2.6_mega-nv64k.bin). Do not ask questions about your specific router or how to configure it in this thread; create your own thread to discuss any specific problems you have or need resolved. Please also do not respond to such questions. This thread is to report info, not to seek it. Posts that do not add to understanding this build will be deleted. Make sure you know how to flash properly and the risk before using this build. It is important to adhere to these requirements, to keep this thread from becoming impossibly long and useless. If you don't know what build to flash and how to flash properly and have a means of recovery if things should go wrong, do NOT flash this experimental test build.
Last edited by Handyone on Tue Jul 18, 2017 17:21; edited 1 time in total
Posted: Tue Jul 18, 2017 13:35 Post subject: Re: New build: DD-WRT v3.0 --- 32737 --- 2017/07/18
Your reports for Broadcom units are highly appreciated !
Router: E4200
Firmware:32737
Kernel:3.10
Status:in same way running
Reset:No
Errors:
WEB GUI is a total mess...
not usable at all.
back to 31270
Last edited by dreammaster1975 on Tue Jul 18, 2017 20:28; edited 1 time in total
I installed on WRT54Gv2.2 ( 4/16 RAM) but never could access the webif
I strongly discourage installing r32737 on any Linksys WRT54G/GL/GS.
But if you need these files to help recover just go at it..
They're on a straight up http server so wget works just fine... on mini or greater firmware
Joined: 18 Jul 2017 Posts: 45 Location: Wisconsin, USA
Posted: Tue Jul 18, 2017 16:11 Post subject:
Router: Linksys 6500v1
Firmware:r32737
Kernel:3.10
Reset: No
Error: Broken GUI
Can confirm like above post GUI interface is completely broken and unusable, SSH and Telnet are working correctly, router appears to be working correctly, all wireless clients connect with good signal, on desktop clients static ip lease and port range forwarding all check out.
Downgrading back to r32597 via telnet until GUI issues are worked out as build is stable but GUI is intermittent.
Posted: Tue Jul 18, 2017 20:29 Post subject: WebGUI broken x64 pc version
Router: Generic x64 pc
Firmware: r32737
Kernel: Whatever it was supplied with r32737
Status: Shite
Reset: Yes
Errors: Yes Webgui
I had the same WebGUI bug as everyone else but using the PC x64bit version. I had to rip out my hard drive and reinstall the r32597 manually with phsydiskwrite.
Thank god the nvram did not get overwritten. Thank god I did not go Gung-ho on installing this build on my wifi routers. That would have been a mess.
I installed on WRT54Gv2.2 ( 4/16 RAM) but never could access the webif
I strongly discourage installing r32737 on any Linksys WRT54G/GL/GS.
But if you need these files to help recover just go at it..
They're on a straight up http server so wget works just fine... on mini or greater firmware
hello,
i used your links and telnet did access the firmware but it did not install as i am sure i did/didn't do something. Can you say where i went wrong from the screen shot?
Posted: Wed Jul 19, 2017 2:13 Post subject: Use TFTP2 to push older version back into the unit
Terrance73 wrote:
Wow...I cannot even get this build off the access point. I've putty in and deleted the NVRAM, and also done the 30/30/30; and she is still there.
Any ideas on how to buts this open, let me (us) know. Thanks.
You need to use the http://www.shadowsoftware.net/shadowgameworld/downloads/tftp2.exe program and push in a previous build. Pretty much download the r32597 build. Assign your own IP address use your user name and login info and push the previous build into the unit. Wait for it to reboot and you will have a working GUI again.
This is why the build is no longer available they removed it due to this huge bug.