[0axx]

Hello,

I understand that forum isn't about Tomato, but my problem is rather with wrt54g hardware... Hope someone helps me.

I have old wrt54g with Tomato which probably is in wifi client mode, with disabled DHCP server and client. I don't know the IP adress range and I can't access it in any way.
I am affraid that router have lost own IP address and will not acquire new one.

But - the only one thing which I need - as many config files as possible. That is my oldest router and I would need to recover MAC adresses saved on 'static' leases list.

So, I thought that that would be possible to connect via JTAG - console and apply any IP adress to the router through the CLI or, maybe find the config files on the device, and next, cat it in console, or scp / ftp to any other device.

But I am not sure - is that be possible through JTAG ? would be possible to get 'normal' ssh CLI ?

regards

[tedm]

I think what you want is a serial console

http://www.rwhitby.net/projects/wrt54gs

Get that working then you can just login and be at a Unix command prompt.

[0axx]