Joined: 03 Jan 2017 Posts: 49 Location: Lindau, Germany
Posted: Fri Jan 05, 2018 8:44 Post subject: R6300v2
Router: Netgear R6300v2
Firmware: DD-WRT v3.0-r34320M kongac (01/03/1
Kernel: Linux 4.4.109-rc1 #482 SMP Wed Jan 3 15:42:11 CET 2018 armv7l
Status: Up and running for 1 day
Reset: No, just ddup --flash-latest from 34015 and reboot
Errors: None so far
Router mode with DNSMasq and DHCP
SFE enabled for test (not really required for 50 mbit/s)
DNScrypt with several servers, DNSSEC enabled
SPI Firewall with custom settings
USB with HDD and printer, NAS, Samba, miniDLNA
wl0, wl1 and guest wlan with second dnsmasq instance and hotspot (chillispot)
VPN and SSH server
Entware with pixelserv and other nice stuff
custom cron script (logging and dyndns)
Everything running fine so far. Thanks for the great work!
Router: Netgear R6300V2
Firmware: DD-WRT v3.0-r34320M kongac (01/03/1
Kernel: Linux 4.4.109-rc1 #482 SMP Wed Jan 3 15:42:11 CET 2018 armv7l
Status: Up < 1hr updated from r33770m
Reset: No
Errors: none so far
Joined: 09 Nov 2014 Posts: 314 Location: Bakersfield, CA
Posted: Fri Jan 05, 2018 21:21 Post subject:
Router: 2x Netgear R7000
Firmware: DD-WRT v3.0-r34320M kongac (01/03/1 Previous: DD-WRT v3.0-r34015M kongac (12/09/17)
Kernel: Linux 4.4.109-rc1 #482 SMP Wed Jan 3 15:42:11 CET 2018 armv7l
Status: Working great so far, will report errors if they come up.
Reset: No, flashed via ddup --flash-latest
Errors: None noticed so far.
The Gateway is running OpenVPN server, USB, SFE, QoS, dnsmasq as DHCP server, overclocked to 1400, and all is working well.
The second is a AC-only AP for my servers, also overclocked to 1400 with SFE enabled working great. Pretty much no features enabled on this one though, fast page loads for my sites though.
So far, this seems like a quality build. If any problems arise, I'll be sure to report them here. Thanks, devs!
EDIT: Well, after testing things out, I tried streaming Pandora from my iPhone 6S+ and it just stayed constant loading/buffering and didn't play anything. I downgraded back to 34015 and the problem went away. So I think I'mma stick to 34015 for now. _________________ Deployed Routers:
Netgear R7800 - 1x build 46979
- Gateway (USB /w Entware, CAKE QoS)
Netgear R7000 - 3x build 46979
Router: Netgear R7000
Firmware: v3.0-r34320M kongac (01/03/18)
Kernel: Linux 4.4.109-rc1 #482 SMP Wed Jan 3 15:42:11 CET 2018 armv7l
Status: Up and running for 2 days
Reset: Soft boot before and after ddup
Errors: None
Upgraded via 'ddup --flash-latest' from 34015. No 'erase nvram' this time.
I'm seeing more "authentication fail" messages in the syslog, but I'm not sure where they originate. I have a few more wireless devices connecting to the R7000 now, so one or more of them may be guilty.
The temperatures are good: CPU 58.0 °C / WL0 48.0 °C / WL1 49.0 °C (The R7000 is wall-mounted.)
Current basic R7000 setup (subject to change of course):
- SFE - On
- Static WAN IP
- LAN DHCP Enabled
- IPv4 only
- 1 wireless VLAN on wl0
- Encrypt DNS disabled
- Wireless: Regulatory Domain = UNITED_STATES, wl0 NG-Mixed (ch. 7 + 5), wl1 NA-Mixed (ch. 161 + 159), AES
- SNMP enabled, SSH enabled, Telnet disabled
- Firewall enabled, Log Level high
- Syslog: remote to Logentries. klogd: disabled.
- USB Flashdrive mounted as JFFS, adblocking via pixelserv
- NO: ttraf, VNC, Zabbix, VPN, Radius, OpenVPN
- NO: Port forwarding, UPnP, DMZ, QoS
- NO: Samba, CIFS, JFFS2, miniDLNA, Entware, Optware _________________ Netgear R7000: v3.0-r54248 std (11/29/23)
EdgeRouter-X: EdgeOS v2.0.9-hotfix 7
Posted: Sun Jan 07, 2018 2:02 Post subject: Asus RT-AC68U A1
Router: Asus RT-AC68U (H/W Ver: A1)
Firmware: DD-WRT v3.0-r34320M kongac (01/03/18)
Previous: DD-WRT v3.0-r34015M kongac (12/09/17)
Kernel: Linux 4.4.109-rc1 #482 SMP Wed Jan 3 15:42:11 CET 2018 armv7l
Previous: Linux 4.4.104 #480 SMP Sat Dec 9 00:51:32 CET 2017 armv7l
Status: ok
Reset: no (ddup --flash-latest)
Errors: no
Uptime: 1 day, 5:38
Posted: Mon Jan 08, 2018 10:08 Post subject: NTP Client problem
My AC68U is losing track of time with this build, i was using empty ntp server without any problems in 34015.
Tried filling with some server ip, but the problem remains.
Back to 34015.
Joined: 03 Jan 2017 Posts: 49 Location: Lindau, Germany
Posted: Mon Jan 08, 2018 19:05 Post subject: Re: R6300v2
r6300v2usr wrote:
Router: Netgear R6300v2
Firmware: DD-WRT v3.0-r34320M kongac (01/03/1
Kernel: Linux 4.4.109-rc1 #482 SMP Wed Jan 3 15:42:11 CET 2018 armv7l
Status: Up and running for 1 day
Reset: No, just ddup --flash-latest from 34015 and reboot
Errors: None so far
Router mode with DNSMasq and DHCP
SFE enabled for test (not really required for 50 mbit/s)
DNScrypt with several servers, DNSSEC enabled
SPI Firewall with custom settings
USB with HDD and printer, NAS, Samba, miniDLNA
wl0, wl1 and guest wlan with second dnsmasq instance and hotspot (chillispot)
VPN and SSH server
Entware with pixelserv and other nice stuff
custom cron script (logging and dyndns)
Everything running fine so far. Thanks for the great work!
Observed yesterday an issue with my Netgear WNCE4004 (wireless client bridge):
The wnce4004 can not connect to my R6300V2 anymore (via wifi, tested both on w0/2.4G and wl1/5G).
It seems there is an issue with the dhcp on the R6300V2, the wnce4004 seems to be connected and immediately after the connect the connection is interrupted and it starts all over again.
Today flashed the R6300v2 back to 34015 (without reset) and the wnce4004 is connecting again.
But as I checked the log (34015 on wl1) it seems that the wnce4004 is not the most stable unit (seldom dhcp reconnects on 34015 with wl1).
As far as I remember wnce4004 dhcp reconnects occurred in the past as well, from time to time, not dramatic.
Not made up my mind yet how to proceed, keep the R6300v2 on 34015 or maybe it is time to exchange the old wnce4004.
.....
EDIT: Well, after testing things out, I tried streaming Pandora from my iPhone 6S+ and it just stayed constant loading/buffering and didn't play anything. I downgraded back to 34015 and the problem went away. So I think I'mma stick to 34015 for now.
Could you help met getting the 34015 image for my R7000?
After endless issues with BS builds i want to try Kong's image and since you tested a few things already i would like to start with image 34015 first
Joined: 03 Jan 2017 Posts: 49 Location: Lindau, Germany
Posted: Mon Jan 08, 2018 20:07 Post subject:
bl@d3runn3r wrote:
SinCalChewy wrote:
.....
EDIT: Well, after testing things out, I tried streaming Pandora from my iPhone 6S+ and it just stayed constant loading/buffering and didn't play anything. I downgraded back to 34015 and the problem went away. So I think I'mma stick to 34015 for now.
Could you help met getting the 34015 image for my R7000?
After endless issues with BS builds i want to try Kong's image and since you tested a few things already i would like to start with image 34015 first
Could you help met getting the 34015 image for my R7000?
After endless issues with BS builds i want to try Kong's image and since you tested a few things already i would like to start with image 34015 first
Thanks in advance.
Use dd-wrt.K3_R7000.chk if you're on stock firmware, or dd-wrt.v24-K3_AC_ARM_STD.bin if you're already on DD-WRT. I'd recommend reading http://ddwrt-kong.clonevince.fr/Supported%20Models just to make sure you're doing it right.
34015 is a really good build. I had 20+ days uptime on my gateway with QoS, OpenVPN Server, SFE, dnsmasq for DHCP, USB and overclocked to 1400 with no problems or cutouts. Best of luck. _________________ Deployed Routers:
Netgear R7800 - 1x build 46979
- Gateway (USB /w Entware, CAKE QoS)
Netgear R7000 - 3x build 46979
Posted: Wed Jan 10, 2018 18:36 Post subject: Airplay over Openvpn tun
Hi,
I am trying to airplay from ipad to appletv over openvpn tun
Here is what I am trying to achive
ipad->airplay -> openvpn -> appletv
appletv and openvpn tun are in separate network (routed)
Started mdns-repeater to send the multicast mdns packet to both netorks(openvpn - tun2 and appletv -br0). mdns-repeater successfully repeats the multicast packets from br0 to tun2. But I can not see any multicast packets from the openvpn tun2 interface(from openvpn client i.e ipad).
