I am confused Port Forwarding is working for me... I have not added a new rule for a while. I have used all of those versions (except 34760). So that is strange to me.
It is only broken for certain wan types. But BS just rolled back his firewall changes shortly before I was going to commit the proper fixes.
Router Name TP-WA901ND
Router-Modell TP-Link TL-WA901ND v3
Firmware-Version DD-WRT v3.0-r34777 std (01/31/18)
Kernel Version Linux 3.18.93-rc1 #6963 Wed Jan 31 05:27:29 CET 2018 mips
Updated via web interface, no reset.
So far, everything seems to run as usual.
LEDs are still green, WLAN speed seems to be OK on 2.4 GHz, 5 GHz is not available.
I am confused Port Forwarding is working for me... I have not added a new rule for a while. I have used all of those versions (except 34760). So that is strange to me.
It is only broken for certain wan types. But BS just rolled back his firewall changes shortly before I was going to commit the proper fixes.
Man this sucks.
Thank you for the explanation Kong!! I appreciate it
I am confused Port Forwarding is working for me... I have not added a new rule for a while. I have used all of those versions (except 34760). So that is strange to me.
It is only broken for certain wan types. But BS just rolled back his firewall changes shortly before I was going to commit the proper fixes.
Man this sucks.
Thank you for the explanation Kong!! I appreciate it
I have an error while switching the mode, from AP to client or from client to AP
the DHCP does not work and the web interface does not load, i have to restart the router manually
Posted: Mon Feb 05, 2018 11:38 Post subject: TL-WR1043v1
Router Model: TL-WR1043v1
Status: Upgrade failed!
Reset: No.
Errors: One, but huge - can't upgrade at all.
I can't do webupgrade since build 33986. Everything goes fine, until a few seconds after clicking Upgrade button I get Upgrade Successful message, but I still have build 33986.
Posted: Mon Feb 05, 2018 12:14 Post subject: Re: TL-WR1043v1
tzok wrote:
Router Model: TL-WR1043v1
Status: Upgrade failed!
Reset: No.
Errors: One, but huge - can't upgrade at all.
I can't do webupgrade since build 33986. Everything goes fine, until a few seconds after clicking Upgrade button I get Upgrade Successful message, but I still have build 33986.
Posted: Mon Feb 05, 2018 19:13 Post subject: Re: TL-WR1043v1
DAC324 wrote:
tzok wrote:
Router Model: TL-WR1043v1
Status: Upgrade failed!
Reset: No.
Errors: One, but huge - can't upgrade at all.
I can't do webupgrade since build 33986. Everything goes fine, until a few seconds after clicking Upgrade button I get Upgrade Successful message, but I still have build 33986.
Yes, it is the same issue. Each build for WR1043ND v1 since 33375 has it. That device cannot be upgraded via web interface. I always take a detour through the stock firmware with the TFTP method for getting a newer build on my device since then.
Posted: Tue Feb 06, 2018 6:03 Post subject: Re: TL-WR1043v1
Quote:
Yes, it is the same issue. Each build for WR1043ND v1 since 33375 has it. That device cannot be upgraded via web interface. I always take a detour through the stock firmware with the TFTP method for getting a newer build on my device since then.
The same thing happens with the TP-Link model TL-WR941ND v3.6.
Joined: 12 May 2012 Posts: 66 Location: Rio Grande do Sul / Brasil
Posted: Tue Feb 06, 2018 11:49 Post subject: Re: TL-WR1043v1
pepe10000 wrote:
Quote:
Yes, it is the same issue. Each build for WR1043ND v1 since 33375 has it. That device cannot be upgraded via web interface. I always take a detour through the stock firmware with the TFTP method for getting a newer build on my device since then.
The same thing happens with the TP-Link model TL-WR941ND v3.6.
Here is the bootlog, it may be helpful as there are some warnings (this is a first boot, after updating from the latest stock firmware):
Code:
U-Boot 1.1.4 (Mar 19 2014 - 11:06:29)
AP83 (ar9100) U-boot 0.0.11
DRAM:
sri
32 MB
id read 0x100000ff
flash size 8MB, sector count = 128
Flash: 8 MB
Using default environment
In: serial
Out: serial
Err: serial
Net: ag7100_enet_initialize...
No valid address in Flash. Using fixed address
: cfg1 0xf cfg2 0x7114
eth0: 00:03:7f:09:0b:ad
eth0 up
eth0
is_auto_upload_firmware=0
Autobooting in 1 seconds## Booting image at bf020000 ...
Uncompressing Kernel Image ... OK
Router Model TPLINK WR1043ND V3
Firmware Version DD-WRT v3.0-r34777 std (01/31/1
Kernel Version Linux 3.18.93-rc1 #6973 Wed Jan 31 05:38:51 CET 2018 mips
update: via GUI
status: operational
reset: No
errors: Running good for 1h no bad tests.
Router Model TP-Link TL-WR841ND v8
Firmware Version DD-WRT v3.0-r34777 std (01/31/1
Kernel Version Linux 3.18.93-rc1 #6961 Wed Jan 31 05:26:08 CET 2018 mips
update: via GUI
status: operational
reset: No
errors: Running good for 1h no bad tests.
