JFYI/Point-of-Reference -- I installed r34777-2018.01.31 on my WRT1900ACS v1 as a flash upgrade, keeping existing config. Will post if I have any big issues.
______________________________
Linksys WRT1900ACS v1 - r34777
FIRMWARE:OpenWrt SNAPSHOT r8217-2cc821e / LuCI Master (git-18.276.41146-280dd33) MODEM:ARRIS SURFBoard SB8200 ROUTER:Linksys WRT32X USB NAS:Western Digital BLACK 1 TB Hardrive + Startech USB 3.0 External SATA III Enclosure
DLNA Server not working with my IP Radio...
It used to work but haven't used/checked in a long time...
EDIT: Problem was corrected by reflashing back to
Build 34578 (DLNA wasn't working in 34760 either).
Joined: 11 Feb 2016 Posts: 198 Location: South London
Posted: Fri Feb 02, 2018 12:11 Post subject:
DaveI wrote:
DLNA Server not working with my IP Radio...
It used to work but haven't used/checked in a long time...
EDIT: Problem was corrected by reflashing back to
Build 34578 (DLNA wasn't working in 34760 either).
Same here DLNA not working, Samba is fine and showing up on network _________________ | Netgear Nighthawk X4S R7800 | Linksys WRT1900ACS V1 | Huawei Echolife HG612 3B |
after reading all the recent feedback from this recent build as well the previous build, i've decided to skip r34760 and r34777 for now and stick with build 34578.
so far the issue with NTP had already been fixed and working on my end with build 34578, so i see no reason for now to update to this newer builds. _________________ Router: Linksys WRT1200AC v2
Firmware: DD-WRT v3.0-r44048 std [08/02/20]
I am running r34578 successfully on my Linksys WRT1900ACS V2. It's a little difficult to tell from the posts on r34760 and r34777 of whether I should upgrade or not. My setup is fairly straightforward including several TV streaming boxes, music streaming, a couple computers and various smart-home gadgets and the only service I use is an OpenVPN client. Would anyone care to comment if upgrading to r34777 would be unwise?
I think if you found something that works on the WRT routers, don't freaking change it until you absolutely HAVE to. _________________ My "WRT" rant, and why I have gone ddwrt on x86, no more consumer routers. ( ac86u as access points & bridges )
The last Linksys firmware update for my router was in JULY of last year...6 1/2 months later still no update to fix all the vulnerabilities that surfaced since then. I believe they are screwed up from the Belkin takeover and most likely will remain that way. If support from Linksys (and I'm not talking the open-source driver) is not improved this will be my last Linksys as well..I wouldn't even be using it now if it weren't for DD-WRT...
-- I installed r34777-2018.01.31 on my WRT1900ACS v1 as a flash upgrade, keeping existing config. Will post if I have any big issues.
