Ninjaef,
First off, you'll want to state which model of router you have. There's quite a few now in the Linksys Marvell lineup.
Secondly, no one is going to have a config file to just drop in and work - everyone's is specific to their own needs and network setup. You might be better off asking, for example, what channel & values to you use on the 5Ghz radio for best performance? Something more specific might get you what you are looking for.
Joined: 18 Aug 2009 Posts: 597 Location: Antigua/Seattle
Posted: Fri Feb 09, 2018 16:21 Post subject:
zakaron wrote:
Ninjaef,
First off, you'll want to state which model of router you have. There's quite a few now in the Linksys Marvell lineup.
Secondly, no one is going to have a config file to just drop in and work - everyone's is specific to their own needs and network setup. You might be better off asking, for example, what channel & values to you use on the 5Ghz radio for best performance? Something more specific might get you what you are looking for.
Good point, the question is far to broad and vague considering the hundreds of different configurations we use, for instance I use PPPOE if you are a more standard user you'd be using DHCP from your IP, my settings would shut down your internet. _________________ WRT3200ACM
Joined: 13 Jun 2006 Posts: 1608 Location: SE Michigan USA
Posted: Fri Feb 09, 2018 16:57 Post subject:
Optimal in one environment is not the same in another environment wireless wise. It is a try and see what works for your environment. There are way too many options in dd-wrt to say what is best. Is USB used, if so what is it used for, what format is the USB drive, is VPN being used, and the list goes on and on.
Joined: 02 Aug 2017 Posts: 153 Location: Central Michigan
Posted: Fri Feb 09, 2018 19:43 Post subject:
aairon wrote:
With a WRT3200ACM it's a try, try, try and then try some more lol.
And that's with every new Release!!!
Something that worked on one release may not on the next.
It's a work in progress with every new release. _________________ ISP: Charter
Modem: Netgear CM600
Router:(2) Asus RT-AC86U Merlin 384.5
Router: LinksysWRT3200Acm{RIP}
Router: Linksys EA8500 kongat r35030m (Vpn)
Router: Netgear X4S kongat r35965M
Vpn: IpVanish
Unbrick your 3200acm with usb to ttl cable: https://tinyurl.com/y9azvrkg
With a WRT3200ACM it's a try, try, try and then try some more lol.
And that's with every new Release!!!
Something that worked on one release may not on the next.
It's a work in progress with every new release.
Absolutely...And it also depends on what's important to the user (features) as far as what's working and what's not...
I was on 34777 until I found out that DLNA was broken...Flashed back to 34578 which fixed DLNA but SCHEDULED REBOOT in that was not working...Now I'm back to 34315...
------------
WRT1900ACSV2
Joined: 18 Aug 2009 Posts: 597 Location: Antigua/Seattle
Posted: Fri Feb 09, 2018 21:50 Post subject:
At this point I'm confidant that Brain Slayer will get it sorted out for those who need NTP Very soon.
It was fixed for a short time and will be again I'm sure.
As far as DLNA that would depend on the driver?
I see 34315 DLNA was working?? _________________ WRT3200ACM
At this point I'm confidant that Brain Slayer will get it sorted out for those who need NTP Very soon.
It was fixed for a short time and will be again I'm sure.
As far as DLNA that would depend on the driver?
I see 34315 DLNA was working??
Yes..DLNA is working in 34315...I'm on it now and tested it this morning to confirm.
Also my NTP had quit working in 34578 but I got it
working again in 34315 (time.nist.gov) but I had to
change time zones a couple of times then got it to sync up for me on US/Pacific.
Joined: 18 Aug 2009 Posts: 597 Location: Antigua/Seattle
Posted: Fri Feb 09, 2018 22:17 Post subject:
DaveI wrote:
aairon wrote:
At this point I'm confidant that Brain Slayer will get it sorted out for those who need NTP Very soon.
It was fixed for a short time and will be again I'm sure.
As far as DLNA that would depend on the driver?
I see 34315 DLNA was working??
Yes..DLNA is working in 34315...I'm on it now and tested it this morning to confirm.
Also my NTP had quit working in 34578 but I got it
working again in 34315 (time.nist.gov) but I had to
change time zones a couple of times then got it to sync up for me on US/Pacific.
Joined: 18 Aug 2009 Posts: 597 Location: Antigua/Seattle
Posted: Fri Feb 09, 2018 23:45 Post subject:
aairon wrote:
DaveI wrote:
aairon wrote:
At this point I'm confidant that Brain Slayer will get it sorted out for those who need NTP Very soon.
It was fixed for a short time and will be again I'm sure.
As far as DLNA that would depend on the driver?
I see 34315 DLNA was working??
Yes..DLNA is working in 34315...I'm on it now and tested it this morning to confirm.
Also my NTP had quit working in 34578 but I got it
working again in 34315 (time.nist.gov) but I had to
change time zones a couple of times then got it to sync up for me on US/Pacific.
Sent you a message.
For your time zone you can just set NTP ON deafult but place America/Los angles in the upper pull down and leave the server blank you will get correct time always. those selections in the pull down don't all work properly. _________________ WRT3200ACM
Yep...That worked fine.
That means he must have an NTP server hard coded into the firmware.
aairon wrote:
For your time zone you can just set NTP ON deafult but place America/Los angles in the upper pull down and leave the server blank you will get correct time always. those selections in the pull down don't all work properly.
With a WRT3200ACM it's a try, try, try and then try some more lol.
And that's with every new Release!!!
Something that worked on one release may not on the next.
It's a work in progress with every new release.
Absolutely...And it also depends on what's important to the user (features) as far as what's working and what's not...
I was on 34777 until I found out that DLNA was broken...Flashed back to 34578 which fixed DLNA but SCHEDULED REBOOT in that was not working...Now I'm back to 34315...
For my case, the scheduled reboot has been on and off since the december 2017 build but what i did then and up to build 34578 to get it working again was to disable schedule reboot, enable, save, and apply settings - i can confirm that it is working with 34578. NTP also works with 34578. _________________ Router: Linksys WRT1200AC v2
Firmware: DD-WRT v3.0-r44048 std [08/02/20]
