Changelogs: SVN Changelog:through34929 (last build was 34886)
Summary: (deprecated after 29739)
Notes: 1. SFE accelerated NAT is in 33006+ builds but only in kernel 3.10 and newer 2. krack fixes for Broadcom were completed in 33678, including k26 (33655) & k24 (33656).
3. The fix for DIR-868L & DIR-880L was done in 34093 (34311 build): see 5518 and 5963 - thanks to quarkysg
Tickets closed as 'fixed' in this build (Broadcom-related and general): 1. mwchang reported port forwarding fixed in 34876; anyone else? http://svn.dd-wrt.com/ticket/6162 2. NTP is fixed in r34887: 6137, 6175, & 6176 3. (5911) WRT54GL Bricks after flash (r32597 ~)
4. (5771) Busybox 1.26.2, broken wget:
Kong wrote:
fixes openvpn server and freeradius server cert generation, also enable some features again that were previously enabled by default
Issues, observations, and/or workarounds reported: 1. (egc) Policy-Based Routing broken if SFE enabled: http://svn.dd-wrt.com/ticket/5900 quarkysg's PBR+SFE fix: http://svn.dd-wrt.com/ticket/5986 2. (egc) "OpenVPN 2.4 is stable but you have to tweak your config" with: `mtu-disc yes` & `proto udp4` 3. (matsalla) Trendnet TEW-812DRU v2 build too big to flash6144 4. (SinCalChewy) Trendnet TEW-811DRU also too big; [same ticket]
Template to copy (after "Code:") for posting a reply:
WARNING:This build thread is for reporting successes and problem with loading this experimental test build.
This is important info for developers and users. Always state your hardware model, version, and SPECIFIC build (e.g. dd-wrt.v24-33555_NEWD-2_K3.x_mega-nv64k.bin). Create your own thread to discuss any specific problems or questions, and please do not respond to such questions. This thread is to report info, not to seek answers, so posts not meeting this criteria may be deleted or moved. It is important to adhere to these requirements, to keep this thread from becoming impossibly long and useless. If you don't understand the risk or know what build to flash and how to flash properly, with a means of recovery if it bricks, do NOT flash this experimental test build. _________________ #NAT/SFE/CTF: limited speed w/ DD#Repeater issues#DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo#
OPNsense x64 5050e ITX|DD: DIR-810L, 2*EA6900@1GHz, R6300v1, RT-N66U@663, WNDR4000@533, E1500@353,
WRT54G{Lv1.1,Sv6}@250|FreshTomato: F7D8302@532|OpenWRT: F9K1119v1, RT-ACRH13, R6220, WNDR3700v4
Last edited by jwh7 on Mon Feb 26, 2018 14:50; edited 5 times in total
This build number brings in my memory build 14929 which i still have on my first ddwrt router, a retired wrt160nv3. Only 20,000 changesets apart. Will test it later on an E3000, waiting for some success reports first!
Router/Version: Asus RT-87U
Firmware: DD-WRT v3.0-r34929 std (02/12/18 )
Kernel: Linux 4.4.115 #2600 SMP Mon Feb 12 10:13:14 CET 2018 armv7
Previous: DD-WRT v3.0-r34886 std (02/10/18 )
Mode/Status: Client Bridge/ Operating as expected
Reset: No
Issues/Errors: NTP is now working. Tested from both the GUI and manually from the CLI _________________ Location (urban) - 1x Linksys EA8500 (AP wlan0 & wlan1 enabled)
1x Asus 68u (Repeater Bridge w/VAP) - wl0 disabled
1x Asus 87u (Client Bridge) - wl1 disabled
Posted: Mon Feb 12, 2018 20:50 Post subject: ASUS RT-AC68U & Linksys E2000
Asus RT-AC68U
Firmware: DD-WRT v3.0-r34929 std (02/12/1 - (previous r34876)
Kernel: Linux 4.4.115 #2593 SMP Sat Feb 10 09:57:20 CET 2018 armv7l
5Ghz (Mixed) with 80Mhz channel width: Ok
SSH: Ok
Telnet: Disabled but tested to work
Site Survey: Ok
Wi-viz Survey 2.4Ghz & 5Ghz: Ok
Reset: No
Status: Ok
Uptime: 11 min
CPU Temperature: CPU 65.8 °C / WL0 45.3 °C / WL1 45.2 °C
2 x E2000
Firmware: DD-WRT v3.0-r34929 mega (02/12/1 - (previous r34876)
Kernel: Linux 3.10.108-dd #17736 Mon Feb 12 15:30:43 CET 2018 mips
2.4Ghz (NG-mixed) with 40Mhz channel width: Ok
SSH: Ok
Telnet: Disabled but tested to work
Site Survey: Ok
Wi-viz Survey 2.4Ghz: Ok
Reset: No
Status: Ok
Uptime: 21 min
CPU Temperature: WL0 53.2 °C
NTP Working again !
All devices working as AP's each with individual 1Gb wired connections to main firewall
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r34929 std ( 02/12/18 )
Kernel: Linux 4.4.115 #2593 SMP Sat Feb 10 09:57:20 CET 2018 armv7l
Previous: r34876
Mode/Status: Gateway / working
Reset: no, at first, then reset after forgetting password.
Issues/Errors: None so far (NTP works!)
Uptime: 52m
Temperatures: CPU 58.0 °C / WL0 43.6 °C / WL1 47.5 °C
Last edited by flyzipper on Sat Feb 17, 2018 22:40; edited 1 time in total
Joined: 09 Nov 2014 Posts: 314 Location: Bakersfield, CA
Posted: Mon Feb 12, 2018 23:04 Post subject:
Router/Version: 2x Linksys E3000
Firmware: dd-wrt.v24-34929_NEWD-2_K3.x_mega-e3000.bin
Kernel: Linux 3.10.108-dd #17736 Mon Feb 12 15:30:43 CET 2018 mips
Previous: dd-wrt.v24-34876_NEWD-2_K3.x_mega-e3000.bin
Mode/Status: Client bridges, working.
Reset: No.
Issues/Errors: None thus far, speedtests seem normal. Very minimal setup though, but working great as client bridges.
TrendNet 811DRU is still too big of a file to fit on the flash. Been that way for awhile now. _________________ Deployed Routers:
Netgear R7800 - 1x build 46979
- Gateway (USB /w Entware, CAKE QoS)
Netgear R7000 - 3x build 46979
Resetting to defaults on an E1500 with a k3 build kills the wireless. Flashing a k3 build over a k2.6 build without resetting to defaults the wireless works still. This issue has been around for at least a year.
This router is similar to the E900 and E1200 v2 yet those two routers don't seem to have this issue. When looking at specs the only real difference I see between these 3 routers is that the Broadcom 5357 in the E1500 is listed as a "BCM5357B0" where the chip in the E900 and E1200 v2 is listed as a Broadcom "BCM5357C0"
If there is any extra info I can provide to help this get fixed just let me know.
Router/Version: TPLINK Archer C9 v1 Firmware: DD-WRT v3.0-r34929 std (02/12/1 Kernel: Linux 4.4.115 #2595 SMP Mon Feb 12 09:40:43 CET 2018 armv7l Previous: r34777 Mode/Status: Using as AP, WAN and DHCP disabled Reset: No Issues/Errors: None so far. Skipped r34876 due to NTP issue.
Router/Version: Netgear WNDR4000
Firmware: DD-WRT v3.0-r34929 mega ( 02/12/18 )
Kernel: Linux 3.10.108-dd #17736 Mon Feb 12 15:30:43 CET 2018 mips
Previous: 34080
Reset: No
Mode/Status: 2.4 GHz CB + 5 GHz AP
Issues/Errors: Time wasn't working so I tried adding an NTP server; no help. Reboot also didn't help. Running `ntpclient us.pool.ntp.org` fixed it.
Edit: In reference to svn.dd-wrt.com/ticket/6137#comment:18
I tried using an ntp IP vs the domain name; no difference. In testing this, one of the few times I rebooted, the 5 GHz radio (and it's guest VAP) were missing (both in the GUI and in a site scan). _________________ #NAT/SFE/CTF: limited speed w/ DD#Repeater issues#DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo#
OPNsense x64 5050e ITX|DD: DIR-810L, 2*EA6900@1GHz, R6300v1, RT-N66U@663, WNDR4000@533, E1500@353,
WRT54G{Lv1.1,Sv6}@250|FreshTomato: F7D8302@532|OpenWRT: F9K1119v1, RT-ACRH13, R6220, WNDR3700v4
Last edited by jwh7 on Wed Feb 14, 2018 23:28; edited 1 time in total
Joined: 26 Mar 2013 Posts: 1855 Location: Hung Hom, Hong Kong
Posted: Tue Feb 13, 2018 4:10 Post subject: Asus RT-N18U and DD-WRT BS build 34929
Router/Version: Asus RT-N18U
Firmware: DD-WRT v3.0-r34929 std (02/12/18 )
Kernel: Linux 4.4.115 #2597 Mon Feb 12 09:49:00 CET 2018 armv7l
Previous: DD-WRT v3.0-r34886 std (02/10/18 )
Mode/Status: Access Point (AP), Wired Working, Wireless working
Reset: NO reset during firmware upgrade
Issues/Errors:
1. The ping to www.google.com increased from 2ms to 13ms
Miscellaneous:
- Router not using IPV6, VPN nor USB)
- Router is NOT working 24/7
- LAN LED ... too lazy to check! Meow... >@.@<
Old problems:
a. DDNS (inadyn) crashed in build 31722
b. Testing port-forwarding via WAN IP from within LAN not working in builds 34411-34760. Needed external proxy server.
c. NTP client not working in builds 34886-34876
speedtest.net.asus.rt-n18u.dd-wrt.bs.34929.png
Description:
Speedtest.net result for Asus RT-N18U and DD-WRT BS build 34929
Filesize:
10.67 KB
Viewed:
10355 Time(s)
_________________ Router: Asus RT-N18U (rev. A1)
Drink, Blink, Stretch! Live long and prosper! May the Force and farces be with you!
Router/Version: Buffalo WZR-1750DHP/DHPD Firmware: DD-WRT v3.0-r34929 std (02/12/1 Kernel: Linux 4.4.115 #2593 SMP Sat Feb 10 09:57:20 CET 2018 armv7l Previous: BSr34760 Mode/Status: Working Reset: yes via webGUI Issues/Errors: Yes
Errors:- Internet access light on the router loads without any issues as long as i do not use the DNSCrypt server Anatomical DNS, if i do use that server, which is what i was using for a while now, the Internet access light just won't load now so i am guessing that the issue is with the DNSCrypt. I am now using the SecureDNS, uncensored and no logging, Amsterdam, Netherlands without any issues.
Next error is the no overclocking support anymore only the down clocking is allowed, please bring that back.
Router/Version: Asus RT-AC87U
Firmware: DD-WRT v3.0-r34929 std (02/12/18 )
Kernel: Linux 4.4.115 #2600 SMP Mon Feb 12 10:13:14 CET 2018 armv7l
Previous: r34311
Mode/Status: AP, Router
Reset: No
Issues/Errors: none so far
Internet works good now with this build and everything seems ok. The last good working build was r34311. _________________ Home router: Asus RT-AC87U, H/W Ver: A2 (DD-WRT v3.0-r33xxx)
asus ddns + entware-ng + transmission + USB3 1Tb Seagate drive ext4 formatted.