[windyboi]

Hi all,

I'm rather struggling to set up VLANs properly, having had to factory reset DD-WRT three times now I'm asking for some much needed help!

Firstly, my setup and what I am trying to achieve:

pfSense -> Netgear R7000 DD-WRT (access point / switch only)

I have created four VLAN's on the LAN interface of pfSense
VLAN11
VLAN12
VLAN13
VLAN14

I have five ports on my R7000 including the WAN. Three ports are used for network devices and I would like to tag a VLAN to each of those, one port is used to connect to pfSense, and I have 1 port spare for future expansion. I have also created two new SSID's so I have a total of 3 SSIDs which will all be on separate VLANs

I've tried to follow the instructions here to no avail https://forum.pfsense.org/index.php?topic=43147.0

I'm rather confused by what exactly I need to specify in the Setup -> VLANS and the Setup -> Networking to get this to work. Would really appreciate help getting me on track

Thank you

[Per Yngve Berg]

VLAN configuration is chip-set dependant. For an R7000, please see the Broadcom Forum.

[windyboi]

Thank you, will do