New build is out 35667 (BS) 2018-04-04

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2  Next
Author Message
kt_haddock
DD-WRT Guru


Joined: 25 Dec 2009
Posts: 710

PostPosted: Wed Apr 04, 2018 13:14    Post subject: New build is out 35667 (BS) 2018-04-04 Reply with quote
ftp://ftp.dd-wrt.com/betas/2018/


Your reports for Broadcom units are greatly appreciated !
Router:
Firmware:
Kernel:
Status:
Reset:
Errors:

This build thread is for reporting successes and problem with loading this experimental test build. This is important info for developers and users. Always state your hardware and SPECIFIC build (e.g. 35667_NEWD-2_K2.6_mega-nv64k.bin). Do not ask questions about your specific router or how to configure it in this thread; create your own thread to discuss any specific problems you have or need resolved. Please also do not respond to such questions. This thread is to report info, not to seek it. Posts that do not add to understanding this build will be deleted. Make sure you know how to flash properly and the risk before using this build. It is important to adhere to these requirements, to keep this thread from becoming impossibly long and useless.
If you don't know what build to flash and how to flash properly and have a means of recovery if things should go wrong, do NOT flash this experimental test build.

_________________
[I prefer answere in whole sentence]
Sponsor
flyzipper
DD-WRT Guru


Joined: 21 Feb 2016
Posts: 504

PostPosted: Wed Apr 04, 2018 19:38    Post subject: Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r35667 std ( 04/04/18 )
Kernel: Linux 4.4.126 #2873 SMP Tue Apr 3 17:09:08 CEST 2018 armv7l
Previous: r35531
Mode/Status: Gateway / working
Reset: no
Issues/Errors: None so far.

Uptime: 1h 46m
Temperatures: CPU 59.7 °C / WL0 44.4 °C / WL1 48.0 °C

smitna
DD-WRT Novice


Joined: 04 Jan 2011
Posts: 29
Location: Germany

PostPosted: Wed Apr 04, 2018 20:09    Post subject: Reply with quote
Router/Version: Asus RT-AC88U
Firmware: DD-WRT v3.0-r35531 std
Kernel: 4.4.124 #2813 SMP Mon Mar 26 07:52:16 CEST 2018 armv7l
Reset?/Mode: No
Issues/Errors: Yes:

New build 35667 firmware filesize too big (think about ~100 KB more than 35531), flashing from GUI not possible, after reboot still on 35531.
labo
DD-WRT Guru


Joined: 30 Jan 2015
Posts: 676
Location: Texas, USA

PostPosted: Wed Apr 04, 2018 20:20    Post subject: Reply with quote
Router: Netgear R8000 as RB
Firmware: DD-WRT v3.0-r35667 std (04/04/1Cool
Kernel: Linux 4.4.126 #2878 SMP Wed Apr 4 07:33:42 CEST 2018 armv7l
Reset: No
Status: Up and running
Errors:

---- Router time is set to GMT Syslog NTP time is not working:

-----Warnings flooding the syslog: Issue seems to be specific to R8000. I have R7000 as RB no issues like this.

Jan 1 00:22:28 durango-r8k kern.warn kernel: br0: received packet on eth2 with own address as source address
Jan 1 00:22:29 durango-r8k kern.warn kernel: br0: received packet on eth2 with own address as source address

_________________
ASUS GT-BE98 PRO Main: Fiber 5gbps up/down
ASUS AXE16000: AI Mesh node
2 X ASUS RT-AX89X: AI Mesh nodes
QNAP QSW-1208-8C 12-Port 10GbE Switch
XS712T ProSafe 12-Port 10GbE Switch
3 X R9000 DD-WRT Mesh
jwh7
DD-WRT Guru


Joined: 25 Oct 2013
Posts: 2670
Location: Indy

PostPosted: Wed Apr 04, 2018 20:27    Post subject: Reply with quote
smitna wrote:
Router/Version: Asus RT-AC88U
[...]
New build 35667 firmware filesize too big (think about ~100 KB more than 35531), flashing from GUI not possible, after reboot still on 35531.
Ticket: http://svn.dd-wrt.com/ticket/6144

Merging from the other build thread:
chenshaoju wrote:
Sorry for my English.

Router: Netgear R7000
Firmware: 2018-04-04 (r35667) netgear-r7000-webflash.bin
Kernel: Linux 4.4.126 #2873 SMP Tue Apr 3 17:09:08 CEST 2018 armv7l
Status: Few functionality failed.
Reset: No

After update from r35531 to r35667, The DHCP looks failed, Client can't get the IP address, And DNSMasq looks failed too, DNS forwarding(?) is not working.

Is anyone else have the same issue? If just me I guess need reset the route and re-configure. Shocked
Ticket: http://svn.dd-wrt.com/ticket/6255
_________________
# NAT/SFE/CTF: limited speed w/ DD # Repeater issues # DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo #
OPNsense x64 5050e ITX|DD: DIR-810L, 2*EA6900@1GHz, R6300v1, RT-N66U@663, WNDR4000@533, E1500@353,
WRT54G{Lv1.1,Sv6}@250
|FreshTomato: F7D8302@532|OpenWRT: F9K1119v1, RT-ACRH13, R6220, WNDR3700v4
smitna
DD-WRT Novice


Joined: 04 Jan 2011
Posts: 29
Location: Germany

PostPosted: Wed Apr 04, 2018 20:47    Post subject: Reply with quote
smitna wrote:
Router/Version: Asus RT-AC88U
[...]
New build 35667 firmware filesize too big (think about ~100 KB more than 35531), flashing from GUI not possible, after reboot still on 35531.


jwh7 wrote:

Ticket: http://svn.dd-wrt.com/ticket/6144


Thanks,

yes, but there is not only one ticket about this. The problem is well-known and not solved since over one year.
Brimmy
DD-WRT User


Joined: 29 Mar 2015
Posts: 398

PostPosted: Wed Apr 04, 2018 21:20    Post subject: Reply with quote
Router/Version: Buffalo WZR-1750DHP/DHPD
Firmware: DD-WRT v3.0-r35667 std (04/04/18
Kernel: Linux 4.4.126 #2873 SMP Tue Apr 3 17:09:08 CEST 2018 armv7l
Previous: BSr34760
Mode/Status: same as r35531
Reset: yes via webGUI
Issues/Errors: DNSCrypt kills internet connection only if i use a resolver that is not IPV6, no overclocking support and NTP does not load only if i use a DNSCrypt resolver that is not IPV6

Jan 1 00:00:25 ThePort user.info : + DNS Security Extensions are supported
Jan 1 00:00:25 ThePort user.info : + Provider supposedly doesn't keep logs
Jan 1 00:00:25 ThePort daemon.notice dnscrypt-proxy[1172]: Starting dnscrypt-proxy 1.9.5
Jan 1 00:00:25 ThePort daemon.info dnscrypt-proxy[1172]: Generating a new session key pair
Jan 1 00:00:25 ThePort kern.notice kernel: random: nonblocking pool is initialized
Jan 1 00:00:25 ThePort daemon.info dnscrypt-proxy[1172]: Done
Jan 1 00:00:25 ThePort daemon.info dnscrypt-proxy[1172]: Server certificate with serial #1522796401 received
Jan 1 00:00:25 ThePort daemon.info dnscrypt-proxy[1172]: This certificate has not been activated yet
Jan 1 00:00:25 ThePort daemon.err dnscrypt-proxy[1172]: No useable certificates found
Jan 1 00:00:26 ThePort daemon.info dnscrypt-proxy[1172]: Refetching server certificates
Jan 1 00:00:26 ThePort daemon.info dnscrypt-proxy[1172]: Server certificate with serial #1522796401 received
Jan 1 00:00:26 ThePort daemon.info dnscrypt-proxy[1172]: This certificate has not been activated yet
Jan 1 00:00:26 ThePort daemon.err dnscrypt-proxy[1172]: No useable certificates found
Jan 1 00:00:26 ThePort kern.info kernel: br0: port 1(vlan1) entered forwarding state
Jan 1 00:00:26 ThePort kern.info kernel: br0: port 2(eth1) entered forwarding state
Jan 1 00:00:26 ThePort kern.info kernel: br0: port 3(eth2) entered forwarding state
Jan 1 00:00:29 ThePort daemon.info dnscrypt-proxy[1172]: Refetching server certificates
Jan 1 00:00:29 ThePort daemon.info dnscrypt-proxy[1172]: Server certificate with serial #1522796401 received
Jan 1 00:00:29 ThePort daemon.info dnscrypt-proxy[1172]: This certificate has not been activated yet
Jan 1 00:00:29 ThePort daemon.err dnscrypt-proxy[1172]: No useable certificates found
Jan 1 00:00:35 ThePort daemon.info dnscrypt-proxy[1172]: Refetching server certificates
Jan 1 00:00:35 ThePort daemon.info dnscrypt-proxy[1172]: Server certificate with serial #1522796401 received
Jan 1 00:00:35 ThePort daemon.info dnscrypt-proxy[1172]: This certificate has not been activated yet
Jan 1 00:00:35 ThePort daemon.err dnscrypt-proxy[1172]: No useable certificates found
Jan 1 00:00:44 ThePort daemon.info dnscrypt-proxy[1172]: Refetching server certificates
Jan 1 00:00:44 ThePort daemon.info dnscrypt-proxy[1172]: Server certificate with serial #1522796401 received
Jan 1 00:00:44 ThePort daemon.info dnscrypt-proxy[1172]: This certificate has not been activated yet
Jan 1 00:00:44 ThePort daemon.err dnscrypt-proxy[1172]: No useable certificates found
Jan 1 00:00:56 ThePort daemon.info dnscrypt-proxy[1172]: Refetching server certificates
Jan 1 00:00:57 ThePort daemon.info dnscrypt-proxy[1172]: Server certificate with serial #1522796401 received
Jan 1 00:00:57 ThePort daemon.info dnscrypt-proxy[1172]: This certificate has not been activated yet
Jan 1 00:00:57 ThePort daemon.err dnscrypt-proxy[1172]: No useable certificates found
Jan 1 00:01:12 ThePort daemon.info dnscrypt-proxy[1172]: Refetching server certificates
Jan 1 00:01:12 ThePort daemon.info dnscrypt-proxy[1172]: Server certificate with serial #1522796401 received
Jan 1 00:01:12 ThePort daemon.info dnscrypt-proxy[1172]: This certificate has not been activated yet
Jan 1 00:01:12 ThePort daemon.err dnscrypt-proxy[1172]: No useable certificates found
Jan 1 00:01:30 ThePort daemon.info dnscrypt-proxy[1172]: Refetching server certificates
Jan 1 00:01:30 ThePort daemon.info dnscrypt-proxy[1172]: Server certificate with serial #1522796401 received
Jan 1 00:01:30 ThePort daemon.info dnscrypt-proxy[1172]: This certificate has not been activated yet
Jan 1 00:01:30 ThePort daemon.err dnscrypt-proxy[1172]: No useable certificates found
Jan 1 00:01:51 ThePort daemon.info dnscrypt-proxy[1172]: Refetching server certificates
Jan 1 00:01:51 ThePort daemon.info dnscrypt-proxy[1172]: Server certificate with serial #1522796401 received
Jan 1 00:01:51 ThePort daemon.info dnscrypt-proxy[1172]: This certificate has not been activated yet
most of the text is not highlighted in any color but Jan 1 00:00:57 ThePort daemon.err dnscrypt-proxy[1172]: No useable certificates found is in red
immi803
DD-WRT Novice


Joined: 17 Mar 2018
Posts: 20

PostPosted: Wed Apr 04, 2018 21:31    Post subject: Serious issues on Linksys E4200 v1 Reply with quote
@kt_haddock

Build 35667 has some serious issues with E4200 v1 as it disturbed radios as in 2.4 ghz , no options appearing as g ,n , etc , only disable option showing
Secondly on 5ghz, it copied same channels of 2.4 ghz and 5ghz radio totally turned crap
No Wi-Fi client is able to connect

Reporting after several trials for this new build to work for e4200, i tried v Broadcom K26 big and mega builds nv60k and none of them worked in this context

Hope to get it fixed very soon in next beta
Reverted back to previous build, that was working perfect with e4200
chenshaoju
DD-WRT User


Joined: 10 Apr 2008
Posts: 100
Location: Chinese Mainland

PostPosted: Thu Apr 05, 2018 1:39    Post subject: Reply with quote
jwh7 wrote:
Ticket: http://svn.dd-wrt.com/ticket/6255


Thank you, And yes, I'm running multiple DHCP servers for guest AP and guest LAN port. Smile

_________________
NetGear R7000
DD-WRT v3.0-r52894 std
thisisthemilos
DD-WRT Novice


Joined: 05 Apr 2018
Posts: 2

PostPosted: Thu Apr 05, 2018 1:43    Post subject: Re: Serious issues on Linksys E4200 v1 Reply with quote
immi803 wrote:


Hope to get it fixed very soon in next beta
Reverted back to previous build, that was working perfect with e4200


What build are you using? I'm just getting set up for the first time and trying to figure out which build to use.
ian5142
DD-WRT Guru


Joined: 23 Oct 2013
Posts: 2318
Location: Canada

PostPosted: Thu Apr 05, 2018 2:24    Post subject: Upgrade Reply with quote
Router/Version: Asus N66u
Firmware: 35667
Previous: 35244
Mode/Status: Gateway, DHCP, QoS
Reset: No
Issues/Errors: None, so far.

_________________
Before asking a question on the forums, update dd-wrt: Where do I download firmware? I suggest reading it all.
QCA Best WiFi Settings


Some dd-wrt wiki pages are up to date, others are not. PM me if you find an old one.

Atheros:
Netgear R7800 x3 - WDS AP / station, gateway, QoS
TP-Link Archer C7 v2 x2 - WDS Station
TP-Link TL-WDR3600 v1 - WDS Station
TP-Link 841nd v8 - NU
D-Link 615 C1/E3/I1 x 7 - 1 WDS station
D-Link 825 B1 - NU
D-Link 862L A1 x2 - WDS Station
Netgear WNDR3700v2 - NU
UBNT loco M2 x2 - airOS

Broadcom
Linksys EA6400 - Gateway, QoS
Asus N66U - AP
Netgear WNDR3700v3 - not used
MediaTek
UBNT EdgeRouter X - switch
mwchang
DD-WRT Guru


Joined: 26 Mar 2013
Posts: 1855
Location: Hung Hom, Hong Kong

PostPosted: Thu Apr 05, 2018 5:48    Post subject: Quick test on BS build 35667 using Asus RT-N18U Reply with quote
Router/Version: Asus RT-N18U
Firmware: DD-WRT v3.0-r35667 std (04/04/1Cool
Kernel: Linux 4.4.126 #2877 Wed Apr 4 07:27:44 CEST 2018 armv7l
Previous: DD-WRT v3.0-r35531 std (03/26/1Cool
Mode/Status: Access Point (AP), Wired Working
Reset: Yes (erase nvram; reboot)
Issues/Errors:

1. DHCP: OK
2. Port-forwarding: OK
3. DDNS: OK
4. Wireless: OK
6. NTP time update: OK
5. Access to internet: OK

Problems:

1. DNSmasq *NOT* restarted properly after changing values related to DNS in Setup->Basic Setup! It gave me a false impression that the ping to www.google.com was increased by 10ms, even after I specified 1.1.1.1 in DNS. Manually restarting DNSmasq using stopservice and startservice fixed it.

The experiment was further complicated by Window$' caching of DNS results. Needed to use command "ipconfig /flushdns" to avoid misleading results.

Anyway, I noticed that the DNS settings in Setup->Basic Setup was quite confusing. I will start a new thread on this. Right now, I could say options that're related to "Local DNS" was completely useless. It should be taken out. And that /etc/resolv.conf was always "192.168.1.1" no matter how I altered DNS settings.

Syslog error messages:
Code:
root@DD-WRT:~# cd /var/log
root@DD-WRT:/tmp/var/log# grep -i err messages
Apr  5 05:47:03 DD-WRT daemon.info mstpd: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 7
Apr  5 05:47:03 DD-WRT daemon.err httpd[2115]: Request Error Code 404: File not found.



7200582324.png
 Description:
Speedtest.net result for Asus RT-N18U and DD-WRT BS build 35667
 Filesize:  10.57 KB
 Viewed:  6531 Time(s)

7200582324.png



_________________
Router: Asus RT-N18U (rev. A1)

Drink, Blink, Stretch! Live long and prosper! May the Force and farces be with you!

Facebook: https://www.facebook.com/changmanwai
Website: https://sites.google.com/site/changmw
SETI@Home profile: http://setiathome.berkeley.edu/view_profile.php?userid=211832
GitHub: https://github.com/changmw/changmw


Last edited by mwchang on Thu Apr 05, 2018 12:37; edited 1 time in total
immi803
DD-WRT Novice


Joined: 17 Mar 2018
Posts: 20

PostPosted: Thu Apr 05, 2018 11:15    Post subject: Re: Serious issues on Linksys E4200 v1 Reply with quote
thisisthemilos wrote:
immi803 wrote:


Hope to get it fixed very soon in next beta
Reverted back to previous build, that was working perfect with e4200


What build are you using? I'm just getting set up for the first time and trying to figure out which build to use.


use trail build mini first flash than i recoomend 03-26-2018-r35531/ big build from Broadcom k26 as it works perfect with e4200

Don't use 35667 as e4200 v1 will run into wireless problems

Regards
labo
DD-WRT Guru


Joined: 30 Jan 2015
Posts: 676
Location: Texas, USA

PostPosted: Thu Apr 05, 2018 12:32    Post subject: Reply with quote
Router: Netgear R7000 as RB
Reset: No
Status: Not working
Errors: 5Ghz Wireless can't connect to AP as epeater bridge, scans channels forever.
Reverted back to: DD-WRT v3.0-r35452 std (03/20/1Cool

_________________
ASUS GT-BE98 PRO Main: Fiber 5gbps up/down
ASUS AXE16000: AI Mesh node
2 X ASUS RT-AX89X: AI Mesh nodes
QNAP QSW-1208-8C 12-Port 10GbE Switch
XS712T ProSafe 12-Port 10GbE Switch
3 X R9000 DD-WRT Mesh
wicket
DD-WRT Novice


Joined: 18 Jul 2017
Posts: 45
Location: Wisconsin, USA

PostPosted: Thu Apr 05, 2018 13:07    Post subject: Broke WiFi Reply with quote
Router/Version: Linksys EA6500 v1
Firmware: DD-WRT v3.0-r35667 giga ( 04/04/18 )
Kernel: Linux 3.10.108-dd #18472 Wed Apr 4 12:20:52 CEST 2018 mips
Previous: DD-WRT v3.0-r35531 giga ( 03/26/18 )
Mode/Status: Gateway/AP
Setup: Using IPv6 via DNSMasq, DDNS, & Port Range Forward.
Reset: No
Issues/Errors: No WiFi

Nothing I own can connect via WiFi after this update, the network shows its there when using WiFi Analyzer, but I am unable to see it in the connect list with any device. I'm assuming there is an issue with DHCP will be rolling back to r35531

_________________
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum