Notes: 1. SFE accelerated NAT is in 33006+ builds but only in kernel 3.10 and newer 2. krack fixes for Broadcom were completed in 33678, including k26 (33655) & k24 (33656).
3. BS made a couple NTP changes in changesets 35454 and 35455; hopefully that fixes those issues.
Tickets closed as 'fixed' (Broadcom-related and general): 6255: DHCP is broken as of 35667
Issues, observations, and/or workarounds reported: 1. (egc) Policy-Based Routing broken if SFE enabled: http://svn.dd-wrt.com/ticket/5900 quarkysg's PBR+SFE fix: http://svn.dd-wrt.com/ticket/5986 2. (egc) "OpenVPN 2.4 is stable but you have to tweak your config" with: `mtu-disc yes` & `proto udp4` 3.Many router builds too big to flash: http://svn.dd-wrt.com/ticket/6144 4. (Brimmy) WZR-1750DHP/DHPD DNSCrypt kills internet connection, no overclocking, NTP does not load 5.Various reports of wireless and VAP (repeater/guest) issues: tickets 6258, 6259, 6260 (Magnetron1.1) Workaround: Add a Startup Script with `sleep 5;stopservice lan;startservice lan`
[and/or to fix in runtime, use those stop and start commands from telnet/ssh/Commands]
Template to copy (after "Code:") for posting a reply:
WARNING:This build thread is for reporting success and/or problems with loading this experimental test build.
This is important info for developers and users. Always state your hardware model, version, and SPECIFIC build (e.g. dd-wrt.v24-33555_NEWD-2_K3.x_mega-nv64k.bin). Create your own thread to discuss any specific problems or questions, and refrain to respond as this thread is for reporting, not support. Posts not meeting this criteria may be deleted or moved. It is important to adhere to these requirements, to keep this thread from becoming impossibly long and useless. If you don't understand the risk or know what build to flash and how to flash properly, with a means of recovery if it bricks, do NOT flash this experimental test build. _________________ #NAT/SFE/CTF: limited speed w/ DD#Repeater issues#DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo#
OPNsense x64 5050e ITX|DD: DIR-810L, 2*EA6900@1GHz, R6300v1, RT-N66U@663, WNDR4000@533, E1500@353,
WRT54G{Lv1.1,Sv6}@250|FreshTomato: F7D8302@532|OpenWRT: F9K1119v1, RT-ACRH13, R6220, WNDR3700v4
Last edited by jwh7 on Thu Apr 19, 2018 23:18; edited 4 times in total
Router/Version: E3000 and E4200 V1
Firmware: ftp://ftp.dd-wrt.com/betas/2018/04-06-2018-r35681/broadcom_K3X/dd-wrt.v24-35681_NEWD-2_K3.x_mega-e3000.bin
Kernel: 3.10.108-dd
Previous: 35667/35531 (tried from both)
Mode/Status: Switch/AP
Reset: No
Issues/Errors: 2.4 GHz radio GUI is limited to 11 channels instead of 13, in pratice this is restricted to channel 1 (sysinfo page), I guess the radio does not work (bizarre MAC address reported -- such manufacturer does not exist). _________________ 2 times APU2 Opnsense 21.1 with Sensei
2 times RT-AC56U running DD-WRT 45493 (one as Gateway, the other as AP, both bridged with LAN cable)
3 times Asus RT-N16 shelved
E4200 V1 running freshtomato 2020.8 (bridged with LAN cable)
3 times Linksys WRT610N V2 converted to E3000 and 1 original E3000 running freshtomato 2020.8 (bridged with LAN cable)
Joined: 26 Mar 2013 Posts: 1858 Location: Hung Hom, Hong Kong
Posted: Sat Apr 07, 2018 12:35 Post subject: DD-WRT BS build 35681 and Asus RT-N18U
Router/Version: Asus RT-N18U
Firmware: DD-WRT v3.0-r35681 std (04/06/18 )
Kernel: Linux 4.4.126 #2892 Fri Apr 6 09:37:05 CEST 2018 armv7l
Previous: DD-WRT v3.0-r35531 std (03/26/18 )
Mode/Status: Access Point (AP), Wired Working
Reset: NO reset during firmware upgrade
Issues/Errors:
1. syslog error messages:
Code:
root@RT-N18U:/tmp/var/log# grep -i err messages
Jan 1 00:00:13 RT-N18U kern.err kernel: bcmsflash: found no supported devices
Apr 7 12:28:07 RT-N18U daemon.err httpd[1094]: Request Error Code 404: File not found.
Apr 7 12:28:08 RT-N18U daemon.err httpd[1094]: Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases
Apr 7 12:28:14 RT-N18U daemon.err httpd[1094]: Request Error Code 404: File not found.
Apr 7 12:28:14 RT-N18U daemon.err httpd[1094]: Request Error Code 404: File not found.
Apr 7 12:28:25 RT-N18U daemon.err httpd[1094]: Request Error Code 404: File not found.
Miscellaneous:
- Router not using IPv6, VPN nor USB
- Router is NOT working 24/7
- LAN LED ... too lazy to check! Meow... >@.@<
- Wireless function is off for the meantime
Old problems:
a. DDNS (inadyn) crashed in build 31722
b. Testing port-forwarding via WAN IP from within LAN not working in builds 34411-34760. Needed external proxy server.
c. NTP client not working in builds 34886-34876,35034 (affecting process_monitor?)
d. The ping to www.google.com increased from 2ms to 13ms after setting a defunct
WINS server in Setup->Basic Setup->DHCP->WINS
a.7207168908.png
Description:
Speedtest.net result for Asus RT-N18U and DD-WRT BS build 35681
Filesize:
21.52 KB
Viewed:
11899 Time(s)
_________________ Router: Asus RT-N18U (rev. A1)
Drink, Blink, Stretch! Live long and prosper! May the Force and farces be with you!
Joined: 18 Jul 2017 Posts: 45 Location: Wisconsin, USA
Posted: Sat Apr 07, 2018 14:39 Post subject: No WiFi
Router/Version: Linksys EA6500 v1
Firmware:DD-WRT v3.0-r35681 giga ( 04/06/18 )
Kernel: Linux 3.10.108-dd #18532 Fri Apr 6 14:16:03 CEST 2018 mips
Previous: DD-WRT v3.0-r35531 giga ( 03/26/18 )
Mode/Status: Gateway/AP
Setup: Using IPv6 via DNSMasq, DDNS, & Port Range Forward.
Reset: No
Issues/Errors: No WiFi
Same issue persist from r35667 giga ( 04/04/18 )
Radios appear on but devices still don't see the network and refuse to connect.
Using DNSmasq with the following settings
dhcp-range=::1,::FFFF:FFFF:FFFF:FFFF,constructor:br0,slaac,1440
dhcp-option=option6:dns-server,[2001:4860:4860::8844],[2001:4860:4860::8888]
ra-param=*,60,1800
enable-ra
quiet-ra
quiet-dhcp
quiet-dhcp6
Router/Version: Buffalo WZR-1750DHP/DHPD Firmware: DD-WRT v3.0-r35681 std (04/06/18 Kernel: Linux 4.4.126 #2888 SMP Fri Apr 6 09:13:30 CEST 2018 armv7l Previous: BSr34760 Mode/Status: same as r35531 Reset: yes via webGUI and via telnet erase nvram Issues/Errors: DNSCrypt kills internet connection only if i use a resolver that is not IPV6, no overclocking support and NTP does not load only if i use a DNSCrypt resolver that is not IPV6
Upon reboot i saw these syslog messages
Jan 1 00:00:12 ThePort kern.info kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher <------ who is that guy?
in yellow
Jan 1 00:00:12 ThePort kern.warn kernel: PCI: Fixing up bus 0 domain 1
Jan 1 00:00:12 ThePort kern.warn kernel: PCI: Fixing up bus 1 domain 1
Jan 1 00:00:12 ThePort kern.warn kernel: PCI: Fixing up bus 0 domain 2
Jan 1 00:00:12 ThePort kern.warn kernel: pci 0002:01:00.0: can't set Max Payload Size to 512; if necessary, use "pci=pcie_bus_safe" and report a bug
Jan 1 00:00:12 ThePort kern.warn kernel: PCI: Fixing up bus 1 domain 2
Jan 1 00:00:12 ThePort kern.warn kernel: Boot partition size = 2097152(0x200000)
Jan 1 00:00:12 ThePort kern.warn kernel: mtd: partition "boot" extends beyond the end of device "bcmsflash" -- size truncated to 0x100000
Jan 1 00:00:12 ThePort kern.warn kernel: Found a Esmt NAND flash:
Jan 1 00:00:12 ThePort kern.warn kernel: Total size: 128MB
Jan 1 00:00:12 ThePort kern.warn kernel: Block size: 128KB
Jan 1 00:00:12 ThePort kern.warn kernel: Page Size: 2048B
Jan 1 00:00:12 ThePort kern.warn kernel: OOB Size: 64B
Jan 1 00:00:12 ThePort kern.warn kernel: Sector size: 512B
Jan 1 00:00:12 ThePort kern.warn kernel: Spare size: 16B
Jan 1 00:00:12 ThePort kern.warn kernel: ECC level: 8 (8-bit)
Jan 1 00:00:12 ThePort kern.warn kernel: Device ID: 0x92 0xf1 0x80 0x95 0x40 0x7f
Jan 1 00:00:12 ThePort kern.warn kernel: lookup_nflash_rootfs_offset: offset = 0x0 size = 0x2000000, 0x20000
Jan 1 00:00:12 ThePort kern.warn kernel: nf_conntrack_rtsp v0.7 loading
Jan 1 00:00:12 ThePort kern.warn kernel: Bad eraseblock 1023 at 0x000007fe0000
Jan 1 00:00:12 ThePort kern.warn kernel: Options: NO_SUBPAGE_WRITE,
Jan 1 00:00:12 ThePort kern.warn kernel: et: module license 'Proprietary' taints kernel.
Jan 1 00:00:12 ThePort kern.warn kernel: Disabling lock debugging due to kernel taint
Jan 1 00:00:12 ThePort kern.warn kernel: et_module_init: passivemode set to 0x0
Jan 1 00:00:12 ThePort kern.warn kernel: et_module_init: txworkq set to 0x0
Jan 1 00:00:12 ThePort kern.warn kernel: et_module_init: et_txq_thresh set to 0x400
Jan 1 00:00:12 ThePort kern.warn kernel: et_module_init: et_rxlazy_timeout set to 0x3e8
Jan 1 00:00:12 ThePort kern.warn kernel: et_module_init: et_rxlazy_framecnt set to 0x20
Jan 1 00:00:12 ThePort kern.warn kernel: et_module_init: et_rxlazy_dyn_thresh set to 0
Jan 1 00:00:12 ThePort kern.warn kernel: eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 7.14.89.21 (r524987)
Jan 1 00:00:12 ThePort kern.warn kernel: wl_module_init: passivemode set to 0x0
Jan 1 00:00:12 ThePort kern.warn kernel: wl_module_init: txworkq set to 0x0
Jan 1 00:00:12 ThePort kern.warn kernel: eth1: Broadcom BCM4360 802.11 Wireless Controller 7.14.89.21 (r524987)
Jan 1 00:00:12 ThePort kern.warn kernel: PCI: Enabling device 0002:01:00.0 (0140 -> 0142)
Jan 1 00:00:12 ThePort kern.warn kernel: eth2: Broadcom BCM4331 802.11 Wireless Controller 7.14.89.21 (r524987)
in red.....
Apr 7 18:16:29 ThePort user.debug : ttraff: data collection started
Apr 7 18:17:08 ThePort daemon.err httpd[2314]: Request Error Code 408: No request appeared within a reasonable time period.
Apr 7 18:17:22 ThePort daemon.err httpd[2314]: Request Error Code 408: No request appeared within a reasonable time period.
WIFI works on both the 2.4 & 5ghz without any issues. Keep at it devs.
EDIT: When i go to Setup--->Networking--->Port Setup, the MAC for Network Configuration eth0 is the same as Network Configuration vlan1 and the ROOT VLAN2 is the same as Network Configuration eth2
Posted: Sat Apr 07, 2018 21:01 Post subject: Re: No WiFi
wicket wrote:
Router/Version: Linksys EA6500 v1
Firmware:DD-WRT v3.0-r35681 giga ( 04/06/18 )
Kernel: Linux 3.10.108-dd #18532 Fri Apr 6 14:16:03 CEST 2018 mips
Previous: DD-WRT v3.0-r35531 giga ( 03/26/18 )
Mode/Status: Gateway/AP
Setup: Using IPv6 via DNSMasq, DDNS, & Port Range Forward.
Reset: No
Issues/Errors: No WiFi
Same issue persist from r35667 giga ( 04/04/18 )
Radios appear on but devices still don't see the network and refuse to connect.
Using DNSmasq with the following settings
dhcp-range=::1,::FFFF:FFFF:FFFF:FFFF,constructor:br0,slaac,1440
dhcp-option=option6:dns-server,[2001:4860:4860::8844],[2001:4860:4860::8888]
ra-param=*,60,1800
enable-ra
quiet-ra
quiet-dhcp
quiet-dhcp6
Same issues on Linksys 320N and Netgear 3700v3 and someone reported the Asus RT-AC66U has the same problem.
Radio is turned on and SSID broadcast enabled. No wifi devices will see it or connect to the wifi. Status lights look normal as usual.
Joined: 09 Nov 2014 Posts: 314 Location: Bakersfield, CA
Posted: Sat Apr 07, 2018 22:33 Post subject:
Tried loading this build on one of my my E3000 client bridges, and the internet/connection did not work. It would connect to the AP, then immediately drop the connection and repeat. So I rolled back and it works again.
I'd say this build is a dud. _________________ Deployed Routers:
Netgear R7800 - 1x build 46979
- Gateway (USB /w Entware, CAKE QoS)
Netgear R7000 - 3x build 46979
Joined: 26 Mar 2013 Posts: 1858 Location: Hung Hom, Hong Kong
Posted: Sun Apr 08, 2018 2:01 Post subject: Port forwarding bug:
Port forwarding bug:
Every time I tried to <Save> or <Apply Settings>, the Source Net column was auto-magically filled with a string "¸VÁv"! And there is nothing I could do to blank it!
update:
I gave up and rolled back to 35531! _________________ Router: Asus RT-N18U (rev. A1)
Drink, Blink, Stretch! Live long and prosper! May the Force and farces be with you!
Both this build, 04-06-2018-r35681, and 04-04-2018-r35667 on my ASUS N66U cause a partial loss of 2.4GHz. I'm setup as a repeater picking a 2.4GHz signal from an ATT wireless gateway. The weird thing is I'm still able to gain access to the web via the repeater bridge, but my rebroadcasted 2.4GHz network is a no-go.
Posted: Sun Apr 08, 2018 12:59 Post subject: Upgrade
Router/Version: Asus N66u
Firmware: 35681
Previous: 35667
Mode/Status: Gateway, DHCP, QoS, Wireless Off
Reset: No
Issues/Errors: None, so far. _________________ Before asking a question on the forums, update dd-wrt: Where do I download firmware? I suggest reading it all.
QCA Best WiFi Settings
Some dd-wrt wiki pages are up to date, others are not. PM me if you find an old one.
Atheros:
Netgear R7800 x3 - WDS AP / station, gateway, QoS
TP-Link Archer C7 v2 x2 - WDS Station
TP-Link TL-WDR3600 v1 - WDS Station
TP-Link 841nd v8 - NU
D-Link 615 C1/E3/I1 x 7 - 1 WDS station
D-Link 825 B1 - NU
D-Link 862L A1 x2 - WDS Station
Netgear WNDR3700v2 - NU
UBNT loco M2 x2 - airOS
Broadcom
Linksys EA6400 - Gateway, QoS
Asus N66U - AP
Netgear WNDR3700v3 - not used
MediaTek
UBNT EdgeRouter X - switch
Posted: Sun Apr 08, 2018 14:03 Post subject: Re: Upgrade
Router/Version: Asus RT-N10P
Firmware: 35681 mega and tried mini
Previous: 35531
Mode/Status: Client Bridge
Reset: Tried no reset and reset
Issues/Errors: The Power light and Wireless light off. Only light on ethernet connection.
Normally flash without a reset on these client bridges. This firmware as well as r35667 gave the same problem. No power or wifi lights. I had to push the reset button with a paperclip for a few seconds and I was able to get into Asus CFE miniWeb server and flash back to r35531.
Joined: 11 Aug 2017 Posts: 29 Location: edmonton, alberta, canadia!!
Posted: Sun Apr 08, 2018 16:23 Post subject:
Router/Version: Asus RT-N66U
Firmware: DD-WRT v3.0-r35681 (04/06/18)
Kernel: Linux DD-WRT 3.10.108-dd #18548 Fri Apr 6 14:37:24 CEST 2018 mips
Previous: DD-WRT v3.0-r33555 mega (10/20/17)
Mode/Status: Primary AP for cable modem on 2.4/5Ghz
Reset: telnet in, erase nvram, write dd-wrtxxxxxxx linux, erase nvram, reboot
Issues/Errors: no wifi whatsoever - neither the 2.4ghz nor 5ghz radios seem to be broadcasting or configurable for channel (Auto is the only option). just like the previous build from 04/04/2018, everything else seems to work great, except no wifi, which is kind of the point of my router so i rolled it back to my previous version which i know works (even if it's from last year before everyone got on the krack).
if the wifi worked, i suspect that this build would be really awesome - wired throughput speeds are running at the maximum (minus overhead or cable modem caps) and functionally it seems like the Save & Apply buttons works again/properly! i've given up on even trying to reset or flash through the webgui, mind you, it's been a waste of time for all the builds this year so i gave up on it entirely and keep a local copy of r33555 to revert (just in case the weirdest case scenario happens and i have no external routing without going to the basement to swap in another router). _________________ Primary Router for Residential 150Mbps/150Mbps Fiber:
*Asus RT-N66U: running DD-WRT v3.0-r37961 std (12/12/18)*