Joined: 26 Mar 2013 Posts: 1858 Location: Hung Hom, Hong Kong
Posted: Sun Apr 22, 2018 11:23 Post subject: Preliminary result of Asus RT-N18U and DD-WRT BS Build 35770
Router/Version: Asus RT-N18U
Firmware: DD-WRT v3.0-r35770 std (04/20/18 )
Kernel: Linux 4.4.128 #2965 Fri Apr 20 10:48:09 CEST 2018 armv7l
Previous: DD-WRT v3.0-r35767 std (04/19/18 )
Mode/Status: Access Point (AP), Wired Working
Reset: NO reset during firmware upgrade
Issues/Errors: no major problems, basic router
1. Running "cat /proc/mtd" in Administration -> Commands still didn't escape special characters properly:
Miscellaneous:
- Router not using IPv6, VPN nor USB
- Router is NOT working 24/7
- LAN LED ... too lazy to check! Meow... >@.@<
- WiFi broken in k3.x editions since build 35531?
Old problems:
a. DDNS (inadyn) crashed in build 31722
b. Testing port-forwarding via WAN IP from within LAN not working in builds 34411-34760. Needed external proxy server.
c. NTP client not working in builds 34886-34876,35034 (affecting process_monitor?)
d. The ping to www.google.com increased from 2ms to 13ms after setting a defunct
WINS server in Setup->Basic Setup->DHCP->WINS
e. The "Source Net" field in Port-Forwarding screen displayd blank field as "¸ÖÁv",
from builds 32667 to 32767. Possibly null-pointer assignment?
speedtest.dd-wrt.35770.asus.rt-n18u.jpg
Description:
speedtest.dd-wrt.35770.asus.rt-n18u - retested
Filesize:
9.2 KB
Viewed:
4948 Time(s)
_________________ Router: Asus RT-N18U (rev. A1)
Drink, Blink, Stretch! Live long and prosper! May the Force and farces be with you!
Joined: 26 Mar 2013 Posts: 1858 Location: Hung Hom, Hong Kong
Posted: Sun Apr 22, 2018 13:29 Post subject:
flood404 wrote:
Did you get the wifi to work or no by changing a WEBGUI setting?
The wifi is still broken for me.
My wifi settings are basically using default values (except SSID, WPA2 password, signal level, auto channel selection). Not a build ever affected the wifi of my RT-N18U so far. Note that my RT-N18U is using wireless mode AP, not Repeater nor Bridge. _________________ Router: Asus RT-N18U (rev. A1)
Drink, Blink, Stretch! Live long and prosper! May the Force and farces be with you!
Also, the date of build 35770 is Apr 20 not today Apr 22.
Yes, build 35767 is broken on many routers, so removed.
Even the build 35770 is still broken on many Atheros units. Broadcom units may work. _________________ ASUS GT-BE98 PRO Main: Fiber 5gbps up/down
ASUS AXE16000: AI Mesh node
2 X ASUS RT-AX89X: AI Mesh nodes
QNAP QSW-1208-8C 12-Port 10GbE Switch
XS712T ProSafe 12-Port 10GbE Switch
3 X R9000 DD-WRT Mesh
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r35770 std ( 04/20/18 )
Kernel: Linux 4.4.128 #2961 SMP Thu Apr 19 07:15:46 CEST 2018 armv7l
Previous: r35767
Mode/Status: Gateway / working
Reset: no
Issues/Errors: None so far, but the paint's still wet.
Uptime: 12m
Temperatures: CPU 61.4 °C / WL0 44.5 °C / WL1 48.3 °C
Router/Version: Asus RT-AC66U
Firmware: DD-WRT v3.0-r35770 std (04/20/18 )
Previous: DD-WRT v3.0-r35531 std (03/26/18 )
Mode/Status: Router, Wired Working
Reset: NO reset during firmware upgrade
Issues/Errors: Wi-Fi not seen by devices.
Same as 4/4/2018 r35667 release. _________________ It says Novice, but I've been using DD-WRT since at least 2004.
Also, the date of build 35770 is Apr 20 not today Apr 22.
Yes, build 35767 is broken on many routers, so removed.
Even the build 35770 is still broken on many Atheros units. Broadcom units may work.
The Netgear 3700v3 is broadcom and Wifi does not work with the last 3 builds. The SSID shows up for a minute then its gone. Nothing can't connect to it and it is in AP mode.
Router/Version: Buffalo WZR-1750DHP/DHPD Firmware: DD-WRT v3.0-r35770 std (04/20/18 Kernel: Linux 4.4.128 #2961 SMP Thu Apr 19 07:15:46 CEST 2018 armv7l Previous: BSr34760 Mode/Status: same as r35531-r35681 CPU overclocked to 1200mhz from default 800mhz Reset: yes via webGUI and via telnet erase nvram Issues/Errors: DNSCrypt kills internet connection only if i use a resolver that is not IPV6, no overclocking support and NTP does not load only if i use a DNSCrypt resolver that is not IPV6, unit must be power cycled after flash or the Buffalo logo would blink 3 times every ten seconds or so indicating bad/corrupt flash