Posted: Sun May 06, 2018 15:43 Post subject: in my EA2700 case
mwchang wrote:
parco wrote:
when will they really repair the main problems?
I have seen people complaining about the 5GHz wireless LAN.... maybe this is the priority as those routers are more expensive.
I'm using Linksys EA2700, since the r33607 last year, my Wifi connections always disconnect suddenly and intermittently. But no wifi disconnections shown in my phone, it shows that connection is always on, but the TCP and UDP connections of apps and programs always hang, hang around several minutes each time, jam and no responses from my EA2700. And I don't know why, just IPv4 connections and 2.4GHz, but everything alright in wired connections.
From r35667, every build from April of this year, My EA2700 even never broadcast any SSID, so none of my mobile devices or Laptops could find this router AP, my EA2700 is not existed for them, let alone talking about "can connect my router or not".......
Joined: 30 Jan 2015 Posts: 676 Location: Texas, USA
Posted: Sun May 06, 2018 17:43 Post subject:
zerophase wrote:
Router/Version: Asus AC5300 Firmware: 35874 Kernel: Not Sure Reset?/Mode: Had to enter recovery mode Issues/Errors: Router locked up and I need to flash back to 35831 with the asus firmware restoration tool
Filed a new ticket:
http://svn.dd-wrt.com/ticket/6296 _________________ ASUS GT-BE98 PRO Main: Fiber 5gbps up/down
ASUS AXE16000: AI Mesh node
2 X ASUS RT-AX89X: AI Mesh nodes
QNAP QSW-1208-8C 12-Port 10GbE Switch
XS712T ProSafe 12-Port 10GbE Switch
3 X R9000 DD-WRT Mesh
Joined: 18 Jul 2017 Posts: 45 Location: Wisconsin, USA
Posted: Sun May 06, 2018 22:02 Post subject: Still No Good
Router/Version: Linksys EA6500 v1
Firmware:DD-WRT v3.0-r35874 giga ( 05/04/18 )
Kernel: Linux 3.10.108-dd #18982 Fri May 4 12:00:20 CEST 2018 mips
Previous: DD-WRT v3.0-r35531 giga ( 03/26/18 )
Mode/Status: Gateway/AP
Setup: Using IPv6 via DNSMasq, DDNS, & Port Range Forward.
Reset: No
Issues/Errors: No WiFi
Same issue still persist that first occurred in r35667 ( 04/04/18 )
Radios appear on but devices still don't see the network and refuse to connect. Rolling back to DD-WRT v3.0-r35531 giga ( 03/26/18 ) for a fourth time. _________________
Posted: Mon May 07, 2018 1:58 Post subject: Still Bad
Router/Version: Linksys WRT1200AC (v2)
Firmware: DD-WRT v3.0-r35874
Previous version: r35681
Reset: No
Mode: Gateway DHCP
Issues/Errors: Does not connect to the internet. Red messages in Syslog:
Dec 31 16:01:09 WRT1200AC user.err : Caught SIGSEGV (11) in strlen
Dec 31 16:01:09 WRT1200AC user.err : Fault at memory location 0x00000000 due to address not mapped to object (1).
Dec 31 16:01:09 WRT1200AC user.err : Thread 1595: udhcpc
Dec 31 16:01:09 WRT1200AC user.err : === Context:
Dec 31 16:01:09 WRT1200AC user.err : TRAPNO:0000000e ERRCODE:00000017 OLDMASK:00000000 R0:00000000
Dec 31 16:01:09 WRT1200AC user.err : R1:00000000 R2:b6fdb3c0 R3:00000000 R4:fefefeff
Posted: Mon May 07, 2018 4:32 Post subject: Re: Still No Good
wicket wrote:
Router/Version: Linksys EA6500 v1
Firmware:DD-WRT v3.0-r35874 giga ( 05/04/18 )
Kernel: Linux 3.10.108-dd #18982 Fri May 4 12:00:20 CEST 2018 mips
Previous: DD-WRT v3.0-r35531 giga ( 03/26/18 )
Mode/Status: Gateway/AP
Setup: Using IPv6 via DNSMasq, DDNS, & Port Range Forward.
Reset: No
Issues/Errors: No WiFi
Same issue still persist that first occurred in r35667 ( 04/04/18 )
Radios appear on but devices still don't see the network and refuse to connect. Rolling back to DD-WRT v3.0-r35531 giga ( 03/26/18 ) for a fourth time.
Posted: Mon May 07, 2018 13:42 Post subject: Re: Still No Good
wicket wrote:
Router/Version: Linksys EA6500 v1
Firmware:DD-WRT v3.0-r35874 giga ( 05/04/18 )
Kernel: Linux 3.10.108-dd #18982 Fri May 4 12:00:20 CEST 2018 mips
Previous: DD-WRT v3.0-r35531 giga ( 03/26/18 )
Mode/Status: Gateway/AP
Setup: Using IPv6 via DNSMasq, DDNS, & Port Range Forward.
Reset: No
Issues/Errors: No WiFi
Same issue still persist that first occurred in r35667 ( 04/04/18 )
Radios appear on but devices still don't see the network and refuse to connect. Rolling back to DD-WRT v3.0-r35531 giga ( 03/26/18 ) for a fourth time.
Tested on EA6500V2 got same result, but something funny happened:
If I disabled the WAN port and reboot the router, Both Wi-Fi back to work again.
Looks like you can only use this firmware as internal AP.
Joined: 26 Mar 2013 Posts: 1858 Location: Hung Hom, Hong Kong
Posted: Wed May 09, 2018 3:34 Post subject: Re: Re: WAN+Wifi Still No Good?
watchsat wrote:
Yes, the one with WAN port enabled do have port-forwarding on it, and all the 'Source IP' fields are empty.
Does that is the reason cause the Wi-Fi not working?
It could render the WAN inaccessible. A simple test is to change all blank "Source Net" field to "0.0.0.0/0", Save, Apply. If that enabled gave back internet (e.g. ping 8.8.8.8), then it's the bug.
Build 35898 has fixed this bug. _________________ Router: Asus RT-N18U (rev. A1)
Drink, Blink, Stretch! Live long and prosper! May the Force and farces be with you!