[T_o_m]

Router/Version: Netgear R6400 v2
Firmware: DD-WRT v3.0-r54682 std (01/02/24)
Kernel: Linux 4.4.302-st47 #10788 SMP Mon Jan 1 10:05:50 +06 2024 armv7l
Previous/Reset: 54604 no
Mode: 1. Gateway, 2.Wireless access point
Issues/Errors: No not this time

[mflorezm]

Hi Guys:

Router/Version: Netgear R8500 with DD-WRT v3.0-r54682 std (01/02/24) / Linux 4.4.302-st47
Update method: WebUpgrade
Previous/Reset: r51275 / yes (so, I lost wifi)
Issues/Errors: No wifi if reset to defaults (still there).
Using: OVPN server, Vlan's, Wifi Radios, USB, SAMBA NAS, SSH and port forwarding.

The wifi radio problem is very old on R8500, so, i have to come back to old r38581 to reactivate wifi radios then reflash r54682 without reset to defaults.

Great job, thanks.

MFM

Netgear R8500 DD-WRT v3.0-r54682 std (01/02/24)
Linksys EA8500 DD-WRT v3.0-r53562 std (10/03/23)
Buffalo WZR-1750DHP DD-WRT v3.0-r35831 std (04/26/1

[rkboni]

Router/Version: TP-Link Archer C9 v1
Update Method: Web upgrade
File/Kernel: Linux 4.4.302-st47 #10790 SMP Tue Jan 2 04:04:33 +06 2024 armv7l
Previous/Reset: DD-WRT v3.0-r54420 std (12/04/23) / no
Mode/Status: Access point (2.4 + 5, IoT VAP), VLAN router, no DHCP/DNS
Issues/Errors: None, up 20 mins.

After seeing the comment in the r54604 build thread about the Archer cv9 v1 failing, thought I would update this AP before trying the primary router/gateway which does DHCP/DNS/WG/... so far it looks good here, but will report if I start seeing issues.

[mwchang]

ksmbd is also working fine in this build.

[umggc]

Router/Version: Linksys EA6500 v1
File/Kernel: DD-WRT v3.0-r54682 giga / Linux 4.4.302-st47 #27827
Previous/Reset: 53633 / No
Mode/Status: AP
Issues/Errors: None

[mwchang]

Router/Version: Asus RT-N18U (rev. A1)
Firmware: DD-WRT v3.0-r54682 std (01/02/24)
Kernel: Linux rt-n18u-hst 4.4.302-st47 #10792 Tue Jan 2 04:18:45 +06 2024 armv7l DD-WRT
Previous: DD-WRT v3.0-r54905 std (01/12/24)
Mode: WAN @ DHCP, Wireless @ AP (Mixed)
Status: Working {
  Not 24/7; Not using CTF, FA, STP, IPv6, VPN, VAP;
  USB storage(/jffs, /opt); NAS (ksmbd, lighttpd);
  Cron enabled(default jobs deleted);
  WAN DNS disabled; DDNS (no-ip.com) In-a-Dyn OK;
  DNSmasq not serving DNS; Recursive DNS Unbound (/jffs/etc/unbound.conf);
  Entware core (CPU: armv71) installed without problem;
  Swap partition (USB) enabled for using GitHub
}
Reset: NO RESET (using command not WEBUI to flash; httpd disabled)
File: https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2024/01-02-2024-r54682/asus-rt-n18u/

Summary

Because of solely ksmbd problem of build 54905, I came back to this build. Nothing strange so far, both after firmware reboot and cold boot.

[mwchang]

New discoveries:

• Startup (rc_startup) Script stalled and did NOT finish execution
  

  Code:

  # ps | grep start  2358 root     startservice_f modules_wait  2359 root     /sbin/service modules_wait start  2431 root     {.rc_startup} /bin/sh /tmp/.rc_startup  2563 root     logger -s -t [2431]: exiting /tmp/.rc_startup

  
  
• mstpd was started even though Spanning Tree was disabled in WEBUI
  

  Code:

  # nvram show | grep stp size: 23901 bytes (41635 left) lan_stp=0 # ps | grep mst   655 root     /sbin/mstpd  4610 root     grep mst

  
  
• Every time Unbound was started, a new entry of "ramfs on /etc/unbound type ramfs (rw,relatime)" was added. Stopping Unbound would NOT remove old entries.