Enrico you are right!!!
When using external Antenna and setting in dd-wrt to External you will get a really bad SNR in the AP.
EOC showing nice SNR but the AP showing really low SNR.
Looks like you still have to use the Internal setting in DD-wrt and just switching the Main-Switch on the EOC to EXT.
We will have to wait for a fix.
Might have been working in 03/03/09
After flashing, you might want to try this:
(only working from 03/25/09 on)
TX-Power: 30
Antenna Gain: -10
YES! -10
See what happens. You should earn some more SNR.
This is why the original Firmware was so good.
This gets about 24db plus Antenna Gain out of your 1650! Please be aware of the regulations in your Country!
If set internal in Antenna output i see good wireless performance (tomorrow some test).
the problem is why thereis "antenna output" on eoc-1650 version of dd-wrt?
i can select two antennas only via switch present on device
when is set on internal.
i mounted on my roof to do some testing and found some sw/ant problems. i spoke to BS and to the lack of hw information he must mail to senao. so this will take some time. _________________ Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
Last edited by Sash on Thu Mar 26, 2009 21:57; edited 1 time in total
@Enrico
Do you have the 25/03 from the Morning or Evening?
PLEASE be aware that you can NOT flash the 25/03 from the Morning with a new Firmware using the Web-IF.
See my Post above. Fixed in the Evening.
Are you able to choose Internal/External in DD-WRT or is there nothing to choos from now?
@SASH
What are those Problems you are experiencing?
Lates Firmware? 03/26/09?