DD-WRT :: View topic - New Asus RT-G32 (H/W B1) with Ralink hardware

New Asus RT-G32 (H/W B1) with Ralink hardware

DD-WRT Forum Index -> Ralink SoC based Hardware

Goto page Previous 1, 2, 3, 4 Next

View previous topic :: View next topic

Author

Message

majinvegeta
DD-WRT Novice

Joined: 15 Apr 2010
Posts: 8

Posted: Sat Apr 17, 2010 16:33 Post subject:

DoesItMatter wrote:

There are also 2 revisions of the DIR-300

The DIR-300 Rev A is Atheros Based

The DIR-300 Rev B is RaLink Based

You have to see which one you have and flash the correct firmware for it.

Yes, i've B version. it seems to be not hard to flash. Smile

Sponsor

mcc253
DD-WRT Novice

Joined: 03 Apr 2010
Posts: 14

Posted: Sat Apr 17, 2010 16:38 Post subject:
Hi, Not hard to flash? But for revison B it's impossible for now to flash with DD-WRT. That's why I posted here serial logs and photos of the board...to developers try to adapt a Ralink version for this type of flash / memory. Regards

Jorge Silva
DD-WRT User

Joined: 29 Jan 2010
Posts: 113
Location: Aveiro, Portugal

Posted: Sat Apr 17, 2010 17:53 Post subject:
They are talking about D-Link Routers, not about RT-G32b1, my friend.... Best Regards, Jorge Silva _________________ »»» Marooned »»» by Pink Floyd

hellcry
DD-WRT Novice

Joined: 01 May 2010
Posts: 2

Posted: Sat May 01, 2010 20:46 Post subject: Asus RT-G32 (H/W B1)
I also cant w8 for Asus RT-G32 (H/W B1) firmware to come out wanna flash my new router.

smooth_penguin
DD-WRT Novice

Joined: 18 May 2010
Posts: 2

Posted: Tue May 18, 2010 4:01 Post subject: Seeing the bootloader message, but cant ^C

Hi, I have an Asus RT-G32, The firmware on the device is 3.0.1.15, I think its ralink based and the B1 rev since its power supply is 12V 1A - as mentioned at www.dd-wrt.com/wiki/index.php/Supported_Devices. I do get the bootloader prompt

== Executing boot script in 1.920 seconds - enter ^C to abort

but hitting CTRL+C doesnt work, have tried a lot from different terminals - xterm, putty, cmd. So is this redboot? - do you guys get a prompt?

LOM
DD-WRT Guru

Joined: 28 Dec 2008
Posts: 7647

Posted: Tue May 18, 2010 4:19 Post subject: Re: Seeing the bootloader message, but cant ^C

smooth_penguin wrote:

So is this redboot?

You would have known if you had bothered to read this thread. It is only 3 pages long so no excuse for not reading.
_________________
Kernel panic: Aiee, killing interrupt handler!

smooth_penguin
DD-WRT Novice

Joined: 18 May 2010
Posts: 2

Posted: Tue May 18, 2010 5:24 Post subject:
Hey, I have read the thread earlier - no one mentioned anything about seeing the bootloader message on the Rev B router hence my question.

LOM
DD-WRT Guru

Joined: 28 Dec 2008
Posts: 7647

Posted: Tue May 18, 2010 6:12 Post subject:

smooth_penguin wrote:

Hey, I have read the thread earlier - no one mentioned anything about seeing the bootloader message on the Rev B router hence my question.

???

This thread is only about rev B of the RT-G32, go read page 2 of it again.
Read it carefully. Don't skim.
_________________
Kernel panic: Aiee, killing interrupt handler!

thieringpeti
DD-WRT Novice

Joined: 28 May 2010
Posts: 4

Posted: Fri May 28, 2010 21:37 Post subject:

I'm just trying to get DD-WRT on this router. I've tried some firmwares with automatic ramsize detection, found here: http://www.dd-wrt.com/forum/viewtopic.php?t=54802&postdays=0&postorder=asc&start=15
Uploaded with serial & tftp with success.

it boots up, but stops with kernel panic. I need a firmware for Ralink, 16MB RAM.

Code:

U-Boot 1.1.3 (Nov 12 2009 - 00:08:59)
Board: Ralink APSoC DRAM: 16 MB
relocate_code Pointer at: 80fb4000
spi_wait_nsec: 3e
spi deice id: c2 20 16 c2 20 (2016c220)
find flash: mx25l3205d
raspi_read: from:30000 len:1000
*** Warning - bad CRC, using default environment
============================================
Ralink UBoot Version: 3.3
--------------------------------------------
ASIC 3052_MP2 (Port5<->None)
DRAM component: 128 Mbits SDR
DRAM bus: 16 bit
Total memory: 16 MBytes
Flash component: SPI Flash
Date:Nov 12 2009 Time:00:08:59
============================================
icache: sets:256, ways:4, linesz:32 ,total:32768
dcache: sets:128, ways:4, linesz:32 ,total:16384
##### The CPU freq = 320 MHZ ####
SDRAM bus set to 16 bit
SDRAM size =16 Mbytes
GPIO 10 not detect
Please choose the operation:
1: Load system code to SDRAM via TFTP.
2: Load system code then write to Flash via TFTP.
3: Boot system code via Flash (default).
4: Entr boot command line interface.
9: Load Boot Loader code then write to Flash via TFTP.
0

3: System Boot system code via Flash.
## Booting image at bf050000 ...
raspi_read: from:50000 len:40
Image Name: DD-WRT v24 Linux Kernel Image
Created: 2009-07-18 18:2x Kernel Image (lzma compressed)
Data Size: 856958 Bytes = 836.9 kB
Load Address: 80000000
Entry Point: 80267000
raspi_read: from:50040 len:d137e
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80267000) ...
## Giving linux memsize in MB, 16
Starting kernel ...

LINUX started...
THIS IS ASIC
Linux version 2.6.23.17 (root@dd-wrt) (gcc version 4.1.2) #572 Sat Jul 18 20:20:
57 CEST 2009
The CPU frequency set to 320 MHz
16M RAM Detected!
CPU revision is: 0001964c
Determined physical RAM map:
memory: 01000000 @ 00000000 (usable)
Built 1 zonelists in Zone order. Total pages: 4064
Kernel command line: console=ttyS1,57600n8 root=/dev/mtdblock4 rootfstype=squash
fs noinitrd
Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.
Primary data cache 16kB, 4-way, linesize 32 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
Cache parity protection disabled
cause = 10800000, status = 1100ff00
PID hash table entries: 64 (order: 6, 256 bytes)
calculating r4koff... 0030d400(3200000)
CPU frequency 320.00 MHz
Using 160.000 MHz high precision timer.
console [ttyS1] enabled
Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
Memory: 13260k/16384k available (2141k kernel code, 3124k reserved, 315k data, 1
20k init, 0k highmem)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
Generic PHY: Registered new driver
NET: Registered protocol family 2
Time: MIPS clocksource has been installed.
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 512 (order: 0, 4096 bytes)
TCP bind hash table entries: 512 (order: -1, 2048 bytes)
TCP: Hash tables configured (established 512 bind 512)
TCP reno registered
Load RT2880 Timer Module(Wdg/Soft)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
squashfs: version 3.0 (2006/03/15) Phillip Lougher
io scheduler noop registered
io scheduler deadline registered (default)
Ralink gpio driver initialized
Serial: 8250/16550 driver $Revision: 1.3 $ 2 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0xb0000500 (irq = 37) is a 16550A
serial8250: ttyS1 at I/O 0xb0000c00 (irq = 12) is a 16550A
PPP gregistered
PPP BSD Compression module registered
MPPE/MPPC encryption/compression module registered
NET: Registered protocol family 24
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
ralink flash device: 0x800000 at 0xbf000000
Error: 0 flash device was found
u32 classifier
Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
ctnetlink v0.93: registering with nfnetlink.
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
IPP2P v0.8.2 loading
ClusterIP Version 0.8 loaded successfully
TCP bic registered
TCP cubic registered
TCP westwood registered
TCP highspeed registered
TCP hybla registered
TCP htcp registered
TCP vegas registered
TCP scalable registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Welcome to PF_RING 3.2.1
(C) 2004-06 L.Deri <deri@ntop.org>
NET: Registered protocol family 27
PF_RING: bucket length 128 bytes
PF_RING: ring slots 4096
PF_RING: sample rate 1 [1=no sampling]
PF_RING: capture TX No [RX only]
PF_RING: transparent mode Yes
PF_RING initialized correctly.
PF_RING: registered /proc/net/pf_ring/
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
GDMA1_MAC_ADRH -- : 0x00000000
GDMA1_MAC_ADRL -- : 0x00000000
Ralink APSoC Ethernet Driver Initilization. v2.00 256 rx/tx descriptors allocat
ed, mtu = 1500!
NAPI enable, weight = 0, Tx Ring = 256, Rx Ring = 256
GDMA1_MAC_ADRH -- : 0x00000000
GDMA1_MAC_ADRL -- : 0xabab0000
PROC INIT OK!
Unhandled kernel unaligned access[#1]:
Cpu 0
$ 0 : 00000000 00000000 ffffffed 00000000
$ 4 : 80258d70 ffffffed 802e9000 00007f3f
$ 8 : b01100c8 b0110014 b0110050 b0110090
$12 : b0110098 b01100cc b011009c b011008c
$16 : 8023335c 00000000 00000020 802d0000
$20 : 0000ffff 80230000 00000000 00000000
$24 : 00000000 0098963a
$28 : 80324000 80325f28 80280000 80279f30
Hi : 0000006a
Lo : 7efe4000
epc : 80279f3c Not tainted
ra : 80279f30 Status: 1100fc03 KERNEL EXL IE
Cause : 00800010
BadVA : 00000009
PrId : 0001964c
Modules linked in:
Process swapper (pid: 1, threadinfo=80324000, task=80323878)
Stack : 803e0000 00000000 80279590 80279588 00000000 00000000 00000000 80282834
00000000 80280000 8026783c 8026783c 00000000 8026777c 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 80003c54
...
Call Trace:[<80279590>][<80279588>][<8026783c>][<8026783c>][<8026777c>][<80003c5
4>][<80003c44>]
Code: 00402821 10400014 ae62e000 <8c42001c> 02002021 90430000 90810000 2442
0001 14230004
Kernel panic - not syncing: Attempted to kill init!
Rebooting in 1 seconds..

[/code]

thieringpeti
DD-WRT Novice

Joined: 28 May 2010
Posts: 4

Posted: Fri May 28, 2010 22:00 Post subject:

printenv (menu #4) output is:

Code:

4: System Enter Boot Command Line Interface.
U-Boot 1.1.3 (Nov 12 2009 - 00:08:59)
RT3052 # pprriinntteennvv

bootcmd=tftp
bootdelay=2
baudrate=57600
ethaddr="00:AA:BB:CC:DD:10"
ipaddr=10.10.10.123
serverip=10.10.10.3
ramargs=setenv bootargs root=/dev/ram rw
addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):$(gatewayip):$(netmas
k):$(hostname):$(netdev):off
addmisc=setenv bootargs $(bootargs) console=ttyS0,$(baudrate) ethaddr=$(ethaddr)
panic=1
flash_self=run ramargs addip addmisc;bootm $(kernel_addr) $(ramdisk_addr)
kernel_addr=BFC40000
u-boot=u-boot.bin
load=tftp 8A100000 $(u-boot)
u_b=protect off 1:0-1;era 1:0-1;cp.b 8A100000 BC400000 $(filesize)
loadfs=tftp 8A100000 root.cramfs
u_fs=era bc540000 bc83ffff;cp.b 8A100000 BC540000 $(filesize)
test_tftp=tftp 8A100000 root.cramfs;run test_tftp
stdin=serial
stdout=serial
stderr=serial
ethact=Eth0 (10/100-M)
Environment size: 765/4092 bytes
RT3052 #

[/code]

thieringpeti
DD-WRT Novice

Joined: 28 May 2010
Posts: 4

Posted: Fri May 28, 2010 22:08 Post subject:
Image of the router I've got

thieringpeti
DD-WRT Novice

Joined: 28 May 2010
Posts: 4

Posted: Sat May 29, 2010 7:31 Post subject:

I've tried almost all the flash images found in the router database, for Ralink 3052 chip & 16MB RAM. All of them produce the same kernel error. I think this router has a different memory mapping than others.
I've spent more attention on that Sitecom router in the other topic. I've read that it has also 16MB RAM and a similar RaLink chip.

Because this router is very-very cheap (approx. 25-30 euros) I think it will be popular also for DD-WRT.

biomecanoid
DD-WRT Novice

Joined: 23 Sep 2010
Posts: 19

Posted: Thu Sep 23, 2010 11:26 Post subject: Asus RT-G32 (H/W B1)

Hi,

I have the Asus RT-G32 (H/W B1) too i bought it thinking its H/W A is there any way to install DD-WRT on it ? i have tried installing via tftp via redboot and via the webgui nothing worked, as far as i have read here it is not possible yet. I am wondering will it be possible in the future ? or this device has no luck with wrt ?. Is there any way i can contribute to the effort of modding wrt to suit the asus by pics of the device screenshots of the webgui menus or any other way let me know.

Thanks

heimer61
DD-WRT Novice

Joined: 24 Sep 2010
Posts: 5

Posted: Fri Nov 05, 2010 17:33 Post subject:
Any news for this device?

Asus_Owner
DD-WRT Novice

Joined: 15 Nov 2010
Posts: 1

Posted: Mon Nov 15, 2010 12:47 Post subject: Still no news?
Another owner of the Asus RT-G32 rev.B1 here. Is there any update? is something in the works? or is this router never going to be supported? Can we help in any way? is there something you require? (photos,etc?)

Goto page Previous 1, 2, 3, 4 Next

Display posts from previous:

Page 3 of 4

DD-WRT Forum Index -> Ralink SoC based Hardware

All times are GMT

Navigation

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Log in

New Asus RT-G32 (H/W B1) with Ralink hardware

Quick Links

Log in