Author
Message
redhawk0 DD-WRT Guru Joined: 04 Jan 2007 Posts: 11563 Location: Wherever the wind blows- North America
Back to top
Sponsor
RCShadows DD-WRT User Joined: 17 Aug 2008 Posts: 437
Posted: Thu Oct 07, 2010 16:23 Post subject:
Red,
Is there any way the download page can show the complete name? I hope the reason I ask is obvious enough.
I had to go through several clicks to save before finding what I needed. Course, I could be doing something wrong and need a tip or something.
Thanks.
Back to top
kt_haddock DD-WRT Guru Joined: 25 Dec 2009 Posts: 710
Back to top
redhawk0 DD-WRT Guru Joined: 04 Jan 2007 Posts: 11563 Location: Wherever the wind blows- North America
Posted: Thu Oct 07, 2010 16:27 Post subject:
RCShadows wrote: Red,
Is there any way the download page can show the complete name? I hope the reason I ask is obvious enough.
I had to go through several clicks to save before finding what I needed. Course, I could be doing something wrong and need a tip or something.
Thanks.
Not that I am aware of....I put my mouse over the filename...and then the fullname shows up at the bottom of my browser. (before clicking on it)
Of course...you have to have the Status Bar selected in your browser.
redhawk _________________ The only stupid question....is the unasked one.
Back to top
redhawk0 DD-WRT Guru Joined: 04 Jan 2007 Posts: 11563 Location: Wherever the wind blows- North America
Posted: Thu Oct 07, 2010 16:30 Post subject:
Or this way. :lol:
redhawk _________________ The only stupid question....is the unasked one.
Back to top
redhawk0 DD-WRT Guru Joined: 04 Jan 2007 Posts: 11563 Location: Wherever the wind blows- North America
Posted: Thu Oct 07, 2010 16:33 Post subject:
DO NOT PUT THIS BUILD ON THE ASUS WL-500W
Bricked.....like the 15362 builds.
redhawk _________________ The only stupid question....is the unasked one.
Back to top
Turbe DD-WRT User Joined: 15 Apr 2008 Posts: 87
Posted: Thu Oct 07, 2010 16:35 Post subject:
No dd-wrt.v24-15396_NEWD-2_K2.6_mega-e2k-e3k.bin ??? :(
I have a E3000 on the way from the Cisco Home Store (refurb)... I like to run the Mega versions..
From my understanding, I can't run the standard Mega (without e2K-e3k) on a E3000, is that correct? _________________
1 x E3000 - 15962 Big (K2.6) - wl0 NG-Mixed, wl1 N-Only (5GHz) - WDS 5GHz - WAN Gateway
1 x WRT610N v1/.16 - Eko 15337 Mega (K2.6) - wl0 NG-Mixed, wl1 N-Only (5GHz) - WDS 5GHz
1 x WRT610N v1/.16 - Eko 15337 Mega (K2.6) - wl0 NG-Mixed, wl1 N-Only (5GHz) - WDS 5GHz
1 x WRT610N v1/.16 - Eko 15337 Mega (K2.6) - wl0 NG-Mixed, wl1 N-Only (5GHz) - WDS 2.4GHz
1 x WRTSL54GS - Thibor - Retired
WRT610N (Never had to use)
1 x WRT54GS v3 - 13064 Std - Client Bridge 2.4GHz
1 x WRT54GS v3 - Thibor - Retired
Back to top
Eko DD-WRT Developer/Maintainer Joined: 07 Jun 2006 Posts: 5771
Posted: Thu Oct 07, 2010 16:40 Post subject:
Turbe wrote: No dd-wrt.v24-15396_NEWD-2_K2.6_mega-e2k-e3k.bin ??? :(
I have a E3000 on the way from the Cisco Home Store (refurb)... I like to run the Mega versions..
From my understanding, I can't run the standard Mega (without e2K-e3k) on a E3000, is that correct?
Ahh.. I forgot to make mega-e2k-e3k... use big for now and i'll do mega later today.
Back to top
stalonge DD-WRT Guru Joined: 21 Jul 2006 Posts: 1898 Location: Fortaleza Ce Brazil
Posted: Thu Oct 07, 2010 16:43 Post subject:
Big working in my WRT610 Nv2 ..
3g working too ...
no problems so far
_________________ DDwrt ...it rocks ....
1 R7800 54420 AP Wireguard webserver JFFS SAMBA FTP usb HD Mesh
1 R7800 54420 Cli Mesh
1 WZR1750 54389 AP Webserver Samba Wireguard
1 TP link Archer C7v5 54420 Cli Mesh
1 DD x86_64 48296 Gateway Samba Ftp Webserver
Back to top
redhawk0 DD-WRT Guru Joined: 04 Jan 2007 Posts: 11563 Location: Wherever the wind blows- North America
Posted: Thu Oct 07, 2010 17:03 Post subject:
Eko...I sent you Serial data from the WL-500W after loading this build of big
redhawk _________________ The only stupid question....is the unasked one.
Back to top
RCShadows DD-WRT User Joined: 17 Aug 2008 Posts: 437
Posted: Thu Oct 07, 2010 17:09 Post subject:
redhawk0 wrote:
Or this way. :lol:
redhawk
Thanks guys! DUH! on looking at the address at the bottom. I'm an IT guy too, go figure. That's what 5 hours of sleep buys you lol.
Thanks again.
Back to top
SpyrosB DD-WRT User Joined: 12 Apr 2010 Posts: 136 Location: Greece
Posted: Thu Oct 07, 2010 18:14 Post subject:
Can anyone check if QoS is applied correctly?
Im getting this after reboot
Quote: root@DD-WRT:~# /usr/sbin/svqos status ppp0 0
qdisc htb 1: root r2q 10 default 30 direct_packets_stat 310
Sent 18087 bytes 310 pkt (dropped 0, overlimits 0 requeues 0)
rate 0bit 0pps backlog 0b 0p requeues 0
class htb 1:100 parent 1:1 prio 2 rate 100000Kbit ceil 100000Kbit burst 1000Kb cburst 126587b
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
rate 0bit 0pps backlog 0b 0p requeues 0
lended: 0 borrowed: 0 giants: 0
tokens: 80000 ctokens: 9890
class htb 1:1 root rate 100000Kbit ceil 100000Kbit burst 1000Kb cburst 126587b
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
rate 0bit 0pps backlog 0b 0p requeues 0
lended: 0 borrowed: 0 giants: 0
tokens: 80000 ctokens: 9890
or sometimes this
Quote: root@DD-WRT:~# /usr/sbin/svqos status ppp0 0
qdisc htb 1: root r2q 10 default 30 direct_packets_stat 10
Sent 805 bytes 10 pkt (dropped 0, overlimits 0 requeues 0)
rate 0bit 0pps backlog 0b 0p requeues 0
i rebooted several times and i removed all custom script (frater's adblock, .startup and .wanup for modem access, custom firewall) but still the same
Router WRT320N converted to E2000 _________________ WRT320N converted to E2000 : DD-WRT v24-sp2 (11/21/10) std-usb-nas - build 15778
Back to top
brackb01 DD-WRT Novice Joined: 18 Jun 2010 Posts: 44 Location: UK
Posted: Thu Oct 07, 2010 18:32 Post subject:
Hi
is there anywhere that lists what is in the new build? I'm currently on 15230M on a wrt610n V2.
Thanks
Back to top
SpyrosB DD-WRT User Joined: 12 Apr 2010 Posts: 136 Location: Greece
Posted: Thu Oct 07, 2010 18:35 Post subject:
brackb01 wrote: Hi
is there anywhere that lists what is in the new build? I'm currently on 15230M on a wrt610n V2.
Thanks
http://svn.dd-wrt.com:8000/dd-wrt/timeline _________________ WRT320N converted to E2000 : DD-WRT v24-sp2 (11/21/10) std-usb-nas - build 15778
Back to top
kt_haddock DD-WRT Guru Joined: 25 Dec 2009 Posts: 710
Posted: Thu Oct 07, 2010 18:36 Post subject:
brackb01 wrote: Hi
is there anywhere that lists what is in the new build? I'm currently on 15230M on a wrt610n V2.
Thanks
You can look in timeline and se what have been fixed. http://svn.dd-wrt.com:8000/dd-wrt/timeline
Ops: 2:nd place _________________ [I prefer answere in whole sentence]
Back to top