Posted: Sat Nov 06, 2010 12:52 Post subject: Bricked WRT320N
Hi!
I have a problem with my Linksys WRT320N.
First of all I'd like to say that I had no problems with it until today. It had an uptime of about a week and I had no problems with it what-so-ever.
Okay!
The router ran the following firmware:
"dd-wrt.v24-15508_NEWD-2_K2.6_mini_wrt320n.bin"
I upgraded to that version from:
dd-wrt.v24-13493_NEWD-2_K2.6_mini_wrt320n.bin
The problem is that the power-light is constantly flashing and I can't connect to the router at all.
First I tried the 30-30-30 reset which didn't work. After that I tried the WPS-button reset which didn't work either.
I've looked around at the board and havn't found any other way except serial-port-reset.
Do I really need to go that far or is there another way?
Joined: 26 Jan 2008 Posts: 13049 Location: Behind The Reset Button
Posted: Sat Nov 06, 2010 12:59 Post subject:
neither of those builds should have bothered your router. Set a static ip on your rig and see if you can ping the router. _________________ [Moderator Deleted]
Ok. So I tried to ping the router with a static ip-adress but with no respons. Not too strange because the computer doesn't even recognise that I am connected to it.
Joined: 26 Jan 2008 Posts: 13049 Location: Behind The Reset Button
Posted: Sat Nov 06, 2010 13:37 Post subject:
XinC wrote:
Ok. So I tried to ping the router with a static ip-adress but with no respons. Not too strange because the computer doesn't even recognise that I am connected to it.
Bummer.. Sounds like a serial ttl adapter is in your future.. Check your power supply. Power supply failures are common. _________________ [Moderator Deleted]