Because I'm an impatient idiot, I didn't read thoroughly before attempting, and flashed the Standard firmware instead of the micro. Now the power LED keeps blinking at me. Have I completely hosed myself?
I've tried the Mini upload via TFTP in the first three seconds of boot, nothing changes. Any advice would be welcome, and worth cookies.
If the router responds to pings, you can probably recover it.
Skip the mini build, use the micro.
One common mistake with the micro build is to use the one for wrt5g.
For flashing the 2mb routers, I think you've gotta use the generic micro version. _________________ DD-WRT<--Have you contributed to DD-WRT yet?
Well, everything else being equal, use the generic for web-based upgrades and use the build with the model hint for tftping.
However, the v5/6 JTAG-less upgrade requires the micro generic.
From bitsum's instructions...
Quote:
Download [DD-WRT micro generic]. You may want to check [DD-WRT] to make sure there isn't a newer version than v23 SP2 beta 08/03/06. Do not use the one labelled 'WRT54G' or 'WRT54GS', use the 'generic' version.
_________________ DD-WRT<--Have you contributed to DD-WRT yet?
People seem to have used them interswitched successfully, only the header looks to be modified for TFTP. I use them as per my previous post, just to be sure. _________________ EA6900 DD-WRT v3.0-r48305 std
EA6900 FreshTomato 2022.1
DIR825 B1 DD-WRT v3.0-r30949 std
retired:
WRT54GL v1.1 DD-WRT v24-SP2 vpn - build 10550
WRT610N v1 DD-WRT v24-preSP2 - build 14929 mega