Author
Message
omhhw DD-WRT Novice Joined: 12 Feb 2011 Posts: 12
Posted: Fri Feb 25, 2011 7:16 Post subject: Is there a "pppoe passthrough" in DD-WRT ?
Hi,I have a G300NH with offical 1.76 firmware.
The "pppoe passthrough" is quite useful for me to watch IPTV,but I don't want to use fat32 or XFS on my NAS disk,so is there a "pppoe passthrough" in DD-WRT ?
Thanks for help.
Back to top
Sponsor
omhhw DD-WRT Novice Joined: 12 Feb 2011 Posts: 12
Posted: Fri Feb 25, 2011 13:38 Post subject:
someone knows?
Back to top
anees.sw DD-WRT User Joined: 17 Sep 2010 Posts: 267 Location: India
Posted: Fri Feb 25, 2011 13:49 Post subject:
did you check under the security tab?
Back to top
omhhw DD-WRT Novice Joined: 12 Feb 2011 Posts: 12
Posted: Fri Feb 25, 2011 15:04 Post subject:
anees.sw wrote: did you check under the security tab?
yes,there is a "pppoe relay",I've tried it,but didn't work.the IPTV pppoe could connect for a while(about 5 min) ,and disconnect then.
Back to top
omhhw DD-WRT Novice Joined: 12 Feb 2011 Posts: 12
Posted: Fri Feb 25, 2011 16:00 Post subject:
Is pppoe relay = pppoe passthrough ?
And how to use pppoe relay ?
Back to top
omhhw DD-WRT Novice Joined: 12 Feb 2011 Posts: 12
Posted: Fri Feb 25, 2011 16:46 Post subject:
I've tried "pppoe relay" in BrainSlayer-V24-preSP2 r16214 ,why it kept disconnecting IPTV pppoe which on Lan port?
Back to top
fyi2000 DD-WRT Guru Joined: 04 Apr 2010 Posts: 642
Posted: Fri Feb 25, 2011 21:01 Post subject:
Code: /jffs/usr/sbin/pppoe-relay -C br0 -S eth1
and Save Startup
Replace "eth1" with the actual wan interface.
Back to top
omhhw DD-WRT Novice Joined: 12 Feb 2011 Posts: 12
Posted: Sat Feb 26, 2011 6:53 Post subject:
fyi2000 wrote:
Replace "eth1" with the actual wan interface.
Much thanks for help !
But when run ipkg the following error shows:
Code: ERROR: File not found: //usr/local/lib/ipkg/lists/whiterussian
You probably want to run `ipkg update'
ERROR: File not found: //usr/local/lib/ipkg/lists/non-free
You probably want to run `ipkg update'
ERROR: File not found: //usr/local/lib/ipkg/lists/backports
You probably want to run `ipkg update'
/bin/ipkg: line 1184: sort: not found
mkdir: cannot create directory '/jffs/tmp/': Read-only file system
what to do with this ?
Back to top
omhhw DD-WRT Novice Joined: 12 Feb 2011 Posts: 12
Posted: Sat Feb 26, 2011 6:55 Post subject:
Code: root@Buffalo WZR-HP-G300NH /tmp $ ipkg update
mkdir: cannot create directory '//usr/local/lib/': Read-only file system
Also tried opkg
Code: root@Buffalo WZR-HP-G300NH /tmp $ opkg install rp-pppoe-relay
Installing rp-pppoe-relay (3.10-1) to root...
Downloading http://downloads.openwrt.org/backfire/10.03.1-rc4/ar71xx/packages/rp-pppoe-relay_3.10-1_ar71xx.ipk.
Configuring kmod-crc-ccitt.
/opt//usr/lib/opkg/info/kmod-crc-ccitt.postinst: .: line 3: can't open /etc/functions.sh
Configuring kmod-ppp.
/opt//usr/lib/opkg/info/kmod-ppp.postinst: .: line 3: can't open /etc/functions.sh
Configuring rp-pppoe-relay.
Collected errors:
* pkg_run_script: postinst script returned status 2.
* opkg_configure: kmod-crc-ccitt.postinst returned 2.
* pkg_run_script: postinst script returned status 2.
* opkg_configure: kmod-ppp.postinst returned 2.
Back to top
omhhw DD-WRT Novice Joined: 12 Feb 2011 Posts: 12
Posted: Sat Feb 26, 2011 8:37 Post subject:
WZR-HP-G300NH with DD-WRT v24-sp2 (02/17/11) std
(SVN revision 16214)
Why I enable jffs2,it shows jffs space is (11.75 MB / 0)??
Back to top
omhhw DD-WRT Novice Joined: 12 Feb 2011 Posts: 12
Posted: Sat Feb 26, 2011 16:40 Post subject:
Now I've installed the rp-pppoe-relay ,but IPTV pppoe disconnect for about 3min ,somebody know why ??
Back to top
fyi2000 DD-WRT Guru Joined: 04 Apr 2010 Posts: 642
Posted: Sat Feb 26, 2011 21:20 Post subject:
omhhw wrote: I've tried "pppoe relay" in BrainSlayer-V24-preSP2 r16214 ,why it kept disconnecting IPTV pppoe which on Lan port?
Do not enable DD-WRT built-in PPPoE Relay if you install rp-pppoe-relay.
Back to top
omhhw DD-WRT Novice Joined: 12 Feb 2011 Posts: 12
Posted: Sun Feb 27, 2011 6:30 Post subject:
fyi2000 wrote: omhhw wrote: I've tried "pppoe relay" in BrainSlayer-V24-preSP2 r16214 ,why it kept disconnecting IPTV pppoe which on Lan port?
Do not enable DD-WRT built-in PPPoE Relay if you install rp-pppoe-relay.
I've tried both enable and disable ,neither work.....
And when IPTV can connect to internet ,PC can't....
Thanks for help!
Back to top
fyi2000 DD-WRT Guru Joined: 04 Apr 2010 Posts: 642
Posted: Sun Feb 27, 2011 10:45 Post subject:
Have you thought about vlan instead of PPPoE relay? Ex:
Before WAN:LAN=1:4
After WAN:LAN=2:3
Back to top
omhhw DD-WRT Novice Joined: 12 Feb 2011 Posts: 12
Posted: Sun Feb 27, 2011 12:54 Post subject:
fyi2000 wrote: Have you thought about vlan instead of PPPoE relay? Ex:
Before WAN:LAN=1:4
After WAN:LAN=2:3
Yes,I know this is the simplest way,but Atheros ddwrt doesn't have Vlan support.
I don't know why the original Buffalo firmware can do pppoe-passthrough well,ddwrt can't ?
Back to top