Alfa N5

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 13:45, 22 June 2014 (edit)
Sash (Talk | contribs)
(U-Boot)
← Previous diff
Revision as of 13:45, 22 June 2014 (edit) (undo)
Sash (Talk | contribs)
(U-Boot)
Next diff →
Line 33: Line 33:
The new version will be U-Boot 1.1.4 The new version will be U-Boot 1.1.4
 +'''Dont reset/reboot yet!'''
===DD-WRT/Recovery=== ===DD-WRT/Recovery===

Revision as of 13:45, 22 June 2014

Contents


= Planet WNAP-7320 = OTAi 724S

This instruction is also valid for the Alfa N5c

Hardware

  • CPU Atheros AR7240
  • Flash 8MB
  • RAM 32 MB

Serial Port

115000,1,n,8

1 PWR
2 TX
3 RX
4 GND


Flashing

Initial

For initial flashing you have to access the device via serial connection.

U-Boot

Since the default is set to boot from the fixed address 0x9f650000, an new bootloader must be flashed before you can boot DD-WRT. Process each line step by step from the uboot console:

tftpboot 0x80060000 uboot.bin
erase 9f000000 +$filesize
cp.b $fileaddr 0x9f000000 $filesize

The new version will be U-Boot 1.1.4 Dont reset/reboot yet!

DD-WRT/Recovery

Afer the uboot is flashed go on installing DD-WRT from the cli:

tftp 0x80060000 firmware.bin
erase 9f050000 +$filesize
cp.b $fileaddr 0x9f050000 $filesize