IPv6 setup Hurricane Electric Tunnel Broker
From DD-WRT Wiki
Revision as of 07:27, 22 February 2011 (edit) Mofunzone (Talk | contribs) (→Install Steps) ← Previous diff |
Revision as of 07:28, 22 February 2011 (edit) (undo) Mofunzone (Talk | contribs) (→See Also) Next diff → |
||
Line 266: | Line 266: | ||
fi | fi | ||
- | + | ############################################################################### | |
- | + | # v1.1 Jan 23, 2011 DAVE_SPAM VERSION (original by ac1115) | |
- | + | # HURRICANE ELECTRIC IPv6 TUNNEL SCRIPT | |
- | + | #****************************************************************************** | |
+ | # USE THE LATEST VERSION OF DD-WRT, ie 15962 | ||
+ | # see: ftp://dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/12-24-10-r15962/ | ||
+ | # tested with DD-WRT 15962 voip version on WRT610nv2 with PPPoE WAN connection | ||
+ | # | ||
+ | # | ||
+ | # | ||
+ | #****************************************************************************** | ||
+ | #Settings start here | ||
+ | #****************************************************************************** | ||
- | + | #### basic connection settings FROM http://www.tunnelbroker.net/tunnel_detail.php?tunnelid=NNNNNN | |
- | http://www. | + | SERVER_IP4_ADDR="enter ip here" |
+ | CLIENT_IPV6_ADDR="enter ip here" | ||
+ | ROUTED_64_ADDR="enter ip here" | ||
- | + | #### account info to auto update endpoint FROM http://www.tunnelbroker.net/main.php | |
- | + | USERID="enter the long hex code - NOT text username" | |
- | + | PASSWD="plain text password" | |
- | + | TUNNELID="your numeric GLOBAL tunnel id" | |
+ | |||
+ | #####Optional/Advanced Settings###### | ||
+ | #logging settings (set to /dev/null for no logging) | ||
+ | STARTUP_SCRIPT_LOG_FILE="/tmp/ipv6.log" | ||
+ | CRON_STATUS_LOG_FILE="/tmp/ipv6_lastHEUpdate.log" | ||
- | + | #Generated files paths | |
- | + | CRON_JOB_FILE="/tmp/ipv6_reload.sh" | |
+ | SCRIPT_FILE="/tmp/ipv6_run.sh" | ||
+ | RADVD_CONFIG="/tmp/radvd.conf" | ||
+ | |||
+ | #****************************************************************************** | ||
+ | #Settings end here | ||
+ | #****************************************************************************** | ||
+ | |||
+ | echo "HE IPv6 Script started" > $STARTUP_SCRIPT_LOG_FILE | ||
+ | date >> $STARTUP_SCRIPT_LOG_FILE | ||
+ | |||
+ | insmod ipv6 | ||
+ | #maybe needs to be incresed for slow boxes. | ||
+ | sleep 1.5 | ||
+ | |||
+ | #get a hash of the plaintext password | ||
+ | MD5PASSWD=`echo -n $PASSWD | md5sum | sed -e 's/ -//g'` | ||
+ | echo "" >> $STARTUP_SCRIPT_LOG_FILE | ||
+ | |||
+ | #cut out the "/64" if user typed it in | ||
+ | ROUTED_64_ADDR=`echo $ROUTED_64_ADDR|cut -f1 -d/` | ||
+ | SERVER_IP4_ADDR=`echo $SERVER_IP4_ADDR|cut -f1 -d/` | ||
+ | CLIENT_IPV6_ADDR=`echo $CLIENT_IPV6_ADDR|cut -f1 -d/` | ||
+ | echo "User added addresses cleaned/checked" >> $STARTUP_SCRIPT_LOG_FILE | ||
+ | |||
+ | #do HE update | ||
+ | echo "Do HE Update" >> $STARTUP_SCRIPT_LOG_FILE | ||
+ | wget -q "http://ipv4.tunnelbroker.net/ipv4_end.php?ipv4b=AUTO&pass=$MD5PASSWD&user_id=$USERID&tunnel_id=$TUNNELID" -O - >> $STARTUP_SCRIPT_LOG_FILE | ||
+ | |||
+ | #get wan ip for our own use from internal variable | ||
+ | WANIP=$(nvram get wan_ipaddr); | ||
+ | echo " External IP detected as:" $WANIP >> $STARTUP_SCRIPT_LOG_FILE | ||
+ | echo " External IP detected as:" $WANIP | ||
+ | |||
+ | if [ -n $WANIP ] | ||
+ | then | ||
+ | echo "configuring tunnel" >> $STARTUP_SCRIPT_LOG_FILE | ||
+ | echo "configuring tunnel" | ||
+ | |||
+ | ### create/update tunnel code | ||
+ | #fixes ioctl: No buffer space available ERROR | ||
+ | ip tunnel del he-ipv6 | ||
+ | # The following commands are from HE's website | ||
+ | ip tunnel add he-ipv6 mode sit remote $SERVER_IP4_ADDR local $WANIP ttl 255 | ||
+ | ip link set he-ipv6 up | ||
+ | ip addr add $CLIENT_IPV6_ADDR/64 dev he-ipv6 | ||
+ | ip route add ::/0 dev he-ipv6 | ||
+ | ip -f inet6 addr | ||
+ | TEMP_ADDR=`echo $ROUTED_64_ADDR'1'` | ||
+ | # These commands aren't on HE's website, but they're necessary for the tunnel to work | ||
+ | ip -6 addr add $TEMP_ADDR/64 dev br0 | ||
+ | ip route add 2000::/3 dev he-ipv6 | ||
+ | |||
+ | #Enable IPv6 forwarding | ||
+ | echo 1 > /proc/sys/net/ipv6/conf/all/forwarding | ||
+ | |||
+ | # make sure to accept proto-41 | ||
+ | iptables -I INPUT 2 -p ipv6 -i vlan1 -j ACCEPT | ||
+ | |||
+ | #make sure to not NAT proto-41 | ||
+ | iptables -t nat -A POSTROUTING --proto ! 41 -o eth0 -j MASQUERADE | ||
+ | echo "creating radvd conf" >> $STARTUP_SCRIPT_LOG_FILE | ||
+ | |||
+ | #creating radvd.conf | ||
+ | echo "#generated by startup script" > $RADVD_CONFIG | ||
+ | echo "interface br0 {" >> $RADVD_CONFIG | ||
+ | echo "AdvSendAdvert on;" >> $RADVD_CONFIG | ||
+ | echo "prefix "$ROUTED_64_ADDR"/64 {" >> $RADVD_CONFIG | ||
+ | echo "AdvOnLink on;" >> $RADVD_CONFIG | ||
+ | echo "AdvAutonomous on;" >> $RADVD_CONFIG | ||
+ | echo "AdvRouterAddr on;" >> $RADVD_CONFIG | ||
+ | echo "};" >> $RADVD_CONFIG | ||
+ | echo "};" >> $RADVD_CONFIG | ||
+ | |||
+ | #kill old versions of radvd | ||
+ | echo "killing any old versions of radvd" >> $STARTUP_SCRIPT_LOG_FILE | ||
+ | kill -s 9 $(cat /var/run/radvd.pid) | ||
+ | sleep 1 | ||
+ | |||
+ | echo "starting radvd" >> $STARTUP_SCRIPT_LOG_FILE | ||
+ | radvd -C $RADVD_CONFIG & | ||
+ | |||
+ | |||
+ | #create cron script to run this all later | ||
+ | # take this file from memory and put it into shell script file, so cron job can run it. | ||
+ | echo "nvram get rc_startup > $SCRIPT_FILE" >$CRON_JOB_FILE | ||
+ | echo "chmod +x $SCRIPT_FILE" >>$CRON_JOB_FILE | ||
+ | echo "$SCRIPT_FILE" >> $CRON_JOB_FILE | ||
+ | chmod +x $CRON_JOB_FILE | ||
+ | echo "Cron script created" >> $STARTUP_SCRIPT_LOG_FILE | ||
+ | |||
+ | |||
+ | echo "HE IPv6 Script finished" >> $STARTUP_SCRIPT_LOG_FILE | ||
+ | fi <nowiki>Insert non-formatted text here</nowiki> |
Revision as of 07:28, 22 February 2011
About
This will...
Set up HE's tunnel broker service.
Automatically finds your wan ip at boot using whatismyip.com
Automatically updates HE's endpoint on boot
Generates a radvd.conf on boot, and applies it automatically
Generates a executable file that can be used with cron to keep HE's endpoint up-to-date if you have a dynamic IP
My setup for reference.
Optimum Online Cable ISP
WRT610Nv2
v24-sp2 (Aug 12, 2010)
build 14929
You should have an account and tunnel created on the website. This post will not cover that. Install steps are below the script. This script will only work with /64 tunnels/addresses. Don't use it if you're using /48
- v1.1 Jan 23, 2011 DAVE_SPAM VERSION (original by ac1115)
- HURRICANE ELECTRIC IPv6 TUNNEL SCRIPT
- USE THE LATEST VERSION OF DD-WRT, ie 15962
- see: ftp://dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/12-24-10-r15962/
- tested with DD-WRT 15962 voip version on WRT610nv2 with PPPoE WAN connection
-
- Settings start here
- basic connection settings FROM http://www.tunnelbroker.net/tunnel_detail.php?tunnelid=NNNNNN
SERVER_IP4_ADDR="enter ip here" CLIENT_IPV6_ADDR="enter ip here" ROUTED_64_ADDR="enter ip here"
- account info to auto update endpoint FROM http://www.tunnelbroker.net/main.php
USERID="enter the long hex code - NOT text username" PASSWD="plain text password" TUNNELID="your numeric GLOBAL tunnel id"
- Optional/Advanced Settings######
- logging settings (set to /dev/null for no logging)
STARTUP_SCRIPT_LOG_FILE="/tmp/ipv6.log" CRON_STATUS_LOG_FILE="/tmp/ipv6_lastHEUpdate.log"
- Generated files paths
CRON_JOB_FILE="/tmp/ipv6_reload.sh" SCRIPT_FILE="/tmp/ipv6_run.sh" RADVD_CONFIG="/tmp/radvd.conf"
- Settings end here
echo "HE IPv6 Script started" > $STARTUP_SCRIPT_LOG_FILE date >> $STARTUP_SCRIPT_LOG_FILE
insmod ipv6
- maybe needs to be incresed for slow boxes.
sleep 1.5
- get a hash of the plaintext password
MD5PASSWD=`echo -n $PASSWD | md5sum | sed -e 's/ -//g'` echo "" >> $STARTUP_SCRIPT_LOG_FILE
- cut out the "/64" if user typed it in
ROUTED_64_ADDR=`echo $ROUTED_64_ADDR|cut -f1 -d/` SERVER_IP4_ADDR=`echo $SERVER_IP4_ADDR|cut -f1 -d/` CLIENT_IPV6_ADDR=`echo $CLIENT_IPV6_ADDR|cut -f1 -d/` echo "User added addresses cleaned/checked" >> $STARTUP_SCRIPT_LOG_FILE
- do HE update
echo "Do HE Update" >> $STARTUP_SCRIPT_LOG_FILE wget -q "http://ipv4.tunnelbroker.net/ipv4_end.php?ipv4b=AUTO&pass=$MD5PASSWD&user_id=$USERID&tunnel_id=$TUNNELID" -O - >> $STARTUP_SCRIPT_LOG_FILE
- get wan ip for our own use from internal variable
WANIP=$(nvram get wan_ipaddr); echo " External IP detected as:" $WANIP >> $STARTUP_SCRIPT_LOG_FILE echo " External IP detected as:" $WANIP
if [ -n $WANIP ] then echo "configuring tunnel" >> $STARTUP_SCRIPT_LOG_FILE echo "configuring tunnel"
- create/update tunnel code
- fixes ioctl: No buffer space available ERROR
ip tunnel del he-ipv6
- The following commands are from HE's website
ip tunnel add he-ipv6 mode sit remote $SERVER_IP4_ADDR local $WANIP ttl 255 ip link set he-ipv6 up ip addr add $CLIENT_IPV6_ADDR/64 dev he-ipv6 ip route add ::/0 dev he-ipv6 ip -f inet6 addr TEMP_ADDR=`echo $ROUTED_64_ADDR'1'`
- These commands aren't on HE's website, but they're necessary for the tunnel to work
ip -6 addr add $TEMP_ADDR/64 dev br0 ip route add 2000::/3 dev he-ipv6
- Enable IPv6 forwarding
echo 1 > /proc/sys/net/ipv6/conf/all/forwarding
- make sure to accept proto-41
iptables -I INPUT 2 -p ipv6 -i vlan1 -j ACCEPT
- make sure to not NAT proto-41
iptables -t nat -A POSTROUTING --proto ! 41 -o eth0 -j MASQUERADE echo "creating radvd conf" >> $STARTUP_SCRIPT_LOG_FILE
- creating radvd.conf
echo "#generated by startup script" > $RADVD_CONFIG echo "interface br0 {" >> $RADVD_CONFIG echo "AdvSendAdvert on;" >> $RADVD_CONFIG echo "prefix "$ROUTED_64_ADDR"/64 {" >> $RADVD_CONFIG echo "AdvOnLink on;" >> $RADVD_CONFIG echo "AdvAutonomous on;" >> $RADVD_CONFIG echo "AdvRouterAddr on;" >> $RADVD_CONFIG echo "};" >> $RADVD_CONFIG echo "};" >> $RADVD_CONFIG
- kill old versions of radvd
echo "killing any old versions of radvd" >> $STARTUP_SCRIPT_LOG_FILE kill -s 9 $(cat /var/run/radvd.pid) sleep 1
echo "starting radvd" >> $STARTUP_SCRIPT_LOG_FILE radvd -C $RADVD_CONFIG &
- create cron script to run this all later
- take this file from memory and put it into shell script file, so cron job can run it.
echo "nvram get rc_startup > $SCRIPT_FILE" >$CRON_JOB_FILE echo "chmod +x $SCRIPT_FILE" >>$CRON_JOB_FILE echo "$SCRIPT_FILE" >> $CRON_JOB_FILE chmod +x $CRON_JOB_FILE echo "Cron script created" >> $STARTUP_SCRIPT_LOG_FILE
echo "HE IPv6 Script finished" >> $STARTUP_SCRIPT_LOG_FILE
fi
- v1.1 Jan 23, 2011 DAVE_SPAM VERSION (original by ac1115)
- HURRICANE ELECTRIC IPv6 TUNNEL SCRIPT
- USE THE LATEST VERSION OF DD-WRT, ie 15962
- see: ftp://dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/12-24-10-r15962/
- tested with DD-WRT 15962 voip version on WRT610nv2 with PPPoE WAN connection
-
- Settings start here
- basic connection settings FROM http://www.tunnelbroker.net/tunnel_detail.php?tunnelid=NNNNNN
SERVER_IP4_ADDR="enter ip here" CLIENT_IPV6_ADDR="enter ip here" ROUTED_64_ADDR="enter ip here"
- account info to auto update endpoint FROM http://www.tunnelbroker.net/main.php
USERID="enter the long hex code - NOT text username" PASSWD="plain text password" TUNNELID="your numeric GLOBAL tunnel id"
- Optional/Advanced Settings######
- logging settings (set to /dev/null for no logging)
STARTUP_SCRIPT_LOG_FILE="/tmp/ipv6.log" CRON_STATUS_LOG_FILE="/tmp/ipv6_lastHEUpdate.log"
- Generated files paths
CRON_JOB_FILE="/tmp/ipv6_reload.sh" SCRIPT_FILE="/tmp/ipv6_run.sh" RADVD_CONFIG="/tmp/radvd.conf"
- Settings end here
echo "HE IPv6 Script started" > $STARTUP_SCRIPT_LOG_FILE date >> $STARTUP_SCRIPT_LOG_FILE
insmod ipv6
- maybe needs to be incresed for slow boxes.
sleep 1.5
- get a hash of the plaintext password
MD5PASSWD=`echo -n $PASSWD | md5sum | sed -e 's/ -//g'` echo "" >> $STARTUP_SCRIPT_LOG_FILE
- cut out the "/64" if user typed it in
ROUTED_64_ADDR=`echo $ROUTED_64_ADDR|cut -f1 -d/` SERVER_IP4_ADDR=`echo $SERVER_IP4_ADDR|cut -f1 -d/` CLIENT_IPV6_ADDR=`echo $CLIENT_IPV6_ADDR|cut -f1 -d/` echo "User added addresses cleaned/checked" >> $STARTUP_SCRIPT_LOG_FILE
- do HE update
echo "Do HE Update" >> $STARTUP_SCRIPT_LOG_FILE wget -q "http://ipv4.tunnelbroker.net/ipv4_end.php?ipv4b=AUTO&pass=$MD5PASSWD&user_id=$USERID&tunnel_id=$TUNNELID" -O - >> $STARTUP_SCRIPT_LOG_FILE
- get wan ip for our own use from internal variable
WANIP=$(nvram get wan_ipaddr); echo " External IP detected as:" $WANIP >> $STARTUP_SCRIPT_LOG_FILE echo " External IP detected as:" $WANIP
if [ -n $WANIP ] then echo "configuring tunnel" >> $STARTUP_SCRIPT_LOG_FILE echo "configuring tunnel"
- create/update tunnel code
- fixes ioctl: No buffer space available ERROR
ip tunnel del he-ipv6
- The following commands are from HE's website
ip tunnel add he-ipv6 mode sit remote $SERVER_IP4_ADDR local $WANIP ttl 255 ip link set he-ipv6 up ip addr add $CLIENT_IPV6_ADDR/64 dev he-ipv6 ip route add ::/0 dev he-ipv6 ip -f inet6 addr TEMP_ADDR=`echo $ROUTED_64_ADDR'1'`
- These commands aren't on HE's website, but they're necessary for the tunnel to work
ip -6 addr add $TEMP_ADDR/64 dev br0 ip route add 2000::/3 dev he-ipv6
- Enable IPv6 forwarding
echo 1 > /proc/sys/net/ipv6/conf/all/forwarding
- make sure to accept proto-41
iptables -I INPUT 2 -p ipv6 -i vlan1 -j ACCEPT
- make sure to not NAT proto-41
iptables -t nat -A POSTROUTING --proto ! 41 -o eth0 -j MASQUERADE echo "creating radvd conf" >> $STARTUP_SCRIPT_LOG_FILE
- creating radvd.conf
echo "#generated by startup script" > $RADVD_CONFIG echo "interface br0 {" >> $RADVD_CONFIG echo "AdvSendAdvert on;" >> $RADVD_CONFIG echo "prefix "$ROUTED_64_ADDR"/64 {" >> $RADVD_CONFIG echo "AdvOnLink on;" >> $RADVD_CONFIG echo "AdvAutonomous on;" >> $RADVD_CONFIG echo "AdvRouterAddr on;" >> $RADVD_CONFIG echo "};" >> $RADVD_CONFIG echo "};" >> $RADVD_CONFIG
- kill old versions of radvd
echo "killing any old versions of radvd" >> $STARTUP_SCRIPT_LOG_FILE kill -s 9 $(cat /var/run/radvd.pid) sleep 1
echo "starting radvd" >> $STARTUP_SCRIPT_LOG_FILE radvd -C $RADVD_CONFIG &
- create cron script to run this all later
- take this file from memory and put it into shell script file, so cron job can run it.
echo "nvram get rc_startup > $SCRIPT_FILE" >$CRON_JOB_FILE echo "chmod +x $SCRIPT_FILE" >>$CRON_JOB_FILE echo "$SCRIPT_FILE" >> $CRON_JOB_FILE chmod +x $CRON_JOB_FILE echo "Cron script created" >> $STARTUP_SCRIPT_LOG_FILE
echo "HE IPv6 Script finished" >> $STARTUP_SCRIPT_LOG_FILE
fi
- v1.1 Jan 23, 2011 DAVE_SPAM VERSION (original by ac1115)
- HURRICANE ELECTRIC IPv6 TUNNEL SCRIPT
- USE THE LATEST VERSION OF DD-WRT, ie 15962
- see: ftp://dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/12-24-10-r15962/
- tested with DD-WRT 15962 voip version on WRT610nv2 with PPPoE WAN connection
-
- Settings start here
- basic connection settings FROM http://www.tunnelbroker.net/tunnel_detail.php?tunnelid=NNNNNN
SERVER_IP4_ADDR="enter ip here" CLIENT_IPV6_ADDR="enter ip here" ROUTED_64_ADDR="enter ip here"
- account info to auto update endpoint FROM http://www.tunnelbroker.net/main.php
USERID="enter the long hex code - NOT text username" PASSWD="plain text password" TUNNELID="your numeric GLOBAL tunnel id"
- Optional/Advanced Settings######
- logging settings (set to /dev/null for no logging)
STARTUP_SCRIPT_LOG_FILE="/tmp/ipv6.log" CRON_STATUS_LOG_FILE="/tmp/ipv6_lastHEUpdate.log"
- Generated files paths
CRON_JOB_FILE="/tmp/ipv6_reload.sh" SCRIPT_FILE="/tmp/ipv6_run.sh" RADVD_CONFIG="/tmp/radvd.conf"
- Settings end here
echo "HE IPv6 Script started" > $STARTUP_SCRIPT_LOG_FILE date >> $STARTUP_SCRIPT_LOG_FILE
insmod ipv6
- maybe needs to be incresed for slow boxes.
sleep 1.5
- get a hash of the plaintext password
MD5PASSWD=`echo -n $PASSWD | md5sum | sed -e 's/ -//g'` echo "" >> $STARTUP_SCRIPT_LOG_FILE
- cut out the "/64" if user typed it in
ROUTED_64_ADDR=`echo $ROUTED_64_ADDR|cut -f1 -d/` SERVER_IP4_ADDR=`echo $SERVER_IP4_ADDR|cut -f1 -d/` CLIENT_IPV6_ADDR=`echo $CLIENT_IPV6_ADDR|cut -f1 -d/` echo "User added addresses cleaned/checked" >> $STARTUP_SCRIPT_LOG_FILE
- do HE update
echo "Do HE Update" >> $STARTUP_SCRIPT_LOG_FILE wget -q "http://ipv4.tunnelbroker.net/ipv4_end.php?ipv4b=AUTO&pass=$MD5PASSWD&user_id=$USERID&tunnel_id=$TUNNELID" -O - >> $STARTUP_SCRIPT_LOG_FILE
- get wan ip for our own use from internal variable
WANIP=$(nvram get wan_ipaddr); echo " External IP detected as:" $WANIP >> $STARTUP_SCRIPT_LOG_FILE echo " External IP detected as:" $WANIP
if [ -n $WANIP ] then echo "configuring tunnel" >> $STARTUP_SCRIPT_LOG_FILE echo "configuring tunnel"
- create/update tunnel code
- fixes ioctl: No buffer space available ERROR
ip tunnel del he-ipv6
- The following commands are from HE's website
ip tunnel add he-ipv6 mode sit remote $SERVER_IP4_ADDR local $WANIP ttl 255 ip link set he-ipv6 up ip addr add $CLIENT_IPV6_ADDR/64 dev he-ipv6 ip route add ::/0 dev he-ipv6 ip -f inet6 addr TEMP_ADDR=`echo $ROUTED_64_ADDR'1'`
- These commands aren't on HE's website, but they're necessary for the tunnel to work
ip -6 addr add $TEMP_ADDR/64 dev br0 ip route add 2000::/3 dev he-ipv6
- Enable IPv6 forwarding
echo 1 > /proc/sys/net/ipv6/conf/all/forwarding
- make sure to accept proto-41
iptables -I INPUT 2 -p ipv6 -i vlan1 -j ACCEPT
- make sure to not NAT proto-41
iptables -t nat -A POSTROUTING --proto ! 41 -o eth0 -j MASQUERADE echo "creating radvd conf" >> $STARTUP_SCRIPT_LOG_FILE
- creating radvd.conf
echo "#generated by startup script" > $RADVD_CONFIG echo "interface br0 {" >> $RADVD_CONFIG echo "AdvSendAdvert on;" >> $RADVD_CONFIG echo "prefix "$ROUTED_64_ADDR"/64 {" >> $RADVD_CONFIG echo "AdvOnLink on;" >> $RADVD_CONFIG echo "AdvAutonomous on;" >> $RADVD_CONFIG echo "AdvRouterAddr on;" >> $RADVD_CONFIG echo "};" >> $RADVD_CONFIG echo "};" >> $RADVD_CONFIG
- kill old versions of radvd
echo "killing any old versions of radvd" >> $STARTUP_SCRIPT_LOG_FILE kill -s 9 $(cat /var/run/radvd.pid) sleep 1
echo "starting radvd" >> $STARTUP_SCRIPT_LOG_FILE radvd -C $RADVD_CONFIG &
- create cron script to run this all later
- take this file from memory and put it into shell script file, so cron job can run it.
echo "nvram get rc_startup > $SCRIPT_FILE" >$CRON_JOB_FILE echo "chmod +x $SCRIPT_FILE" >>$CRON_JOB_FILE echo "$SCRIPT_FILE" >> $CRON_JOB_FILE chmod +x $CRON_JOB_FILE echo "Cron script created" >> $STARTUP_SCRIPT_LOG_FILE
echo "HE IPv6 Script finished" >> $STARTUP_SCRIPT_LOG_FILE
fi Insert non-formatted text here