Linking Routers

(Difference between revisions)

Revision as of 23:59, 23 March 2018

-In this tutorial, we will discuss different alternatives for linking routers in order to create wifi networks or just repeaters.
+==Page Moved==
+See here: [https://www.dd-wrt.com/wiki/index.php/Category:Linking_Routers Category:Linking Routers]
-== Alternatives ==
-=== WDS ===
-* [[WDS Linked router network]]
-* [[WDS Point To Point (P2P)]]
-=== OLSR ===
-* [[Mesh Networking with OLSR]]
-* [[http://dev.wifidog.org/wiki/doc/gateway-server/WifiDogAndOlsr|WifiDog + OLSR]]
-=== Repeater / Repeater Bridge ===
-* [[Repeater Bridge]] - A wireless repeater with DHCP & NAT <u>disabled</u>, clients on <u>same subnet</u> as host AP.
-* [[Universal Wireless Repeater]]
-* [[Repeater]] - A wireless repeater with DHCP & NAT <u>enabled</u>, clients on <u>different subnet</u> from host AP.
-=== Client / Client Bridge ===
-* [[Wireless Bridge]] - Join two wired networks by two Wireless routers building a bridge.
-* [[Client Bridged]] - (simplified instructions for a wireless bridge)
-* [[Client Mode]] - Join two wired networks by two Wireless routers (unbridged).
-=== Access Point / Switch ===
-* [[Wireless Access Point]] - Extend Wi-Fi (Requires physical ethernet connection between routers)
-* [[Switch]] - Similar config as WAP, but radio disabled (accepts only wired connections)
-<br>
-== Comparisons ==
-* [[Repeating Mode Comparisons]]
-* [[Bridging|Bridging Mode Comparisons]]
-[[Category: English documentation]]
-[[Category: Basic tutorials]]