Linksys WRT54GS v1.0
From DD-WRT Wiki
How To Flash
JTAG Recovery
JTAG:
- Erase Wholeflash x2
- Flash CFE
- Unplug Power
- Unplug JTAG Cable
TFTP
- Set Rig ip static 192.168.1.10
- Plug network cable from rig to port 1
- Plug in power
- Wait for DMZ light to do a steady pulse, When it is lit on the 3rd time click upgrade. The DMZ light must be lit when you click upgrade.
- Hard Reset 30\30\30
Other Notes
[comment added 17/05/08 by 7E0D1450] I installed dd-wrt.v24-9433_VINT_mega.bin directly from Linksys Web Interface (Firmware version 2.07.1) without problems or issues. The procedure is:
1. Hard Reset (press for 30 secs the reset button - IMPORTANT). 2. Upload the firmware from Linksys Web Interface. 3. When finished the flashing, Hard Reset (press for 30 secs the reset button - IMPORTANT).
Reference in dd-wrt forum: [1]
____________________________________________ [comment added 18/03/09 by fattrain] I installed dd-wrt.v24-9517_VINT_std.bin directly from Linksys Web Interface (Firmware version Ver.4.71.4) without problems or issues. The procedure is:
1. Hard Reset (press for 30 secs the reset button - IMPORTANT). 2. Upload the firmware from Linksys Web Interface. 3. When finished the flashing, Hard Reset (press for 30 secs the reset button - IMPORTANT).
Enjoy! :-)