Linksys WRV54G
From DD-WRT Wiki
Contents |
Original FW Bootlog
RGLoader Version: 2.4.4 Internal Version: 1.1 Press ESC to enter BOOT MENU mode. Booting an active image in 0 seconds Uncompressing Linux....................................................... done, booting the kernel. Linux version 2.4.19openrg-rmk6-ds1 (root@guava54-Desktop) (gcc version 2.95.3 20010315 (release/MontaVista)) #135 Thu Nov 20 02:31:26 CST 2003 CPU: Intel XScale-IXP425 revision 0 Machine: Gemtek IXP425 WX5715 Security risk: creating user accessible mapping for 0xc8000000 at 0xff000000 Security risk: creating user accessible mapping for 0xc0000000 at 0xff00c000 Security risk: creating user accessible mapping for 0xc4000000 at 0xff00d000 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttyS1,115200 root=/dev/ram0 rw nohalt Using IXP425 Timer 0 as timer source Calibrating delay loop... 266.24 BogoMIPS Memory: 32MB = 32MB total Memory: 26608KB available (1362K code, 263K data, 216K init) XScale Cache/TLB Locking Copyright(c) 2001 MontaVista Software, Inc. Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX PCI: bus0: Fast back to back transfers enabled Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd Random: 0x55570264 pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0xff000003 (irq = 15) is a IXP425 UART ttyS01 at 0xff001003 (irq = 13) is a IXP425 UART RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize loop: loaded (max 8 devices) PPP generic driver version 2.4.2 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 2048) klips_info:ipsec_init: KLIPS startup, FreeS/WAN IPSec version: 1.99 NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. IPv6 v0.8 for NET4.0 IPv6 over IPv4 tunneling driver 802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com PPP MPPE compression module registered RAMDISK: Compressed image found at block 0 Freeing initrd memory: 3926K VFS: Mounted root (ext2 filesystem). Freeing init memory: 216K insmod: add-symbol-file PATH/kos_lib.o 0xc2802060 -s .data 0xc2805120 -s .bss 0xc280521c insmod: add-symbol-file PATH/ixp425_flash_mod.o 0xc2807060 -s .dUsing buffer write method ata 0xc28073b4 -s .bss 0xc2807438 Using predefined MTD partitions. Creating 1 MTD partitions on "ixp425 Flash": 0x00000000-0x00800000 : "openrg" Press ESC to enter BOOT MENU mode. insmod: add-symbol-file PATH/ppp_deflate.o 0xc302b060 -s .data 0xc30335ac -s .bss 0xc3033bf4 PPP Deflate Compression module registered insmod: add-symbol-file PATH/bsd_comp.o 0xc3037060 -s .data 0xc3PPP BSD Compression module registered 037f80 -s .bss 0xc3037fde insmod: add-symbol-file PATH/csr.o 0xc303a060 -s .data 0xc3052518 -s .bss 0xc3071518 Intel CSR module init. insmod: add-symbol-file PATH/ixp425_csr_init_mod.o 0xc30d6060 -s .data 0xc30d65d0 -s .bss 0xc30d65d0 Intel CSR QMGR & NPE(s) init done. Initializing ixp425_eth driver 0.0.8eth_mod.o 0xc30d8060 -s .data 0xc30d9a64 -s .bss 0xc30d9b1c PHY 0 MAC address is: 04:04:04:04:04:04 PHY 1 MAC address is: 06:06:06:06:06:06 insmod: add-symbol-file PATH/igmp_proxy_mod.o 0xc30dc060 -s .data 0xc30dd4e0 -s .bss 0xc30dd55c insmod: add-symbol-file PATH/log_chardev.o 0xc30df060 -s .data 0xc30dfa48 -s .bss 0xc30dfb2c insmod: add-symbol-file PATH/tcp_mss.o 0xc30e2060 -s .data 0xc30e22f4 -s .bss 0xc30e2310 insmod: add-symbol-file PATH/ipfilter.o 0xc30e4060 -s .data 0xc30f7198 -s .bss 0xc30f871c insmod: add-symbol-file PATH/rg_bridge.o 0xc30fd060 -s .data 0xc3101390 -s .bss 0xc31013bc insmod: add-symbol-file PATH/rg_dhcp_pktfil.o 0xc3104060 -s .data 0xc3104a44 -s .bss 0xc3104b0c insmod: add-symbol-file PATH/rg_auth1x_pktfil.o 0xc3106060 -s .data 0xc3107280 -s .bss 0xc31072c8 insmod: add-symbol-file PATH/btn.o 0xc3109060 -s .data 0xc31095fc -s .bss 0xc3109694 insmod: add-symbol-file PATH/rg_ipv4.o 0xc310b060 -s .data 0xc31IPV4 device driver registered 0b214 -s .bss 0xc310b252 insmod: add-symbol-file PATH/krgldr_module.o 0xc310d060 -s .data 0xc310d25c -s .bss 0xc310d284 insmod: add-symbol-file PATH/hwdmz.o 0xc310f060 -s .data 0xc310fa00 -s .bss 0xc310fa97 insmod: add-symbol-file PATH/islpci.o 0xc3111060 -s .data 0xc311f650 -s .bss 0xc3120800 insmod: add-symbol-file PATH/hwdmz_conf.o 0xc314d060 -s .data 0xc314ea48 -s .bss 0xc314ebb4 IP Filter: initialized. Default = block all PHY 1 MAC address is: 00:0c:41:d6:85:9d PHY 0 MAC address is: 00:0c:41:d6:85:9c ixp0: Entering promiscuous mode device ixp0 entered promiscuous mode STP: ixp0 enters blocking mode device eth0 entered promiscuous mode STP: eth0 enters blocking mode STP: ixp0 enters blocking mode Wireless Network Mode:1 Username: Error resolving hostname rmt_upd failed retrieving new version STP: eth0 exits blocking mode STP: ixp0 exits blocking mode Password: Vendor buffer is <Vendor information which is to be written to the vendor section and read from it later on. Test information only, change it according to your needs>
External Links
http://nuwiki.openwrt.org/toh/linksys/wrv54g
http://nuwiki.openwrt.org/oldwiki/openwrtdocs/hardware/linksys/wrv54g
http://reviews.cnet.com/routers/wireless-g-vpn-broadband/4505-3319_7-30587433.html