Ralink (unbranded/unsupported)
From DD-WRT Wiki
(Difference between revisions)
| Revision as of 13:10, 6 January 2013 (edit) Sash (Talk | contribs) (→Supported Hardware) ← Previous diff |
Revision as of 13:11, 6 January 2013 (edit) (undo) Sash (Talk | contribs) (→Flash instructions) Next diff → |
||
| Line 14: | Line 14: | ||
| =Flash instructions= | =Flash instructions= | ||
| + | |||
| + | Check the supported devices list for units which use the same chipset and are already supported. | ||
| ==RT2880F== | ==RT2880F== | ||
Revision as of 13:11, 6 January 2013
Contents |
Since there a many unbranded and unsupported Ralink based router out there, which have all similar/equal specs, there is a fair chance to get them running DD-WRT even if they are not officially supportey by this time.
Supported Hardware
There are a few basic specs that are mandatory for running DD-WRT on Ralink based router.
- >=4MB flash
- 32MB RAM (16MB RAM only on stripped DD-WRT versions)
- UBoot bootloader
Flash instructions
Check the supported devices list for units which use the same chipset and are already supported.
RT2880F
This units have an external switch, so there is always a hardware donation needed for porting it to DD-WRT.