Talk:Station Bridge (Routed)
From DD-WRT Wiki
(Difference between revisions)
| Revision as of 14:46, 26 November 2006 (edit) 1164551729 (Talk | contribs) ← Previous diff |
Revision as of 23:20, 18 July 2010 (edit) (undo) San Aequitas (Talk | contribs) Next diff → |
||
| Line 1: | Line 1: | ||
| + | Three statements which one is true? | ||
| + | 1 New Wiki Material-Client Bridge<br> | ||
| + | First of all, do not even try to do client bridge with dd-wrt SP1. It won't work. | ||
| + | 2 Former Wiki Material<br> | ||
| + | Client Bridge is said to be working with the old V23 SP2 build...but not the newest V24 builds. | ||
| + | 3 V24 builds<br> | ||
| + | Confirmed working on V24-Final V24-SP1 V24 Pre-SP2 | ||
| + | =========================================================== | ||
| + | Ok, well just wanted to throw in a few points on this article. | ||
| + | Under Former Wiki material: | ||
| + | - host router is an Actiontec MI24-WR, via Verizon FiOs. Not Linux-based (as far as I know) and mine worked fine. No issues. | ||
| + | Under V24 Builds, in the setup as explained by redhawk: | ||
| + | - I can confirm it works with v24-sp2 (07/22/09) micro. | ||
| + | - Step 5 should also mention that Local DNS (after setting gateway) needs to be set to the same ip as the gateway (192.168.1.1 in most cases) and NOT left at 0.0.0.0. I was following instructions to the T and didn't touch this at first, and so I could see both routers (AP and CB) on both computers, but CB computer had no internet. | ||
| - | <div style="display:none"> | ||
| - | [l_sp_18] | ||
| - | + | = San Aequitas, 18JUL2010 | |
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
Revision as of 23:20, 18 July 2010
Three statements which one is true?
1 New Wiki Material-Client Bridge
First of all, do not even try to do client bridge with dd-wrt SP1. It won't work.
2 Former Wiki Material
Client Bridge is said to be working with the old V23 SP2 build...but not the newest V24 builds.
3 V24 builds
Confirmed working on V24-Final V24-SP1 V24 Pre-SP2
===============================================
Ok, well just wanted to throw in a few points on this article.
Under Former Wiki material:
- host router is an Actiontec MI24-WR, via Verizon FiOs. Not Linux-based (as far as I know) and mine worked fine. No issues.
Under V24 Builds, in the setup as explained by redhawk:
- I can confirm it works with v24-sp2 (07/22/09) micro.
- Step 5 should also mention that Local DNS (after setting gateway) needs to be set to the same ip as the gateway (192.168.1.1 in most cases) and NOT left at 0.0.0.0. I was following instructions to the T and didn't touch this at first, and so I could see both routers (AP and CB) on both computers, but CB computer had no internet.
= San Aequitas, 18JUL2010