Talk:Station Bridge (Routed), Talk:Client Bridged

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 23:20, 18 July 2010 (edit)
San Aequitas (Talk | contribs)

← Previous diff
Current revision (19:49, 19 December 2023) (edit) (undo)
Kernel-panic69 (Talk | contribs)
(Talk:Client Bridged moved to Talk:Station Bridge (Routed): https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=335537)
 
Line 1: Line 1:
-Three statements which one is true?+#REDIRECT [[Talk:Station Bridge (Routed)]]
- +
-1 New Wiki Material-Client Bridge<br>+
-First of all, do not even try to do client bridge with dd-wrt SP1. It won't work. +
- +
-2 Former Wiki Material<br>+
-Client Bridge is said to be working with the old V23 SP2 build...but not the newest V24 builds.+
- +
-3 V24 builds<br>+
-Confirmed working on V24-Final V24-SP1 V24 Pre-SP2+
- +
-===========================================================+
- +
-Ok, well just wanted to throw in a few points on this article.+
- +
-Under Former Wiki material:+
- +
- - host router is an Actiontec MI24-WR, via Verizon FiOs. Not Linux-based (as far as I know) and mine worked fine. No issues.+
- +
- +
-Under V24 Builds, in the setup as explained by redhawk:+
- +
- - I can confirm it works with v24-sp2 (07/22/09) micro. +
- +
- - Step 5 should also mention that Local DNS (after setting gateway) needs to be set to the same ip as the gateway (192.168.1.1 in most cases) and NOT left at 0.0.0.0. I was following instructions to the T and didn't touch this at first, and so I could see both routers (AP and CB) on both computers, but CB computer had no internet. +
- +
- +
- = San Aequitas, 18JUL2010+

Current revision

  1. REDIRECT Talk:Station Bridge (Routed)