Now after 10 seconds, i still can login to 192.168.1.254 and see the RedBoot Prompt. The Fonera is not booting normaly after the 10 seconds. Whats wrong ?
How can i fix this, or delete this RedBoot thing, so the Fonera is starting normaly, like bevor this RedBoot changes ?
Quote:
There I can reflash the whole device again or just do
Code:
RedBoot> fis load -l vmlinux.bin.l7
Image loaded from 0x80041000-0x80283085
RedBoot> exec
And after a while I can reconnect to 192.168.1.1...
But after that I cannot connect to the Fonera anymore. I tried the all of the recovering tips but I cannot get an answer.
Can someone help here?
I cannot on 192.168.1.10 anymore because there is no wireless connection.
I am having the exact same problem.
I can only access the fonera through a max232 interface, no other recovery tips have worked.
How do you install dd-wrt using a serial console (hyperterminal) only?
Thanks for your help.
-Ubergamer
if i remember correctly it is telnet that's the problem. use putty or some other client and it should work. there is a faq in the german section...should also solve your problem.
ok got it. it is realy a telnet problem but the funni thing is that my main system is opensuse and there its also not working. this had confused me so i sthink its a redboot problem. my other redboot devices are woking with linux telnet.
so the second thing is. does sombody has a state of the art and ready to flash redboot + config for me
i have a fon2100 the old one with the heatsink on the soc.
http://www.fonerahacks.com has the relevant guides and links to needed files. _________________ RT-AC66U (asuswrt-merlin 374.43 LTS V44EA)
Xiaomi AX3600 (v1.0.67)
Unfortunately, I had no network connection at this time and so there was no out.hex. I am not sure what happens without the out.hex, but it is definitely not good
Any possibility to save my fon?
At the moment, only the power led is on. If I connect a lan cable, the Internet-led is on and blinking alternately. Resetting doesn't work anymore.
Any ideas except connecting a serial cable which I don't have? I tried several addresses (192.168.10.*,192.168.1.*,169.254.255.*) on my laptop, tried pinging the fon, but no response
if you didnt have a ethernet connection the wget command was interrupted by a error message.
the hex file wont exist locally so ther were also a error message. so from my point of few the fon should be alive _________________ Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
Posted: Sat Jul 19, 2008 13:49 Post subject: redboot
Hm, ok, maybe I didn't explain myself clearly enough.
I had a ethernet cable plugin in, but I had no working DNS settings, so the fon could resolve the url with the out.hex-file and the wget command failed. What happened was, that the following command was executed without any out.hex:
Unfortunately, I don't remember if there was an error message after this command. The reboot command was executed directly after the above command and now I have no idea about the state of my fon.
After the first ssh step I think my fonera is briked. I had a classic 0.7.1r1 firmware, ssh with the method of step1 and step2 and then I have uploaded the camicia file to the fonera, applied and rebooted
What can I do ?
Why this stopped (to other users too, as I can read)
The only method to have my fonera again is the cable? (I have tested software methods but nothing)