Joined: 07 Jun 2006 Posts: 2087 Location: Odessa, Ukraine
Posted: Tue Mar 18, 2008 5:28 Post subject:
Try -probeonly /noemw & or -probeonly /noemw /nocwd, let's see id that picks up the flash _________________ Want JTAG support - Donate a router
or Donate with PayPal !
Joined: 07 Jun 2006 Posts: 2087 Location: Odessa, Ukraine
Posted: Thu Mar 20, 2008 6:06 Post subject:
@charlo
Well the flash is already added, I didn't see that you tried tjtag -probeonly /noemw or /noemw /nodma _________________ Want JTAG support - Donate a router
or Donate with PayPal !
Joined: 07 Jun 2006 Posts: 2087 Location: Odessa, Ukraine
Posted: Thu Mar 20, 2008 15:05 Post subject:
Yes, he probably does, Im asking you to run those commands
/noemw and /nocwd....it will not show the flash if the commands are wrong, also I thought it was a UBM /fc:45...double check you version, Im working on the next release, they could be a little different _________________ Want JTAG support - Donate a router
or Donate with PayPal !
Ok I will try with /noemw /nocwd tonight. I should have brought the unit with me at the office but it's currently at my place.
/fc:45 is 2 MB Intel Chip, I don't think it's what I should use.
What's the most recent version of tjtag ?
Yesterday I gave a shot to sveasoft Talisman Basic 1.3.5 on my second 300N v 1.1.
It works just fine but I prefer DD WRT's interface. May be from that other router I could confirm what's the flash ? Antything to poll from the NVram ?
Joined: 07 Jun 2006 Posts: 2087 Location: Odessa, Ukraine
Posted: Fri Mar 21, 2008 5:42 Post subject:
All I can say is check you connections, sounds like one of the lines on the routers JTAG port is loose or not soldered completly. _________________ Want JTAG support - Donate a router
or Donate with PayPal !