I have some 2M flash wgr614 v6.I use a linksys WRT54G V5 with DDWRT rom change into,and change the RAM to 16m.It works good,but the reset button didnot work.Wan port become lan port,and lan4 become WAN port,but use vlan setting,it is easy to fix it.
But becasue it is MICRO version,cannot use SSH and CIFS to copy new CFE.bin into the router.
How can I do to copy files into?So I can change the CFE,and lock the 16m memory and the lan port?
Has the same flash chip as you, which is 2Mbtye in size and will take the micro build. _________________ (05/02/17) std - 31924
Linksys WRT400N
Buffalo WHR-G300N
Joined: 04 Oct 2007 Posts: 1258 Location: Ohio USA
Posted: Mon Aug 10, 2009 18:30 Post subject:
Well according to this post, it can be done, that is if the router has 2megs of flash, and a way of replacing the BSP with CFE. But there is no process of just uploading dd-wrt via the web interface. _________________ (05/02/17) std - 31924
Linksys WRT400N
Buffalo WHR-G300N
well well... have any idea if we change the flash into 4mb, 8mb or larger size??? since i can easily get all those Flash chip... dun waste the chance..
Posted: Sat Oct 31, 2009 14:39 Post subject: wgr614 v6 jtag
you can add jtag to wgr614 v6, there are 6 little circle copper in the back, that was a jtag connecttion. i had my soder and and flash wrt54gv5 cfe.bin. but i had problem with flash dd-wrt.v24_micro_generic.bin. it upload via ftp fine but stall at programming.
Joined: 04 Oct 2007 Posts: 1258 Location: Ohio USA
Posted: Sun Nov 01, 2009 18:24 Post subject: Re: wgr614 v6 jtag
tran_2q wrote:
you can add jtag to wgr614 v6, there are 6 little circle copper in the back, that was a jtag connecttion. i had my soder and and flash wrt54gv5 cfe.bin. but i had problem with flash dd-wrt.v24_micro_generic.bin. it upload via ftp fine but stall at programming.
Not sure which pins you are talking about, but the 12-pin header on the WGR614v6 is for serial:
Well, *bleep*! Mine is only 1 meg. Enter a ? to get the list of directories or commands. At the root(?) level there's a bridge directory, in it are age, device, dump, show
That has me wondering if it might already have the ability to be configured as a wireless to wired bridge???