I was running an earlier build on my WRT320N 13357 I believe and it worked fine except for the clock running fast. A few days ago I flashed it to this build 14438M Big and it's been running just fine. The only problem I see is that the clock is still gradually gaining about 3 minutes a day.....
I was running an earlier build on my WRT320N 13357 I believe and it worked fine except for the clock running fast. A few days ago I flashed it to this build 14438M Big and it's been running just fine. The only problem I see is that the clock is still gradually gaining about 3 minutes a day.....
Posted: Thu May 20, 2010 14:23 Post subject: flash crashed WRT54G v1.1
I haven't had much trouble upgrading my WRT54G v1.1 using eko V24_TNG until now. Used the web interface to go from v24-14205_VINT_std to v24-14438_VINT_std. Flash seemed successful at first, but timed out trying to bring back up the web interface. Power light was in endless blinking loop, telnet down too. 30-30-30 reset didn't help it. At one point it wasn't pingable. I ended up having to short pins 15 & 16 to get it pingable and tftp up the old v23sp2-mini to get web interface access, then used that to flash back to 14205.
I experience a strange thing on my Asus RT-N16 with K26 big: setting WAN to "Static IP" the Gateway setting is not accepted. Any time I enter the gateway IP and save and / or apply setting all four fields are set back to 0
Flashed twice to confirm, nothing better after reflashing. Went back to Brainslayer 14289 and all fine again.
Anyone an idea about that?
I confirm the same problem. WAN and GW are in the same subnet. After upgrade to 14438 big Asus RT-N16 could not save GW settings-when I press Save button GW settings go to 0.0.0.0 I have downgrade FW to 14205 and everything is Ok. What's wrong?
@ luckman212 - no, afraid not. You just got to wait until they release a new build. _________________
Asus RT-AC66U DD-WRT v24-sp2 giga - build 25015 [Main]
Linksys E3000 DD-WRT v24-sp2 mega - build 15962 [Backup]
Linksys WRT600N v1.1 DD-WRT v24-sp2 (08/12/10) mega - build 14929 [Retired]
Linksys WRT54GS v4 DD-WRT v24-sp2 mini - build 15747 [Retired]
E3000 Info | WRT600N Info | Know-it-all thread
I was running an earlier build on my WRT320N 13357 I believe and it worked fine except for the clock running fast. A few days ago I flashed it to this build 14438M Big and it's been running just fine. The only problem I see is that the clock is still gradually gaining about 3 minutes a day.....