Posted: Wed Feb 20, 2013 20:07 Post subject: DIR-615 I1 client not working in all builds after r19519
As subject mention, only r19519, which is the first build for I1, works good with client.
All other (newer) builds (including the newest r20675) could not get sync with main router on client mode. For example, if the main router is on channel 11, I1 shows using channel 1. Then changed the main router to channel 1, I1 also changed its to channel 6.
The other issue on I1, it detects my main router only on G (54M) mode regardless the main router on mix or N-only mode. I have another C1 which works well to detect the main router as N (150M) mode.
My issue is the same setup works on r19519 but not for all newer versions. Is it HW limitation or SW bug which can be fixed? The WiKi tells me nothing for it.
The same setup also works on C1 as long as the radio is on.
I just want to report it to see if it is possible to be fixed or I did something wrong.
Joined: 03 Jan 2010 Posts: 7568 Location: YWG, Canada
Posted: Wed Feb 27, 2013 4:48 Post subject:
It is known but issue the command "dmesg" right after creating & attempting to connect to the virtual interface. It should be working with the next release, it is now working again as of r20733 on my 2 Atheros units. _________________ LATEST FIRMWARE(S)
BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers
It is known but issue the command "dmesg" right after creating & attempting to connect to the virtual interface. It should be working with the next release, it is now working again as of r20733 on my 2 Atheros units.
Thank you for the clarification and the work you have done. Now waiting the new release is uploaded.....