Yes, I read it. That is where I found USR 5461 hardware info, but that is openwrt and what I want to use is the micro edition of dd-wrt, then trying to figure out how to use an SD card reader on the USB port to increase capacity.
And since there is support for WRT54G v5 using micro edition, which has similar RAM & Flash, I'm just trying to confirm if is it possible(or not) to flash USR5461 with dd-wrt.
I've already flashed v23 sp3 and v24 micro generic into the router, it worked for a while. I can even setup the client bridge working with whr-g125 w/ dd-wrt v.24.
Then after I changed some settings on basic setup (connection type, local ip address, disable dhcp, etc.) then the router keeps rebooting every 5-10 seconds
I am a newbie in this area, so I do not have JTAG or CFE dump. but the factory firmware is a GPL open source, so you can find the firmware source code here
http://www.usr.com/support/s-gpl-code.asp
Maybe you can reference something in there source code to DD-WRT too for the USB and printer server support.
What is the best way to install dd-wrt.v24_std_generic.bin into the USROBOTICS 5461? since the standard file format from USROBOTICS is .USR and those ones are .BIN's