After much deliberation I got back to reformatting, repartitioning my usb drive and reinstalling otrw2 on my e4200 linksys router running the 22200M kingkong build.
I keep getting a "Optlog: Permission denied" message when I execute any 'service command to on/off/start/stop any of the service.
Looking for suggestions/directions to clear the error message.
Let me know if you need me to run any diagnostics that might help.
Thanks. _________________ ===================================
1 * DIR-866L - 29193 Mega (Main Gateway)
1 * EA4200 - 29193 Mega (Main Gateway)
1 * EA6500 - 29193 Mega (Repeater Bridge)
1 * EA6500v2 - 29193 Mega (Repeater Bridge)
1 * WRT610N - 29193 Mega (Repeater Bridge)
===================================
Alas, your hardware is not supported and I\'m sorry if all this gave you false hopes
Please provide feedback in this thread http://www.dd-wrt.com/phpBB2/viewtopic.ph p?t=59668
######
Optware installation was NOT successfull...
Your hardware is probably not compatible
model name : ARMv7 Processor rev 0 (v7l)
processor : 0
BogoMIPS : 1594.16
Features : swp half thumb fastmult edsp tls
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc09
CPU revision : 0
model name : ARMv7 Processor rev 0 (v7l)
processor : 1
BogoMIPS : 1594.16
Features : swp half thumb fastmult edsp tls
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc09
CPU revision : 0
Hardware : Northstar Prototype
Revision : 0000
Serial : 0000000000000000
I’m using Firmware: DD-WRT v24-sp2 (08/01/14) kongac
My understanding is it currently does not support ARM. Kong builds have a system installed that you can use for ARM (MUSL) telnet into the router and run
root# bootstrap to get going.
My understanding is it currently does not support ARM. Kong builds have a system installed that you can use for ARM (MUSL) telnet into the router and run
root# bootstrap to get going.
Thanks for the info , but when i run bootstrap i get the following :
s# bootstrap
Bootstrap is checking prerequisites...
USB automounte is enabled.
Echo optpart
No usable partition found.
root@DD-WRT:/jffs#
Another newcomer in trouble. Maybe there is someone who has nothing better to do than help me with this one: I am trying to follow this guide: http://www.dd-wrt.com/wiki/index.php/Optware,_the_Right_Way
And while downloading/installing optware I get this:
Quote:
root@DD-WRT:~# sh /tmp/prep_optware
date: can't stat '/opt/sbin/smbd': No such file or directory
sh: 2011: unknown operand
/tmp/prep_optware
Written on: Fri Apr 22 17:08:38 CEST 2011
Fri Sep 26 11:21:16 UTC 2014
If you're giving feedback, please post the version as well
This will take a while!
If you need to do some shopping.... do it now!
Connecting to ipkg.nslu2-linux.org (140.211.169.161:80)
ipk 100% |*******************************| 75850 0:00:00 ETA
Optware is not installed... Let's install it
Connecting to wd.mirmana.com (82.168.40.197:80)
- 100% |*******************************| 3954 0:00:00 ETA
Checking system config ...
Warning: /opt partition not empty!
Connecting to ipkg.nslu2-linux.org (140.211.169.161:80)
ipk 100% |*******************************| 75850 0:00:00 ETA
Installing package uclibc-opt_0.9.28-13_mipsel.ipk ...(wget -O /tmp/uclibc-opt_0.9.28-13_mipsel.ipk http://ipkg.nslu2-linux.org/feeds/optware/ddwrt/cross/stable/uclibc-opt_0.9.28-13_mipsel.ipk)
Some newer versions of DD-WRT does not show download progress bar,
so just be patient - or check STATUS -> BANDWIDTH tab for download
activity in your routers Web-GUI, and then still wait a minute or two.
Connecting to ipkg.nslu2-linux.org (140.211.169.161:80)
uclibc-opt_0.9.28-13 100% |*******************************| 832k 0:00:00 ETA
Updating /opt/etc/ld.so.cache
/tmp/postinst: line 6: /opt/sbin/ldconfig: Permission denied
Installing package ipkg-opt_0.99.163-10_mipsel.ipk ...(wget -O /tmp/ipkg-opt_0.99.163-10_mipsel.ipk http://ipkg.nslu2-linux.org/feeds/optware/ddwrt/cross/stable/ipkg-opt_0.99.163-10_mipsel.ipk)
Some newer versions of DD-WRT does not show download progress bar,
so just be patient - or check STATUS -> BANDWIDTH tab for download
activity in your routers Web-GUI, and then still wait a minute or two.
Connecting to ipkg.nslu2-linux.org (140.211.169.161:80)
ipkg-opt_0.99.163-10 100% |*******************************| 75850 0:00:00 ETA
Connecting to wd.mirmana.com (82.168.40.197:80)
Optware installation was NOT successfull...
Your hardware is probably not compatible
model name : ARMv7 Processor rev 0 (v7l)
processor : 0
BogoMIPS : 1594.16
Features : swp half thumb fastmult edsp tls
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc09
CPU revision : 0
model name : ARMv7 Processor rev 0 (v7l)
processor : 1
BogoMIPS : 1594.16
Features : swp half thumb fastmult edsp tls
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc09
CPU revision : 0
Hardware : Northstar Prototype
Revision : 0000
Serial : 0000000000000000