Posted: Mon Apr 26, 2010 7:28 Post subject: Re: How to change MAC address of AP ???
duongfx wrote:
Sometime you want to change BSSID of wireless AP to over MAC filter.I hear somebody can be do that in forum. I'm sure it not depend on firmware because i already change firmware sometime but BSSID still no change. Somebody help me!!
Here we are talking about TENDA W311R router. Don`t highjack my topic, build your own topic!
Posted: Mon Apr 26, 2010 18:13 Post subject: Tenda W311R
Yeah,i'm talking about Tenda w311R,i want to change the BSSID.This model can be Clone the MAC address of WAN but not support Clone for BSSID.
Well,nobody care about this problem !!!
Because I had alot of requests for a modified dir300 b1 dd-wrt firmware for this w311r router and nobody from dd-wrt team did it already, I had to hexedit 2 files for you guys.
Load one of this files to your w311r router and enjoy dd-wrt!
Have fun!
Can you tell me difference between these 2 files? (Or which version should I choose?)
Thank you in advance
Posted: Thu Dec 09, 2010 7:03 Post subject: Also works W307R - evil firmware 3.3.5r
I recently got myself a Tenda W307R router which had firmware 3.3.5j Aug 12 2009 out of the box. On Tenda's website the newest firmware appeared to be 3.3.5r Mar 17 2010 so I tried to install that using the router's web interface. Firefox wouldn't do it but IE did... but the firmware bricked the router. No SYS or WLAN lights, no response at any IP.
Inside, the board is a different rev but is laid out nearly identically to the one illustrated here. I followed the instructions here for making the serial connection and this is what it thought of the 3.3.5r firmware:
Quote:
U-Boot 1.1.3 (Dec 8 2009 - 13:38:58)
Board: Ralink APSoC DRAM: 32 MB
relocate_code Pointer at: 81fb0000
flash_protect ON: from 0xBF000000 to 0xBF01D663
flash_protect ON: from 0xBF030000 to 0xBF030FFF
*** Warning - bad CRC, using default environment
============================================
Ralink UBoot Version: 3.3
--------------------------------------------
ASIC 3052_MP2 (Port5<->None)
DRAM component: 256 Mbits SDR
DRAM bus: 16 bit
Total memory: 32 MBytes
Flash component: NOR Flash
Date:Dec 8 2009 Time:13:38:58
============================================
icache: sets:256, ways:4, linesz:32 ,total:32768
dcache: sets:128, ways:4, linesz:32 ,total:16384
###### The CPU freq = 384 MHZ ####
SDRAM bus set to 16 bit
SDRAM size =32 Mbytes
Please choose the operation:
1: Load system code to SDRAM via TFTP.
2: Load system code then write to Flash via TFTP.
3: Boot system code via Flash (default).
4: Entr boot command line interface.
9: Load Boot Loader code then write to Flash via TFTP. 0
3: System Boot system code via Flash.
## Booting image at bf050000 ...
Image Name: linkn Kernel Image
Created: 2009-11-20 1:47:15 UTC
Image Type: MIPS Linux Kernel Image (lzma compressed)
Data Size: 2288610 Bytes = 2.2 MB
Load Address: 80000000
Entry Point: 803de000
Verifying Checksum ... Bad Data CRC
Bad CRC. Same result when I reuploaded it... so it wasn't the web interface's fault.
I uploaded the 3.3.5h Mar 17 2010 firmware, this is now working just fine. Assuming the dates are right, note that their rev indication is odd -- this firmware is newer than the 3.3.5j it shipped with. Also, I noticed that the 3.3.5r file is actually dated Mar 10 2010 once you unzip it -- also older than the 3.3.5h.
I'm happy enough now to be getting more than 15 minutes' use of this router that I'm leaving the dd-wrt experiment to others!
Hi I have a tenda w311r.I am a n00b with routers.
I am interested in trying out dd-wrt.And am willing to try out on mine.
I wanted to ask a few things again just to clarify and be safe:
1)can i know if mine is H1 or H2 without opening it?
i checked my firmware in browser's page its firmware is "H1_V3.3.6b_EN-Mar 1 2010" which i suspect means i have h1 (start of the firmware name). [i had updated to tenda's latest firmware]
2)Is there any way i can install on H1 (if its H1)
Posted: Sun May 15, 2011 20:50 Post subject: W311R+
What is the speed of console at original firmware W311R+? It is also 57600?
Because I tried almost everything and with MAX232, USB/RS-232 (both from Profilic and FTDI) + putty ... I get only strings like "ëfűű#ćäÓÎh3Ätd3&f".
Have you tried the normal way, from
System -> Update Firmware ? what is the problem ?
Fix the ip in your computer network adapter to be 192.168.0.9.
Keep pressed the reset button in the router, then power it up.
Release the button after about 10s. Access http://192.168.0.1, and you should be in the emergency firmware recover page. From there, just upload the right firmware.
Have you tried the normal way, from
System -> Update Firmware ? what is the problem ?
Fix the ip in your computer network adapter to be 192.168.0.9.
Keep pressed the reset button in the router, then power it up.
Release the button after about 10s. Access http://192.168.0.1, and you should be in the emergency firmware recover page. From there, just upload the right firmware.
1.Thanks for your help
The new firmware v3.2.4.02s is successful installed, but it have got bugs: mac address of WAN is 00:00:00:00:00:00 and can not turn off WPS. I want to install back H2_v3.2.4h. My network card is get ip automatically and when I go to 192.168.0.1, in upgrade and put new firmware H2_v3.2.4h and click on upgrade and then ok is write " whe new firmware bust be unless than ( 700-800 )kb I am not sure how many it was. From Tenda Support I know that I can not upgrade to another version. What can I do to back H2_v3.2.4h Thanks in advance